Price Check on a few H2o things.

[Pita^Norf]

Hi peeps need price check on a few things

1. Innovatek Set 5 Kit for a Pentium platform.

1048 Eheim Pump
Innovatek Clear Reservoir
175mm x 165mm Innovacool radiator
120mm Cooling Fan
InnovaCool Rev 3 Solid Copper Water Block
Pentium 4 Mounting

Please give a price for the kit rather than individual parts.

[Pita^Norf]

2. Condenser / rad - smaller of the two.





The effective cooling dimensions are 120mm x 150mm x 43mm, pipe fittings are 8.5mm ID - just the rad no shroud.

Just to illustrate I'm using one of these on my system with a shroud and a 120mm fan.



These are used mainly in the cooling industry for beer coolers etc and anyone who's owned a vapo will notice it looks similar to the vapo rad.

[Pita^Norf]

3. Bigger rad.





Effective cooling dimensions 225mm x 180mm x 90mm, 8.5mm ID pipe fittings.

All measurements give or take a mm.

So how much these two worth ?

Cheers.

[Korky]

Id say the bigger one should get about £25-30 looks in gd nick and the big heater cores are some of the best watercooling rads u can get.

[SilentDeath]

well the rads wouldnt be worth much for watercooling with... a normal heatercore would be better as theres a *lot* more surface area in them where the water is.
however they would be very good for anyone with phasechange/building there own as with phasechange the coolant is under a *lot* more pressure, and normal soldered fins in heatercores wont hold the pressure but copper pipe would easly... rads like this are apparently hard to find, though i expect someone looking for this kind would also be hard to find...

id say upto £25 each...