-
I Need overclocking help
Gonna order me next week part 2 build me my computer. I dont no anything about overclocing. can an expert help me. I want 2 overclock e6600 to a 3.0
these are some of part i will order
memory http://www.newegg.com/Product/Produc...82E16820231098
motherboard
http://www.newegg.com/Product/Produc...82E16813188019
processor
http://www.newegg.com/Product/Produc...82E16819115003
cpu coller
http://www.newegg.com/Product/Produc...82E16835118019
power supply
http://www.newegg.com/product/Produc...82E16817182077
i need instructions from a-z can anyone help me. Also will i have to overclock ram 2 i would like to keep it as 800 and just overclock the processor to a 3.0
-
-
Doesnt cover 680i boards mine mate :)
This may be of use.
-
yea but can i leave memory alone at 800 and just increase the fps for processor to a 350x9 and make it a 3150 and how much volts should i put. Im scared of overclocking i don't want to destroy my system.
-
Have you read the guide in the link I posted for you?
-
I read a lot of guide before few days but im terrible at understanding's it all. Also i tired 2 print that guide out but the latters are cut off some of them
-
what about ntune would it be better 2 overclock with that?
-
Bios is far better and once you get to grips with it more control.
Just take your time and slowly increase the overclock.
I wont go over the stuff clunk has linked too, if you do things slowly you wont destroy your system. A cmos reset will usually cure your ills. Most mobos will not allow the cpu to over temp.
i would have a break DusanTisma and then re read from the link clunk has given you. If its not printing out properly save a copy to the hard disk and write down the relevant bits.
