Page 2 of 3 FirstFirst 123 LastLast
Results 17 to 32 of 33

Thread: new rig - 3dmark 06 results

  1. #17
    Formerly known as Andehh Andeh13's Avatar
    Join Date
    Oct 2005
    Location
    Northampton
    Posts
    3,354
    Thanks
    855
    Thanked
    258 times in 153 posts
    • Andeh13's system
      • Motherboard:
      • Gigabyte GA-P35
      • CPU:
      • Intel Q6600
      • Memory:
      • 4gb Corsair XMS2 800mhz
      • Storage:
      • 1 x 250gb Western Digital AAKS, 2 x 500gb Western Digital AAKS, 1TB WD Caviar Green
      • Graphics card(s):
      • BFG Geforce 8800GTS 512mb
      • PSU:
      • Corsair HX520
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7 64bit
      • Monitor(s):
      • Samsung 24" & Sony 17"
      • Internet:
      • Virgin 10mb... hate them!

    Re: new rig - 3dmark 06 results

    I got 8575 with my current setup, i was expecting higher though. Nothing is o/c.

    Anyone care to comment, specs are in my system.
    <<

    cheers guys

  2. #18
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: new rig - 3dmark 06 results

    Even with no OC that seems low. What is the breakdown of the 8575 - the three parts of the score?

  3. #19
    Lover & Fighter Blitzen's Avatar
    Join Date
    Oct 2006
    Location
    Between Your Mum & Sister
    Posts
    6,310
    Thanks
    539
    Thanked
    382 times in 300 posts
    • Blitzen's system
      • Motherboard:
      • ABIT iX38 QuadGT
      • CPU:
      • Intel Quad Q6600 @ 3.6Ghz : 30 Degrees Idle - 41-46 Degrees Load
      • Memory:
      • 4 x 1GB OCZ Platinum PC6400 @ 4-4-4-12
      • Storage:
      • 2 x 500GB Samsung Spinpoints - RAID 0
      • Graphics card(s):
      • GTX 285
      • PSU:
      • Enermax MODU 82+ 625W
      • Case:
      • Antec Nine Hundred
      • Operating System:
      • Windows 7 Ultimate 64Bit
      • Monitor(s):
      • Viewsonic Q22wb 22" Widescreen - 5ms
      • Internet:
      • O2 premium @ 17mb

    Re: new rig - 3dmark 06 results

    Quote Originally Posted by Andehh View Post
    I got 8575 with my current setup, i was expecting higher though. Nothing is o/c.

    Anyone care to comment, specs are in my system.
    <<

    cheers guys

    At stock, on 3D Mark 06, i wouldve expected between 10k - 11k minimum.

    Theres something not right there.

  4. #20
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: new rig - 3dmark 06 results

    Quote Originally Posted by Andehh View Post
    I got 8575 with my current setup, i was expecting higher though. Nothing is o/c.

    Anyone care to comment, specs are in my system.
    <<

    cheers guys
    thats not right, are all the cores enabled? as i got 13k stock and mine is pretty similar to yours, yours should be higher simply because 3dmark will use all cores(upto 4).

    Gfx card set proper?

  5. #21
    Formerly known as Andehh Andeh13's Avatar
    Join Date
    Oct 2005
    Location
    Northampton
    Posts
    3,354
    Thanks
    855
    Thanked
    258 times in 153 posts
    • Andeh13's system
      • Motherboard:
      • Gigabyte GA-P35
      • CPU:
      • Intel Q6600
      • Memory:
      • 4gb Corsair XMS2 800mhz
      • Storage:
      • 1 x 250gb Western Digital AAKS, 2 x 500gb Western Digital AAKS, 1TB WD Caviar Green
      • Graphics card(s):
      • BFG Geforce 8800GTS 512mb
      • PSU:
      • Corsair HX520
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7 64bit
      • Monitor(s):
      • Samsung 24" & Sony 17"
      • Internet:
      • Virgin 10mb... hate them!

    Re: new rig - 3dmark 06 results

    I use dual screen & had both enabled so i could watch & saw the 4 cores red line using a windows sidebar gadget, so i know all 4 cores worked properly.

    afaik the gfx is setup correctly, i play team fortress 2 on full on a 24" screen without any problems. That being said, i had had problems with it the last few weeks not responding & causing the PC to hang then refuse to boot. System restore in safe mode sorted this though.


    The individual scores:
    SM 2.0 Score 3239
    SM 3.0 Score 4224
    CPU Score 2353

    graphics FPS averaged at 26-27 fps
    CPU - 0.77-1.16 fps
    HDR 35-49 fps

    cheers guys

  6. #22
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: new rig - 3dmark 06 results

    Your graphics scores are very low. The CPU I'm putting down to being at stock.

    Was this the same machine that you had the Partition problem?

    Check out what your voltages are doing and get Rivatuner to see what your GFX is doing, even if you're not going to OC.

    I'm wondering if having the two monitor setup might be causing the card to run in 2D mode, rather than 3D.

  7. #23
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: new rig - 3dmark 06 results

    that could be a reason having the dual monitor setup. Also make sure your drivers are up to date, is the card getting really hot? if you havent messed around with the fan speed i suggest you do as mine was @ 29&#37; which let the card get to 80C, i turned up to 50% and it never hits 60(60% keeps it near 50 load)>

  8. #24
    Formerly known as Andehh Andeh13's Avatar
    Join Date
    Oct 2005
    Location
    Northampton
    Posts
    3,354
    Thanks
    855
    Thanked
    258 times in 153 posts
    • Andeh13's system
      • Motherboard:
      • Gigabyte GA-P35
      • CPU:
      • Intel Q6600
      • Memory:
      • 4gb Corsair XMS2 800mhz
      • Storage:
      • 1 x 250gb Western Digital AAKS, 2 x 500gb Western Digital AAKS, 1TB WD Caviar Green
      • Graphics card(s):
      • BFG Geforce 8800GTS 512mb
      • PSU:
      • Corsair HX520
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7 64bit
      • Monitor(s):
      • Samsung 24" & Sony 17"
      • Internet:
      • Virgin 10mb... hate them!

    Re: new rig - 3dmark 06 results

    I havnt touched the fan speed & the card never seems overly hot too me. Iv got the most update drivers.

    Thorsson - the thread about my parition problems is over a year old, this is a new( 4 month) old rig.

    Iv downloaded RivaTuner but iv never used it before, any chance of a quick run through of where i get the voltages? thanks

  9. #25
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: new rig - 3dmark 06 results

    RivaTuner doesn't show voltage. You need something like Everest to get that. But it can get the rest.

    In Main choose the top customize arrow and you will see 5 icons. Choose the one on the right that looks like a yellow magnifying glass over a film strip. This brings up the hardware monitoring graphs.

    Choose setup and make sure that Core Clock (ROP & shader), Memory Clock, Core Temp, Fan Duty Cycle & Fan Speed are ticked. You can then leave that running on your "2D" screen while you run a game on the other one and see if anything changes. Also you can report what the values are.

    P.S. If you go into the "Why Tighten Memory Timings" thread there is a link to a good tutorial that I posted.

  10. #26
    Formerly known as Andehh Andeh13's Avatar
    Join Date
    Oct 2005
    Location
    Northampton
    Posts
    3,354
    Thanks
    855
    Thanked
    258 times in 153 posts
    • Andeh13's system
      • Motherboard:
      • Gigabyte GA-P35
      • CPU:
      • Intel Q6600
      • Memory:
      • 4gb Corsair XMS2 800mhz
      • Storage:
      • 1 x 250gb Western Digital AAKS, 2 x 500gb Western Digital AAKS, 1TB WD Caviar Green
      • Graphics card(s):
      • BFG Geforce 8800GTS 512mb
      • PSU:
      • Corsair HX520
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7 64bit
      • Monitor(s):
      • Samsung 24" & Sony 17"
      • Internet:
      • Virgin 10mb... hate them!

    Re: new rig - 3dmark 06 results

    I have opened up rivatuner & the 'customize arrow', is it the one directly under/within the 'target adapter' area. Ie where it says 'If you have more than one display adpater installed, you may select tweak target from the list below.'

    Once iv clicked on the arrow it brings up 3 options, one with says 'use low level refresh rate', 'use low level desktop colour schemes' and then 'graphics subsystem diag reports'.

    Clicking on the last one of the 3 brings up the subsystem dia report, and i see the 5 icons at the bottom, a camera one, 2 magnifying glasses(one over a red book, one over a blue book), then a folder then a floppy disc icon.

    Clicking on either of the magnifying glasses doesnt do anything graphically wise.

    Am i missing something here? cheers

  11. #27
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: new rig - 3dmark 06 results

    As a picture paints a thousand words, I refer you to the site I recommended: RivaTuner 2.0 Guide at .:: Derek’s Blog

    If you look at the section "Configuring Automatic Fan Control" that shows you how to bring up the graphs. From your description though it sounds like you may have an old version. Make sure you have version 2 - I think 2.07 is the latest.

  12. #28
    Formerly known as Andehh Andeh13's Avatar
    Join Date
    Oct 2005
    Location
    Northampton
    Posts
    3,354
    Thanks
    855
    Thanked
    258 times in 153 posts
    • Andeh13's system
      • Motherboard:
      • Gigabyte GA-P35
      • CPU:
      • Intel Q6600
      • Memory:
      • 4gb Corsair XMS2 800mhz
      • Storage:
      • 1 x 250gb Western Digital AAKS, 2 x 500gb Western Digital AAKS, 1TB WD Caviar Green
      • Graphics card(s):
      • BFG Geforce 8800GTS 512mb
      • PSU:
      • Corsair HX520
      • Case:
      • Antec 900
      • Operating System:
      • Windows 7 64bit
      • Monitor(s):
      • Samsung 24" & Sony 17"
      • Internet:
      • Virgin 10mb... hate them!

    Re: new rig - 3dmark 06 results

    Iv tried all the guides, searched for different versions of Rivatuner(using 2.06 atm) & iv gone through all the settings & FAQs yet im still missing a a few of the buttons, this is what im seeing with rivatuner:



    thanks again

  13. #29
    Registered+
    Join Date
    Feb 2008
    Posts
    16
    Thanks
    0
    Thanked
    1 time in 1 post
    • kazicameron's system
      • Motherboard:
      • p5k pro
      • CPU:
      • q6600 3.2 9*359
      • Memory:
      • corsair twinx 6400 4x1gb
      • Storage:
      • 500gb
      • Graphics card(s):
      • 8800gt @ 700 & 950
      • PSU:
      • xilence 600w
      • Case:
      • antec p182
      • Monitor(s):
      • 22" samsung
      • Internet:
      • bredbandsbolaget 24mb

    Re: new rig - 3dmark 06 results

    i had the same problem if its vista 64 then when you download youll get 2 files the rivatuner setup and also a rivatuner.rtd file.

    first uninstall your rivatuner then install again. dont run as you need to put the rtd in the rivatuner folder and run it by clicking on it. If it asks you for a program to associate it to then browse for rivatuner.exe.

    This allows you to use the program fully in vista 64. now you'll see all the options.

    Vista 64 is looking for a signed driver (which rivatuner doesnt have) this is a work around.

  14. Received thanks from:

    Blitzen (29-02-2008)

  15. #30
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: new rig - 3dmark 06 results

    Ah, IIRC it's an 8800GTS 512 issue. Wasn't there a BIOS update?

  16. #31
    Registered User
    Join Date
    Mar 2008
    Posts
    2
    Thanks
    0
    Thanked
    0 times in 0 posts

    new rig - 3dmark 06 results

    Hi i builded a pc together and i would like to know if my 3dmark 2006 score is any good
    Ofcourse games as crysis run at 40-50 fps outside and like 100 inside buildings and i can play any other game at highest settings.
    If anyone can help me out

    score : 10954

    Intel Core 2 Duo e8200 @ 2.66 Ghz ( not overclocked )
    2gb ddr2 800mhz pc6400 G.E.I.L
    Msi G31M2 V-2 mainboard
    Club 3d Nvidia 8800GT 512 mb ( not overclocked )
    480 watt coolermaster power
    Creative X-fi Platinum

  17. #32
    Lover & Fighter Blitzen's Avatar
    Join Date
    Oct 2006
    Location
    Between Your Mum & Sister
    Posts
    6,310
    Thanks
    539
    Thanked
    382 times in 300 posts
    • Blitzen's system
      • Motherboard:
      • ABIT iX38 QuadGT
      • CPU:
      • Intel Quad Q6600 @ 3.6Ghz : 30 Degrees Idle - 41-46 Degrees Load
      • Memory:
      • 4 x 1GB OCZ Platinum PC6400 @ 4-4-4-12
      • Storage:
      • 2 x 500GB Samsung Spinpoints - RAID 0
      • Graphics card(s):
      • GTX 285
      • PSU:
      • Enermax MODU 82+ 625W
      • Case:
      • Antec Nine Hundred
      • Operating System:
      • Windows 7 Ultimate 64Bit
      • Monitor(s):
      • Viewsonic Q22wb 22" Widescreen - 5ms
      • Internet:
      • O2 premium @ 17mb

    Re: new rig - 3dmark 06 results

    Quote Originally Posted by Hicks12 View Post
    i got like 10k with mine, why does quad core put it up so much xD when quadcore is hardly a factor for much atm.

    Nice score.
    Because 3D Mark 06 is very CPU intensive.

    Quote Originally Posted by sandrowich View Post
    Hi i builded a pc together and i would like to know if my 3dmark 2006 score is any good
    Ofcourse games as crysis run at 40-50 fps outside and like 100 inside buildings and i can play any other game at highest settings.
    If anyone can help me out

    score : 10954

    Intel Core 2 Duo e8200 @ 2.66 Ghz ( not overclocked )
    2gb ddr2 800mhz pc6400 G.E.I.L
    Msi G31M2 V-2 mainboard
    Club 3d Nvidia 8800GT 512 mb ( not overclocked )
    480 watt coolermaster power
    Creative X-fi Platinum
    Push your CPU up to 3.0ghz and i bet you break 12K easily.

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Building A Gaming Rig - A Living Document. (A HEXUS Project)
    By Stewart in forum PC Hardware and Components
    Replies: 188
    Last Post: 06-09-2008, 04:19 PM
  2. Overclocking CPU and GFX results
    By Misklin in forum abit.care@HEXUS
    Replies: 0
    Last Post: 03-01-2008, 12:49 AM
  3. Core 2 Duo E6300 3DMark Results
    By james.robinson in forum PC Hardware and Components
    Replies: 14
    Last Post: 30-07-2006, 07:50 PM
  4. ATI Catalyst 5.8 released
    By =TcQi= in forum Graphics Cards
    Replies: 17
    Last Post: 18-08-2005, 12:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •