First Build: couple questions
Hey Guys,
I received my case and components this afternoon, and I'm just checking on a couple of things.
1,
I have an Antec P180, case and I know I have to put the mobo (pk5 premium) on raisers, but when looking at the case it looks like the raisers are already there. 9 in total.
So i'm just checking, because I have only 3 brass raises that have come with the case. Which look like spares,
2,
Also on looking at my cpu (dual core 8400) in a box, it has a heat sink with it, now I read that when the heat sink is supplied with the cpu it's a cheap make.so is it better to buy another. Is this the case.
I hope all this makes sense,
:confused:
thanks in advance
lexus2
Re: First Build: couple questions
Aftermarket coolers will definately give much better cooling than the stock heatsink.
If you are planning on overclocking at all, or just want a cool build, a decent aftermarket heatsink is a must :) .
Re: First Build: couple questions
1)The risers are already in there you are correct.
2) The stock cooler is fine for stock settings.. it's as simple as that. They can be noisey, they can let the chip run up to it's maximum heat etc.. Most people doing builds choose some sort of aftermarket solution for either better cooling, noise or both :)
Re: First Build: couple questions
Many thanks for a quick reply will continue this exciting build tomorrow.
Re: First Build: couple questions
The stock one is apparently one of the quietest:
http://www.frostytech.com/top5heatsinks.cfm
Re: First Build: couple questions
Hi Again,
Ok I've installed the hdd, gpu, cpu & heatsink. all was going well until I tried to install the dvd drive, on looking at the bay It looked a little tight but anyway I fixed the guide rails onto the dvd drive and tried to ease the drive into the bay.
Unless I'm doing something really wrong by fixing the guide rails to the side of the dvd drive, it just won't go in. Tried it with-out the guide rails but this doesn't look right. I did take out the front plates prior to attempting to put the dvd drive in the case.
So guys have you any ideas as to what I'm doing wrong.
Thanks again in advance
lexus2
Re: First Build: couple questions
Hey Guys,
Just thought I'd let you know I have sorted my pc and booted up with a single beep, so I'm really happy.
Lexus2::)
Re: First Build: couple questions
Re: First Build: couple questions
Ooooh, cool. Enjoy :D
That feeling was great after my first build too :)
Re: First Build: couple questions
Cheers guys and a merry christmas too you all:)
Re: First Build: couple questions
Just gonna take your PC and run.. is that it!?
Charming.
Re: First Build: couple questions
I think I have too much to learn off you guys to leave now. I hope to tap into the source of knowledge that all you guys have acquired.
Thanks again
lexus2 "the happy one"