Q6600 OC check

These settings look OK so far.. testing it for about 6 minutes with 4 cores on Prime95 and it seems nice and stable and around 60C,

http://www.acksaw.com/stuff/wc/screenshot_26284.png

400x8, kept the ram at 1066 and 2.2v. Vcore is like 1.26 or something around that IIRC, will look later, running a TRUE120 with Scythe S-Flex 1600RPM

Does this look OK?

About 15 minutes in:

http://www.acksaw.com/stuff/wc/screenshot_1663.png

Keep it going for 24 hours and then you will know if it is stable ;) Oh and your temps shouldn't get much higher than that now, unless your case temp keeps increasing!