Results 1 to 5 of 5

Thread: P5K query

  1. #1
    Thundercats Ho! starbuck's Avatar
    Join Date
    Feb 2004
    Location
    Portsmouth
    Posts
    1,327
    Thanks
    9
    Thanked
    29 times in 19 posts
    • starbuck's system
      • Motherboard:
      • P5K Deluxe Wi-Fi
      • CPU:
      • E6600
      • Memory:
      • 4gb
      • Storage:
      • 2x500gb Samsung spinpoint in raid 0, 320gb diamondmax SATA
      • Graphics card(s):
      • GT240
      • PSU:
      • Enermax Galaxy 850watt
      • Case:
      • Silverstone TJ05
      • Operating System:
      • Windows 7 Home Premium
      • Monitor(s):
      • 20" Dell(rebadged sony) trinitron CRT
      • Internet:
      • 20mb cable internet connection

    P5K query

    I have setup my new rig running the p5k.

    I have 3 hard drives installed, 2 500gb samsungs setup in raid and a 320gb drive for storage.
    I hade to set the sata option in bios for raid but this means that the 320gb drive does not show up(and neither do my IDE optical drives at the moment).

    What option do I need to choose in the bios to get these to show?

    btw, as this is the 1st time I've used dual channel ram, what does interleaved mean(shows on post dual channel interleaved).
    Last edited by starbuck; 07-07-2007 at 10:30 PM.
    I do know everything, just not all at once. It's a virtual memory problem.

  2. #2
    Member
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    82
    Thanks
    9
    Thanked
    7 times in 4 posts
    • gLk*zaP's system
      • Motherboard:
      • Asus P5K Deluxe WiFi P35
      • CPU:
      • Intel E6850, Noctua 2x 120mm Air
      • Memory:
      • 2x1GB OCZ Platinum Rev2 DDR2-800 CL4
      • Storage:
      • Samsung SP2504C 3x 250GB
      • Graphics card(s):
      • Asus GeForce 7950GT 512MB PCIe
      • PSU:
      • Seasonic SS12-650HT
      • Case:
      • Chieftec CS-101
      • Monitor(s):
      • Hyundai L90D+
      • Internet:
      • 1.5 MBit/s DSL
    On the raid part, i have to admit i dont know for sure (i got plenty of drives, but none empty to create an array). But i think it should work like you set it up. SATA controller in RAID mode, then create array with those 2 drives. Use the third drive as normal drive on the controller too. What does the crappy asus manual say about it?

    Interleaved mode is totally normal, shows on every board (depending on bios i guess).
    Mainboard: Asus P5K Deluxe WiFi, Bios 0501 CPU: Intel Core 2 Duo E6850 @ 3.3 GHz 8x415 1.35v C1E/PECI
    Heatsink: Noctua NH-U12F, Noctua 120mm Fan, AS5 RAM: 2x1GB OCZ Platinum DDR2 @ 1067 MHz 5-5-5-15
    PSU: Seasonic SS12-650HT 4x 18A/12v Graphics: Asus GeForce 7950GT 512MB passive cooled with Accelero S1
    Case: Antec P182-SE Chrome Edition OS: XP x86
    SuperPI 1M: 13.187 sec (@3.92GHz) 3DMark06: 5.564, CPU 2.646 (@3.0GHz)

  3. #3
    Senior Member
    Join Date
    Dec 2005
    Posts
    423
    Thanks
    1
    Thanked
    2 times in 2 posts
    it seems ok - i had 2x320 in raid0 and a pair of 160s non-raid, and it saw it fine.
    Intel q6600 3.6ghz
    Asus P5K-Deluxe WiFi
    4Gb OCZ ReaperX at 1000Mhz
    768Mb BFG 8800GTX
    2xWD1001FALS in RAID0
    Dtek Fuzion / 2xPA120.2 / DDC01Ultra+PetrasTech top / EK 8800GTX FC Block
    Audigy 2ZS
    Thermaltake Mozart TX

  4. #4
    Thundercats Ho! starbuck's Avatar
    Join Date
    Feb 2004
    Location
    Portsmouth
    Posts
    1,327
    Thanks
    9
    Thanked
    29 times in 19 posts
    • starbuck's system
      • Motherboard:
      • P5K Deluxe Wi-Fi
      • CPU:
      • E6600
      • Memory:
      • 4gb
      • Storage:
      • 2x500gb Samsung spinpoint in raid 0, 320gb diamondmax SATA
      • Graphics card(s):
      • GT240
      • PSU:
      • Enermax Galaxy 850watt
      • Case:
      • Silverstone TJ05
      • Operating System:
      • Windows 7 Home Premium
      • Monitor(s):
      • 20" Dell(rebadged sony) trinitron CRT
      • Internet:
      • 20mb cable internet connection
    now seems ok after i played about with the sata ports i was using
    I do know everything, just not all at once. It's a virtual memory problem.

  5. #5
    Member
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    82
    Thanks
    9
    Thanked
    7 times in 4 posts
    • gLk*zaP's system
      • Motherboard:
      • Asus P5K Deluxe WiFi P35
      • CPU:
      • Intel E6850, Noctua 2x 120mm Air
      • Memory:
      • 2x1GB OCZ Platinum Rev2 DDR2-800 CL4
      • Storage:
      • Samsung SP2504C 3x 250GB
      • Graphics card(s):
      • Asus GeForce 7950GT 512MB PCIe
      • PSU:
      • Seasonic SS12-650HT
      • Case:
      • Chieftec CS-101
      • Monitor(s):
      • Hyundai L90D+
      • Internet:
      • 1.5 MBit/s DSL
    Glad to hear it worked out for you. Have to remember the thing about the different ports when i use the raid function one day. Thank you.
    Mainboard: Asus P5K Deluxe WiFi, Bios 0501 CPU: Intel Core 2 Duo E6850 @ 3.3 GHz 8x415 1.35v C1E/PECI
    Heatsink: Noctua NH-U12F, Noctua 120mm Fan, AS5 RAM: 2x1GB OCZ Platinum DDR2 @ 1067 MHz 5-5-5-15
    PSU: Seasonic SS12-650HT 4x 18A/12v Graphics: Asus GeForce 7950GT 512MB passive cooled with Accelero S1
    Case: Antec P182-SE Chrome Edition OS: XP x86
    SuperPI 1M: 13.187 sec (@3.92GHz) 3DMark06: 5.564, CPU 2.646 (@3.0GHz)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Recommend an Oracle query optimisation book or course
    By manwithnoname in forum Software
    Replies: 1
    Last Post: 22-01-2007, 12:20 PM
  2. ASP querystring database query
    By pritsey in forum Software
    Replies: 2
    Last Post: 30-12-2006, 01:31 AM
  3. Could you check this RMA query please?
    By DaveOwl in forum SCAN.care@HEXUS
    Replies: 15
    Last Post: 10-12-2006, 05:19 PM
  4. No reply to query sent Friday 17th
    By Skinleech in forum SCAN.care@HEXUS
    Replies: 8
    Last Post: 23-11-2006, 03:56 PM
  5. RMA Query
    By billythewiz in forum SCAN.care@HEXUS
    Replies: 7
    Last Post: 07-11-2006, 05:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •