Results 1 to 8 of 8

Thread: Adaptor card advice...

  1. #1
    Senior Member
    Join Date
    Mar 2008
    Location
    Bridgwater, Somerset
    Posts
    250
    Thanks
    10
    Thanked
    4 times in 4 posts
    • phill8800GT's system
      • Motherboard:
      • EVGA Classified 759 - EVGA Classified 762
      • CPU:
      • i7 920 @ 4.4Ghz - i7 920 @ 4.6Ghz
      • Memory:
      • 6Gb G Skill Trident 2000Mhz - 6Gb G Skill Perfect Storm 2133Mhz
      • Storage:
      • SanDisk Extreme SSD's and Raptors and 2Tb Drives for storage
      • Graphics card(s):
      • 3 x GTX 580 3Gb
      • PSU:
      • Corsair AX1200 - Corsair AX1200
      • Case:
      • 2 x Custom Made Danger Den DD 21 Towers
      • Operating System:
      • Windows 7 Ultimate
      • Monitor(s):
      • 2 x 30" Dell 3011WFP
      • Internet:
      • 38Mb Down and 6Mb Up Plus.net Fibre

    Adaptor card advice...

    Hi guys,

    I'm looking for an adaptor card and I think I have found one that would be the best I could go for, for what I'm going to be getting to use with it.
    But before I go nuts, could someone give me any advice or a different product suggestion to go for?

    I'm currently looking at this adaptor card: http://www.scan.co.uk/Products/Adapt...AID-controller

    I've seen it cheaper else where (but I was wondering since I'd be ordering some SSD's to go with it, these in particular - http://www.scan.co.uk/Products/30GB-...-s-Write-speed and possibly upto 8 in total - in time, not all at once!!) I was wondering is it a good buy for the card for future proofing or could I get away with something cheaper or not as good?

    I've been reading up that 4 or more SSD's (the same models) on the 2405 card tends to overheat and doesnt do a great deal in performance, which led me to the 5805...

    Thoughts, suggestions would be most welcome

  2. #2
    Registered+
    Join Date
    Jul 2008
    Location
    London
    Posts
    55
    Thanks
    1
    Thanked
    2 times in 2 posts
    • ma10's system
      • Motherboard:
      • ASUS P5W64 WS Pro
      • CPU:
      • Q6600
      • Memory:
      • 4gb Corsair TwinX XMS2
      • Storage:
      • Adaptec 5405+ICP5165 RAID5
      • Graphics card(s):
      • ATI 3850HD
      • PSU:
      • Corsair HX620W
      • Case:
      • Rebel9 + Sata Hot-Swap Cages
      • Operating System:
      • XP/Ubuntu 64bit
      • Monitor(s):
      • Hyundai ImageQuest Q17
      • Internet:
      • 24mb ADSL2

    Re: Adaptor card advice...

    Well... if you're going nuts on RAID adapters then have you considered any ARECA based adapters as they are usually the most recommended for a RAID controller...

    otherwise, the 5805 is one of Adaptecs high end products and most reviews that I've seen have generally been very good so not a bad choice at all really.

    I've had a 5405 for about a year now running 4 1TB Samsung F1 drives and had no problems with it at all.

  3. #3
    Senior Member
    Join Date
    Mar 2008
    Location
    Bridgwater, Somerset
    Posts
    250
    Thanks
    10
    Thanked
    4 times in 4 posts
    • phill8800GT's system
      • Motherboard:
      • EVGA Classified 759 - EVGA Classified 762
      • CPU:
      • i7 920 @ 4.4Ghz - i7 920 @ 4.6Ghz
      • Memory:
      • 6Gb G Skill Trident 2000Mhz - 6Gb G Skill Perfect Storm 2133Mhz
      • Storage:
      • SanDisk Extreme SSD's and Raptors and 2Tb Drives for storage
      • Graphics card(s):
      • 3 x GTX 580 3Gb
      • PSU:
      • Corsair AX1200 - Corsair AX1200
      • Case:
      • 2 x Custom Made Danger Den DD 21 Towers
      • Operating System:
      • Windows 7 Ultimate
      • Monitor(s):
      • 2 x 30" Dell 3011WFP
      • Internet:
      • 38Mb Down and 6Mb Up Plus.net Fibre

    Re: Adaptor card advice...

    Well I've had a read of a review that had the 5805 up against a ARECA card that was nearly double the price and the 5805 beat it. I know they are a very good card but I'm wondering if there was something better around the price range...

    If there's not, then I guess I'll just have to get my SCSI and SAS hardware and drives sold and then I'll be making a jump into the 5805 and upto 4 SSD's to start with

  4. #4
    Registered+
    Join Date
    Jul 2008
    Location
    London
    Posts
    55
    Thanks
    1
    Thanked
    2 times in 2 posts
    • ma10's system
      • Motherboard:
      • ASUS P5W64 WS Pro
      • CPU:
      • Q6600
      • Memory:
      • 4gb Corsair TwinX XMS2
      • Storage:
      • Adaptec 5405+ICP5165 RAID5
      • Graphics card(s):
      • ATI 3850HD
      • PSU:
      • Corsair HX620W
      • Case:
      • Rebel9 + Sata Hot-Swap Cages
      • Operating System:
      • XP/Ubuntu 64bit
      • Monitor(s):
      • Hyundai ImageQuest Q17
      • Internet:
      • 24mb ADSL2

    Re: Adaptor card advice...

    I was very lucky when I picked up my 5405 last year as it was a clearance item and I bagged it new for 120 squids. Very Very happy with it!!

    if I could afford it, I would go for the 5805!!




    I'm not heading into SSD territory anytime soon but maybe you should look for SLC type SSDs rather than MLC if you're looking for the most performance and longevity.

    Probably someone else care to comment more on SSDs?

  5. #5
    Senior Member
    Join Date
    Mar 2008
    Location
    Bridgwater, Somerset
    Posts
    250
    Thanks
    10
    Thanked
    4 times in 4 posts
    • phill8800GT's system
      • Motherboard:
      • EVGA Classified 759 - EVGA Classified 762
      • CPU:
      • i7 920 @ 4.4Ghz - i7 920 @ 4.6Ghz
      • Memory:
      • 6Gb G Skill Trident 2000Mhz - 6Gb G Skill Perfect Storm 2133Mhz
      • Storage:
      • SanDisk Extreme SSD's and Raptors and 2Tb Drives for storage
      • Graphics card(s):
      • 3 x GTX 580 3Gb
      • PSU:
      • Corsair AX1200 - Corsair AX1200
      • Case:
      • 2 x Custom Made Danger Den DD 21 Towers
      • Operating System:
      • Windows 7 Ultimate
      • Monitor(s):
      • 2 x 30" Dell 3011WFP
      • Internet:
      • 38Mb Down and 6Mb Up Plus.net Fibre

    Re: Adaptor card advice...

    I dont worry to much about what things cost because if I buy something thats not quite what I want, then I'll have to buy again which will cost me even more in the long term! So I just go with what I should buy rather than what my wallet can handle!

    Judging by the SSD reviews I have read of the drives I've mentioned, they do seem the better type for the price. I know that £110 for 30Gb is high but with the performance of 4 of these things in Raid 0 I'd say its worth it

    I'm a gamer and bencher so I think it'll be worth the money for me, but I do know its a little OTT for my needs, but we'll see

  6. #6
    Registered+
    Join Date
    Jul 2008
    Location
    London
    Posts
    55
    Thanks
    1
    Thanked
    2 times in 2 posts
    • ma10's system
      • Motherboard:
      • ASUS P5W64 WS Pro
      • CPU:
      • Q6600
      • Memory:
      • 4gb Corsair TwinX XMS2
      • Storage:
      • Adaptec 5405+ICP5165 RAID5
      • Graphics card(s):
      • ATI 3850HD
      • PSU:
      • Corsair HX620W
      • Case:
      • Rebel9 + Sata Hot-Swap Cages
      • Operating System:
      • XP/Ubuntu 64bit
      • Monitor(s):
      • Hyundai ImageQuest Q17
      • Internet:
      • 24mb ADSL2

    Re: Adaptor card advice...

    well, if that's how you operate then fair enough i suppose!

    I got the RAID adapters for my storage server so my needs are rather different. I recently picked up a 2nd hand 16 port Adaptec ICP5165 (former revision of the 5805) and using that and the 5405 in the same system for current/future storage.

    As for those OCZ vertex MLC SSDs, they look quite good for the price... esp considering SLC equivalents are 3-4 times the price!!

  7. #7
    I'm ITX
    Join Date
    Jun 2008
    Location
    Liverpool
    Posts
    2,415
    Thanks
    82
    Thanked
    159 times in 148 posts

    Re: Adaptor card advice...

    Novatech had/have cheap SLC drives from samsaung for like £70 iirc...

    It's 4.98*

  8. #8
    Senior Member
    Join Date
    Mar 2008
    Location
    Bridgwater, Somerset
    Posts
    250
    Thanks
    10
    Thanked
    4 times in 4 posts
    • phill8800GT's system
      • Motherboard:
      • EVGA Classified 759 - EVGA Classified 762
      • CPU:
      • i7 920 @ 4.4Ghz - i7 920 @ 4.6Ghz
      • Memory:
      • 6Gb G Skill Trident 2000Mhz - 6Gb G Skill Perfect Storm 2133Mhz
      • Storage:
      • SanDisk Extreme SSD's and Raptors and 2Tb Drives for storage
      • Graphics card(s):
      • 3 x GTX 580 3Gb
      • PSU:
      • Corsair AX1200 - Corsair AX1200
      • Case:
      • 2 x Custom Made Danger Den DD 21 Towers
      • Operating System:
      • Windows 7 Ultimate
      • Monitor(s):
      • 2 x 30" Dell 3011WFP
      • Internet:
      • 38Mb Down and 6Mb Up Plus.net Fibre

    Re: Adaptor card advice...

    Well I've found that if I only spend small amounts I end up having to pay out even more in the long term because its not what I really wanted!!

    So I figure do it this way and it should save me a bit of cash

    I'm going to hold out buying any drives at the moment since there is a release of newer models coming out which should hopefully lower the prices down for me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New build advice
    By Hanzo in forum PC Hardware and Components
    Replies: 9
    Last Post: 15-09-2008, 01:01 PM
  2. Hmmmm, much advice needed...
    By vrykyl in forum Automotive
    Replies: 20
    Last Post: 29-02-2008, 11:18 PM
  3. Need Advice on Building a New PC
    By Andaho in forum PC Hardware and Components
    Replies: 53
    Last Post: 27-07-2007, 09:12 AM
  4. Advice needed on a high end custom system build
    By sophosuni in forum Chassis and Mods
    Replies: 18
    Last Post: 12-01-2007, 05:26 AM
  5. Advice, advice, advice - please! =]
    By ytrebil in forum PC Hardware and Components
    Replies: 0
    Last Post: 01-06-2005, 03:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •