Printable View
hey guys just switched back to air cooling due t my new case not being ideal for water cooling so obviously my temps are a lot different so was wondering if you could advise me
running my e6400 at 3.0ghz takes 1.35v and at load she hits 60c and 45c idle
at 2.6ghz at 1.3v she does 52c load and 40c idle
what are these temps like is the one at 3ghz a little high am currently using a ac freezer 7 pro
It's a bit warm imo, but not disasterously so. Using the Tuniq Tower 120 i'm 48c under load & 34c @ 3.6 with an E6600
Quote:
Originally Posted by 0iD
thought it was a little think i'll run her at 2.6 then at least until crysis comes out and then i might need more power
although as well it is pretty humid down here so my cpu temp have gone up about 6c since april when the weather was fresher
sucks really wont stop raining but its also really humid
Is that with the pc in the freezer...or just the fridge? :angst:Quote:
Originally Posted by 0iD
That's in my living room, under the desk, on a normal day & 6 case fans. It runs folding on both cores so it's always loaded. Even on the hottest days it reaches 52c according to my uGuru clock & the DigiDoc.
Thats impressive. I get similar temps clocked at 3.4ghz with the arctic freezer..
seems 2.8ghz is a nice speed for my cpu only have to put 1.3v to get it stable and she does 39 idle and 45-50 at load think that should do for now
What vcore are you using for 3.6?Quote:
Originally Posted by 0iD
Vcore 1.4225
MCH @ 1.35
CPUVTT @ 1.3
ICH @ 1.1
ICHIO @ 1.6
DDR2 @ 2.2
Looks like a nice chip you have there then, is that stable in orthos? :)
yes & no, ran it 3 times on the trot, first 2 times it stopped within seconds, then ran fine for over an hour.