Results 1 to 6 of 6

Thread: New Machine won't Post

  1. #1
    PST
    PST is offline
    Registered User
    Join Date
    Jun 2008
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Unhappy New Machine won't Post

    New Build PC

    Asus P5K
    E400 intel CPU
    2 GB 6400 ram (compatible according to both the manual and Asus' ram checker)
    Antec Sontana III case (500w power)

    Asus P5K motherboard (1.02 motherboard version so should work with a 45nm processor)
    E8400 CPU
    BFG 9800 GT video card
    Corsair 6400 800mhz ram
    Antec Sontana III case (with 500 PSU)


    When I have everything connected and power on, nothing happens, the cpu fan goes as if it was about to spin but then just stops without doing anything but slight movement.

    If I remove the Ram, same as the above - no Bios Beeps

    If I remove the video card then I get the 1 long, 3 short for a fault with the video.

    Yes the 2x2 is connected as well as the main supply to the board.

    Processor+Ram+Video Card=nothing
    Processor+Video Card=Nothing
    Processor with no ram/video card=beeps for no video, fan spins
    Processor with ram, no video card=beeps for no video, fan spins.

  2. #2
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: New Machine won't Post

    Do you have an old PCI-E video card, even a very old PCI one? It seems that the video card may be causing the problem. Or possibly the mobo's PCIE-16 slot or PCI-E bus.

  3. #3
    PST
    PST is offline
    Registered User
    Join Date
    Jun 2008
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: New Machine won't Post

    Quote Originally Posted by Thorsson View Post
    Do you have an old PCI-E video card, even a very old PCI one? It seems that the video card may be causing the problem. Or possibly the mobo's PCIE-16 slot or PCI-E bus.
    Only AGP, no PCI unfortunately

  4. #4
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: New Machine won't Post

    It might be the PSU I suppose, do you have another one you could try?

    One other possibility. Pushing the video card in is flexing the motherboard and causing a short againt the case. Seems unlikely though. You could try putting it together outside the case on a cardboard box to remove that possibility.

    Otherwise did you get motherboard and video card from the same supplier?

  5. #5
    PST
    PST is offline
    Registered User
    Join Date
    Jun 2008
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: New Machine won't Post

    Quote Originally Posted by Thorsson View Post
    It might be the PSU I suppose, do you have another one you could try?

    One other possibility. Pushing the video card in is flexing the motherboard and causing a short againt the case. Seems unlikely though. You could try putting it together outside the case on a cardboard box to remove that possibility.

    Otherwise did you get motherboard and video card from the same supplier?
    I tried taking it out and putting it on cardboard - same outcome.

    I don't have a more modern PSU unfortunately, not one with a 24 pin connector.

    Everything came from the same supplier.

  6. #6
    No-one's Fanboi Thorsson's Avatar
    Join Date
    Nov 2004
    Location
    Neverneverland
    Posts
    2,750
    Thanks
    47
    Thanked
    93 times in 92 posts
    • Thorsson's system
      • Motherboard:
      • ASUS P8Z77-V PRO
      • CPU:
      • i5 3570k
      • Memory:
      • 2x8Gb Corsair Vengeance PC1866
      • Storage:
      • 256M4 SSD; 2Tb 7200RPM Barracuda; 2Tb Linkstation
      • Graphics card(s):
      • EVGA GTX970 SC
      • PSU:
      • Corsair HX650
      • Case:
      • Antec 300
      • Operating System:
      • Win10 64
      • Monitor(s):
      • Dell 2515H
      • Internet:
      • Fibre Optic 30Mb

    Re: New Machine won't Post

    Ring them up and get an RMA then. I'd return all the main parts (PSU, CPU, RAM, Mobo, Video) just to be sure.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Post Your Network! (56K = Possibly)
    By Howard in forum Networking and Broadband
    Replies: 276
    Last Post: 03-03-2021, 12:59 PM
  2. No post issue
    By DiamondGeezer in forum Help! Quick Relief From Tech Headaches
    Replies: 10
    Last Post: 17-11-2015, 05:09 AM
  3. Vista Retail or OEM
    By Salazaar in forum Software
    Replies: 160
    Last Post: 11-03-2008, 02:56 PM
  4. Abit AN8 Ultra based machine intermittently won't POST/boot
    By 8bit in forum Help! Quick Relief From Tech Headaches
    Replies: 7
    Last Post: 02-03-2006, 10:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •