-
Celeron 2Ghz Overclock
Hello,
I'm kind of a newbie when it comes to overclocking. Yesterday I overclocked my Celeron 2Ghz, residing on an ASUS P4S333 with 256MB DDR333 RAM, up to 2.8Ghz with the following settings:
FSB: 140
Multiplier: 20
Voltage: 1.6
CPU/Memory Ratio: 4:5
The system was stable. Any higher FSB setting was making my system unstable. I was wondering if I could still higher the voltage without frying my processor :p .
thanks!!
-
i had 1 that reached 3.1 in a shuttle, stock volts :O
was using corsair however, and you coulda fried a horse on th ICE in seconds
-
You could maybe up the volts a bit if your temperatures are still reasonable, but don't go above 1.7V for long term use. You might want to set the CPU:RAM to 1:1, at 140MHz FSB with 4:5 ratio the RAM is running at 175 which is above its rated speed.
Rich :¬)