Temp check

[mr47]

Hey guys..

Below are my system temp's. My system specs are there on the left.
I recently bought an CM aerogate 3

1st sensor is right above a GPU memory.
2nd sensor is sticked onto the RAM HS right above the memory chips.
3rd sensor is sticked onto the Mobo PCB close to the PWM, Choke(s) and cpu.
All of the following are load temp's

Sensor1 (GPU memory) - ~65*C
Sensor2 (RAM) - 38*C
Sensor3 (PWM) - 48*C

CPU (Core0/Core1) - 51*C/44*C
GPU Core - 57*C


Are these temps good/decent/avg/bad? and what would the safe limits for each of them?

TIA
47

[Will404]

I would say avg. Well within safe limits (ish) cpu is about 65'C limit, not sure for GPU, but ur fine.

[GoNz0]

its hot in there, whats the ventilation like ? it can take 7 fans from the specs page and you have 3 ?

need more fans !

[mr47]

I would say avg. Well within safe limits (ish) cpu is about 65'C limit, not sure for GPU, but ur fine.

Hmm..

Max CPU load temp is ~53*C@1hour OCCT // 379*9.5@1.3v (1.28 actual)
Ram and PWM temp's also seem to be fine from what I've ready.

GPU max temp 57*C*@Furmark 15mins.. w/ the stock cooler temp's where reaching ~80
and since these days GPU's can run fine uptil ~90-100*C, i'm guess 63*C Gpu memory temp is also fine.

its hot in there, whats the ventilation like ? it can take 7 fans from the specs page and you have 3 ?
need more fans !

Its not that hot at this time of the year. 11*C/28*C (min/max)

..I do have 6-7 120mm fan's with me, but they make so much noise.
I have my rig in my bedroom and I don't turn it off so I'm just running 2 fans atm .

Right now there's one 120mm at the back for exhaust and one in front of the HDD bay to suck in air.
Both have 69CFM @ 2000rpm, running at 1200rpm.

oh! I have a fantastic 90CFM fan running silently on my sunbeam cooler. check it out - Sunbeamtech CCF