Q6600 OC check

[Acksaw]

These settings look OK so far.. testing it for about 6 minutes with 4 cores on Prime95 and it seems nice and stable and around 60C,



400x8, kept the ram at 1066 and 2.2v. Vcore is like 1.26 or something around that IIRC, will look later, running a TRUE120 with Scythe S-Flex 1600RPM

Does this look OK?

[Acksaw]

About 15 minutes in:

[Webby]

Keep it going for 24 hours and then you will know if it is stable Oh and your temps shouldn't get much higher than that now, unless your case temp keeps increasing!