gigabyte ds3 SPD settings

hi all when overclocking my comp i get this readout



CPU Type DualCore Intel Core 2 Duo E4300
Engineering Sample Yes
CPUID CPU Name Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
CPUID Revision 000006F2h
Core Voltage 1.325 V


CPU Clock 3060.0 MHz (original: 1800 MHz, overclock: 70%)
CPU Multiplier 9.0x
CPU FSB 340.0 MHz (original: 200 MHz, overclock: 70%)
Memory Bus 340.0 MHz
DRAM:FSB Ratio 1:1

Motherboard Properties
Motherboard Name Gigabyte GA-965P-DS3 (3 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio)

Chipset Properties
Motherboard Chipset Intel Broadwater P965
Memory Timings 5-6-6-17 (CL-RCD-RP-RAS)
Command Rate (CR) 2T

SPD Memory Modules
DIMM1: Corsair XMS2 CM2X1024-5400C4 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
DIMM3: Corsair XMS2 CM2X1024-5400C4 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)

BIOS Properties
System BIOS Date 05/28/07
Video BIOS Date 04/04/07
Award BIOS Type Award Modular BIOS v6.00PG
Award BIOS Message Intel P965 BIOS for 965P-DS3 F12
DMI BIOS Version F12

now as you can see my memory timings are c**p i cant find anywhere in my bios (f12) to tighten them up a little.

any help?

Ctrl+F1 from the bios.

Yup ctrl + f1 will give you the advanced options. I've gotten my E4300 on the same board as you at £ GHz rock stable at stock volts. I basically took the spd muliplyer down to 2x and then put the host FSB upto to 300 MHz and off she went :)

Quote:

---

Originally Posted by Behemoth

Yup ctrl + f1 will give you the advanced options. I've gotten my E4300 on the same board as you at £ GHz rock stable at stock volts. I basically took the spd muliplyer down to 2x and then put the host FSB upto to 300 MHz and off she went :)

---

300 x 9 = 2700.

i am on 340 x 9 to give me 3060. spd is at 2 but i am getting crazy timings on my ram, stock volts mind but my ram is rated to 675 @4-4-4-12

also weird that no where in the bios does it say ctrl +f1!

I might be wrong then lol might something like 333 x 9 then. been a while since a looked in the bios.

You've got the same RAM as i have too by the looks of it.

will be tightning those timings up tonight, thanks for the inside info ctrl+f1! damn those gigabyte boys!