Hi guys, I may or may not have a problem.
The front audio jacks on my Antec 300 case are causing a bit of a problem. When both a microphone and headphone jack are in together, they keep being recognised and then not again, almost as if there is enough power to keep one of them working. I have all the other buttons connected to the mobo and the audio can be HDA or R'97. I went for HDA, could this be my problem or is it somehting totally different you think?
Regards/ Richie
-- MY 2008 RIG --
CASE: Antec 300/ MOBO: ASUS P5Q Pro/ CPU: Q6600/ RAM: Corsair 4GB XMS2/
COOLING: Xigmatek Heatsink 120mm, 2x Xigmatek 120mm w/ Fan controller/
GFX: Sapphire HD4850/ PSU: Corsair HX520/ HD: WD 640GB w/ VibeFixer
DISPLAY1: 22" Neovo 3ms/ DISPLAY2: 32" HDTV/
-- MY 2011 RIG --
CASE: BitFenix Survivor/ MOBO: ASUS P8Z68V Pro/ CPU: i7 2600K @ 4.4Ghz/ RAM: Corsair 16GB Vengenge DDR3 1600MHz/
COOLING: Antek Kuhler H20 with Push-Pull Fans EXPANSION: Black Magic Intensity HDMI 1080p Capture Card
GFX: Sapphire HD6950 *unlocked to 6970*/ PSU: XFX 650w Modular/ HD: 60GB OCZ Agility 3 Sandforce SSD w/ 1TB Sata 3 Storage & 640GB Sata2 Backup
DISPLAY1: 23" 3D 1080p 120Hz LG / DISPLAY2: 22" 1080p LG/
Check out my Youtube Page for Funny Video series I make (17,000 Subscribers)
You need to look at your mobo as the pin outs on the audio header have different functions depending on which audio system is in use - however simplest solution is to try the other system (ACR '97) and see!
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
There are currently 1 users browsing this thread. (0 members and 1 guests)
SCAN.care@HEXUS
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote