Originally Posted by
fat jez
No, just the CPU. ok
Yate Loons 120mm fans running at 12v ok
The D-Tek mounts with 4 long bolts through the motherboard, which the block fits over and then you tighten it down with 4 nuts against 4 springs, one on each bolt. Yes, I have one!. Unfortunately, if you dont use a backplate, the board bends, and you can lose contact slightly with the CPU. A Thermalright backplate will set you back about a fiver.
Well, the nuts are as tight as I can get them. Try the tweaking method, it does work, but get a backplate as well, its well worth a fiver :)
One straight line across the middle of both cores. ok
It's possible, although the bleed screw at the top does produce water when it is undone. ok
Cheers,
Stephen