Page 1 of 2 12 LastLast
Results 1 to 16 of 19

Thread: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

  1. #1
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Hi, im putting together a PC for a friend. Its not being used as a media centre, but I like keeping PCs smallish.

    The idea is a pc with adequate power for normal home tasks that should last and stay upto date for about 3 years.

    The CPU has been chosen with the idea its fine for now and in 3 years it can be easily and cheaply upgraded on the board i have picked (which also offers great upgrade options due to its modern chipset).

    Heres a list of what im thinking of, any thoughts/comments are greatly appreciated:

    All stock has been picked from Ebuyer and the codes featured are Ebuyer product quickfind codes, except the mobo which is now out of stock there and is likely to be ordered from Scan instead,

    135583 EV Black MATX Cube Case, No PSU - 12cm Blue LED Fan
    129422 Extra Value Black 500W PSU - With 12cm Blue LED Fan
    132268 Gigabyte GA-G33M-S2 iG33 Socket 775 onboard video mATX Motherboard
    127248 Intel E2160 775 Pentium Dual Core 2x1.8Ghz 800FSB Retail Boxed Processor
    129954 Kingston 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 Memory
    130454 Samsung SpinPoint HD501LJ 500GB SATAII Hard Drive 16MB Cache
    132282 LiteOn DH-20A3H 20x DVD?RW-RAM DL Lightscribe IDE Int Black

    Since theres going to be no gaming involved, I might stick with the onboard GFX (theres plenty of RAM and a good chipset) or just fit a basic card.

    Sincethe CPU is retail boxed im assuming it includes a "stock" heatsink/fan unit?

    As far as I can think, that should do the job nicely. Total price with delivery = £251 (excluding GFX card).

    Any thoughts?

  2. #2
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Quote Originally Posted by P2W View Post
    Hi, im putting together a PC for a friend. Its not being used as a media centre, but I like keeping PCs smallish.

    129422 Extra Value Black 500W PSU - With 12cm Blue LED Fan

    Any thoughts?
    if you value the friendship get a proper psu.

    Antec NSK 3480 Micro ATX Case - 380W Earth Watts PSU

    or just the psu
    Antec EarthWatts 380W PSU

    the cpu comes with a fan yeah.
    Last edited by staffsMike; 23-01-2008 at 02:16 AM.

  3. #3
    Folding Flunkie Webby's Avatar
    Join Date
    Sep 2007
    Location
    Wiltshire
    Posts
    2,323
    Thanks
    12
    Thanked
    245 times in 229 posts
    • Webby's system
      • Motherboard:
      • Gigabyte G33M-DS2R, Swiftech MCW30 Northbridge Cooler
      • CPU:
      • Intel Core 2 Duo E6550 @ 3.5GHz, Cooling D-Tek Fuzion V2
      • Memory:
      • 2GB OCZ Flex DDR2 PC2-9200 5-5-5-15 @ 1000MHz 4-4-4-12
      • Storage:
      • 2x 250GB WD SataII
      • Graphics card(s):
      • Sapphire HD4870 512MB, Cooling Swiftech MCW60
      • PSU:
      • Corsair HX520w
      • Case:
      • Silverstone Tremjin TJ06 - Modded for Water Cooling Goodness
      • Operating System:
      • Windows XP Pro SP3
      • Monitor(s):
      • 22" Widescreen Cibox C2201 (with DVI input)
      • Internet:
      • 8Mb/s ADSL

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    I will say it before Hexy gets here... You will need to include an OS so windows ~£50 unless you/they already own a full retail copy or you are planning on using Linux.

    On to the spec you will be unlikely to update anything on that board in 3 years in all likely hood memory will have moved on past DDR2 and Intel will no longer be using the same socket. But don't let that put you off.

    I would personally use a better PSU, a cheap PSU is no saving in the long run as when they blow they tend to take other things with them as well. Corsair VX450 would be more than adequate for your needs (£48 on eBuyer) or the Antec Earthwatts 430w (£40 again eBuyer).

    If your not planning on overclocking at all then these could be options as well

    Antec NSK1380 Black/Silver MATX Cube Case - With 350W PSU - Ebuyer

    or
    Antec NSK3480 MATX Micro Tower - With 380W EarthWatts PSU ATX12V 2.2 USB/FireWire/Audio - Ebuyer

  4. #4
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    [QUOTE=staffsMike;1317933]if you value the friendship get a proper psu.

    LMAO, fair comment, Your not the first to point out about the PSU.

    If im honest, while I know other PSUs are better. Its a shame because the one I listed above matches the case absolutely perfectly (cosmetically)(black with blue LED) but alas, I think I best go for reliability & performance over fancy looks inside.

  5. #5
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Quote Originally Posted by Webby View Post
    thief

  6. #6
    Folding Flunkie Webby's Avatar
    Join Date
    Sep 2007
    Location
    Wiltshire
    Posts
    2,323
    Thanks
    12
    Thanked
    245 times in 229 posts
    • Webby's system
      • Motherboard:
      • Gigabyte G33M-DS2R, Swiftech MCW30 Northbridge Cooler
      • CPU:
      • Intel Core 2 Duo E6550 @ 3.5GHz, Cooling D-Tek Fuzion V2
      • Memory:
      • 2GB OCZ Flex DDR2 PC2-9200 5-5-5-15 @ 1000MHz 4-4-4-12
      • Storage:
      • 2x 250GB WD SataII
      • Graphics card(s):
      • Sapphire HD4870 512MB, Cooling Swiftech MCW60
      • PSU:
      • Corsair HX520w
      • Case:
      • Silverstone Tremjin TJ06 - Modded for Water Cooling Goodness
      • Operating System:
      • Windows XP Pro SP3
      • Monitor(s):
      • 22" Widescreen Cibox C2201 (with DVI input)
      • Internet:
      • 8Mb/s ADSL

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Quote Originally Posted by staffsMike View Post
    thief
    I went away mid reply... no replies when I started

    And I included a Cube case as an option

  7. #7
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Hi Webby, thanks for the response. Il have a look into the links in the morning (the Ebuyer site is not coming up for me atm)

    With regards upgrading the CPU, I should have explained. I meant il fit an E2160 now cause it will do the job and is cheap and then in three years, if needed can simply swap it for a higher end skt 775 CPU which by then will be a fraction of the price they are now (eg a Q6000 series etc).

    Likewise, RAM, you never know what they mgt need in 3 years time, but 2gb will do for now easily and if needed the board will go upto 8gb. In the same way SDRAM is still available, DDR2 wont be a problem to come by.

  8. #8
    Comfortably Numb directhex's Avatar
    Join Date
    Jul 2003
    Location
    /dev/urandom
    Posts
    17,074
    Thanks
    228
    Thanked
    1,027 times in 678 posts
    • directhex's system
      • Motherboard:
      • Asus ROG Strix B550-I Gaming
      • CPU:
      • Ryzen 5900x
      • Memory:
      • 64GB G.Skill Trident Z RGB
      • Storage:
      • 2TB Seagate Firecuda 520
      • Graphics card(s):
      • EVGA GeForce RTX 3080 XC3 Ultra
      • PSU:
      • EVGA SuperNOVA 850W G3
      • Case:
      • NZXT H210i
      • Operating System:
      • Ubuntu 20.04, Windows 10
      • Monitor(s):
      • LG 34GN850
      • Internet:
      • FIOS

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    considered a shuttle? you can get the same mobo chipset as above, so will have just as much future proofing on things like memory and cpu (i.e. not necessarily much) but it'll be much smaller than a matx system

  9. #9
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Hi, I run a Shuttle myself but the two issues are 1) PSU reliability (this might have improved since the skt 478 G series) and 2 price.

    The case, mobo and PSU combinaton comes to about £120 (if i go for a truepower PSU) and every part is then standard (i.e MATX as opposed custom (flex?) sized mobo, standard PSU etc).

    I dont think there are any Shuttles in that kind of budget that could offer spec of what ive suggested.

    I love Shuttles and also would normally be the 1st to reccomend one but for this build decided to play it safe so if ever a part goes wrong it can be easily replaced.

  10. #10
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Likewise did look at other SFF barebone options, but none seemed to offer the spec/combination I was after.

    While I apprecaite PSUs can vary, i wanted to play it safe as thats the part that has gone on the PC I am building to replace. Most SFF PCs had custom PSUs or spec (and i appreciate it doesnt need hundreds of watts and numbers ar peak etc, but still need something) that didnt convince me they would be comfortable with dual core CPUs.

    I thought best not compromise too much so think il go with a 380w Antec PSU from Ebuyer for just £30, it means i lose the pretty and matching looks but gain reliability & a more sensible spec PSU for jsut £13 more, a bargain really.

  11. #11
    HSK
    HSK is offline
    Over Worked & Under Paid HSK's Avatar
    Join Date
    Nov 2007
    Location
    West London
    Posts
    2,369
    Thanks
    451
    Thanked
    139 times in 111 posts
    • HSK's system
      • Motherboard:
      • Asus Z87-Pro Socket 1150 DVI HDMI DisplayPort 8-channel Audio ATX Motherboard
      • CPU:
      • Intel Core i7 4770K 3.50GHz Socket 1150 8MB Cache
      • Memory:
      • Corsair Vengeance LP Memory CML16GX3M2A1600C9 16GB 1600MHz CL9 DDR3
      • Storage:
      • Seagate 2TB BARRACUDA 3.5" SATA-III Hard Drive - 7200RPM 64MB Cache X 2 + Samsung 256GB 840 Pro SSD
      • Graphics card(s):
      • Point Of View 8800GTS 512mb PCIE DVI
      • PSU:
      • Corsair Professional AX860 Fully Modular 80 PLUS Platinum 860W PSU
      • Case:
      • Corsair Graphite 600T Mesh Black Case
      • Operating System:
      • Windows 8.1
      • Monitor(s):
      • Dell UltraSharp U2713HM 69cm (27")
      • Internet:
      • Plus.net

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    I have the earthwatts 380 PSU (came with my antec case), decent and has been doing the job.

  12. #12
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,986
    Thanks
    781
    Thanked
    1,588 times in 1,343 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    At that price point AMD offers better and cheaper platform. You also get the option of integrated graphics that don't totally suck and crash at the sniff of something more than minesweeper.

  13. #13
    P2W
    P2W is offline
    Registered+
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    26
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Hi, #12 (DanceswithUnix), you getting me nor this thread turned into an Intel vs AMD discussion, Im sure both companies offer different advanatages and dis-advantages, regardless im happy to stick to what I know and build using Intel.

    Well my latest update on this system is as below

    £30.32 EV Black MATX Cube Case, No PSU - 12cm Blue LED Fan (Ebuyer 135583)
    £29.99 Antec EarthWatts 380W 80%+ Efficiency PSU - 80mm Fan (Ebuyer 120375)
    £58.39 Gigabyte GA-G33M-S2 iG33 Socket 775 onboard video mATX Motherboard (Scan LN18964)
    £44.56 127248 Intel E2160 775 Pentium Dual Core 2x1.8Ghz 800FSB Retail Boxed+Processor (Ebuyer £44.56)
    £30.01 Kingston 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 Memory (Ebuyer 129954) OR
    £28.89 2GB (2x1GB) Corsair TwinX XMS2, DDR2 PC2-5400 (667), 240 Pin, Non-ECC Unbuffered (Scan LN12200)
    £56.99 Samsung SpinPoint HD501LJ 500GB SATAII Hard Drive 16MB Cache (Ebuyer 130454)
    £17.03 Samsung SH-S202N/BEBN 20x DVD±R, Lightscribe, Black, OEM inc. Nero (Scan LN19998)

    Using the more expensive RAM, that means for a funky little cube shaped PC that uses standard parts throughout and can be alter upgraded to 8gb RAM and any current dual/quad core CPU, total is £267.29 including delivery.

    Its not needed but I might add a basic, something like £17 gfx card to that too which would still bring it in at less than £285, bargain!

  14. #14
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,986
    Thanks
    781
    Thanked
    1,588 times in 1,343 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    Apologies if my comment came over abrasive, I must have been having a bad day.

    Both companies do indeed have their good and bad points, I was just trying to point out that IMHO the good point of AMD is in building excellent budget systems, specially if the end user is scared of overclocking (and lots are).

    That will be a very capable machine.

    As for the graphics card: as someone who spent £14 a 7200GS on the basis it would only ever be plugged into a server and doing 2D, the day I needed it to just play World of Warcraft I regretted not spending the extra tenner and getting something 2 or 3 times the power.

    There are some bargains under 30 quid though, specially on the daily offer pages.

  15. #15
    Senior Member
    Join Date
    Jul 2007
    Posts
    519
    Thanks
    2
    Thanked
    16 times in 14 posts
    • McPhee's system
      • Motherboard:
      • Asus P8H67 Pro
      • CPU:
      • Intel i5 2400
      • Memory:
      • 4GB Crucial DDR3-1033
      • Storage:
      • 128GB Kingston SSDNow V2+
      • Graphics card(s):
      • Asus GTX460
      • PSU:
      • BeQuiet 550W
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 19" Samsung 941BW
      • Internet:
      • 1Mbps

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    I would have to agree with Dances tbh. You can build a similarly powerful AMD machine for £220 including a semi-decent integrated GPU. What is the extra £60 really buying here?

  16. #16
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: MATX Mini PC Potential Build, Help, Thoughts & Comments, Pleeeaasseee

    G33's are pretty decent overclockers and given the 800MHz fsb of the CPU and 1333MHz fsb of the board that is a healthy overclock before you are even overclocking the board.

    If you aren't overclocking though I would go AMD. £65 for the 5000+ black edition is a very nice deal at the moment. It has an unlocked multiplier and overclocks to 3.2GHz with relative ease.

    Strap it so something like the Asus M2A-VM (£35) and you have got a nice little setup. I have these two together and it runs very sweetly

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Suggested Build, thoughts?
    By Montav3r in forum PC Hardware and Components
    Replies: 14
    Last Post: 24-07-2007, 02:10 PM
  2. Mini ITX Build
    By dave87 in forum PC Hardware and Components
    Replies: 14
    Last Post: 21-05-2007, 02:13 PM
  3. Possible new build, all comments welcome
    By teachmech in forum PC Hardware and Components
    Replies: 7
    Last Post: 22-07-2006, 08:26 PM
  4. Comments on potential new system please
    By DaKid in forum PC Hardware and Components
    Replies: 31
    Last Post: 08-08-2004, 10:08 PM
  5. Replies: 10
    Last Post: 22-05-2004, 12:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •