E4300 , DS2R help:)

i have the following hardware

Sugo SG01 e
E4300 C2D
Gigabyte DS2R
2x1gb Cellshock pc 8000 good for 1000mhz @ 5-5-5-15 2.2v
500w Silverstone PSU
x1950xtx
xfi

and i am running F2 bios, basically i understand that because there is no official 1:1 ratio/divider for 800mhz cpu's you need some dam good memory.

so i have 2 options in the bios on the memory spd multiplier, 3.33 and 4

so if i choose 3.33 this means 333mhz bus speed, so 333x9 = 2997 (3ghz)

so then the memory would be sat at 555mhz, and that is over my 1000mhz ram. although i could loosen the timings obviously.

so can i not go for a 3ghz overclock. something more relaxed like 2.4 etc

can anyone help me out. i am getting confused, i mean i know i could set 250x9 etc and leave the memory divider at auto.

so what is the point in setting it to 333mhz in the first place?

anyone :(

Quote:

---

Originally Posted by Pie_uk

hello bit-tech,

---

:angst:

ugh, sorry, i postedthat very late at night, copied and pasted it, anyway . answered my own question, i understand whats going on now !