Page 1 of 3 123 LastLast
Results 1 to 16 of 37

Thread: E8400 or E2160 or Q6600?

  1. #1
    Senior Member JPreston's Avatar
    Join Date
    Nov 2005
    Posts
    1,667
    Thanks
    5
    Thanked
    124 times in 74 posts

    E8400 or E2160 or Q6600?

    I have an E8400 on back order with Scan, but they don't seem to want to send me one even when they have them in.

    I'm split between buying an E8400 from somewhere else, or saving ~£90 by buying an E2160 and OC'ing it, or spending ~£20 extra and getting a Q6600 instead. Which pretty much spans Intel's range

    The PC will be used for games, some movie encoding, as well as normal browsing and office stuff.

    If you were building a S775 PC this week, what would you go for? Money isn't really tight but if I save ~£90 with an E2160 I can chuck it towards a GPU when I next upgrade that. I just want decent performance at a fair price

    I'm a little hesitant to get a Q6600 as I think it might get borderline with my 460W Akasa PSU....though not sure how hot/power hungry an E2160 would get when OC'ed.
    Quote Originally Posted by Bertrand Russell

    The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.

  2. #2
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: E8400 or E2160 or Q6600?

    Most Pentium dual cores get to about 2.8GHz on stock volts, so probably won't use too much power, certainly not enough to cause problems.

    If I were doing a build right now I would get the Q6600 if I could afford it. That will last bloomin ages and save you upgrading later.

    If you are a frequent upgrader then get the pentium dual core, if you plan on it lasting a long long time get the q6600.

  3. #3
    Senior Member JPreston's Avatar
    Join Date
    Nov 2005
    Posts
    1,667
    Thanks
    5
    Thanked
    124 times in 74 posts

    Re: E8400 or E2160 or Q6600?

    Hhhhhmmm well since you mention it I could do with it lasting a long time, I tend not to upgrade my CPU/board all that frequently.

    Will a Q6600 really last me a long time (say 2 years or more)? Won't the nehalem CPUs completely blow it away - they'll need a new board I think? Or, again thinking about nehalem, will S775 chips get much better than what is currently available or will they be finished later this year?

    If S755 is expected to have a decent life yet then the E2160 with plans to upgrade in 12 - 18 months to something much better than a E8400/Q6600 could be a good idea. OTOH if S775 has pretty much peaked with the current ranges then I may as well get a Q6600 now, and this will be another one-shot disposable CPU/board upgrade, just like my last switch to S939 (damn you, AMD!!).
    Quote Originally Posted by Bertrand Russell

    The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.

  4. #4
    Banned
    Join Date
    Feb 2008
    Location
    Carlisle
    Posts
    4,121
    Thanks
    504
    Thanked
    368 times in 278 posts
    • matty-hodgson's system
      • Motherboard:
      • Abit IP35 Dark Raider
      • CPU:
      • Q6600 @ 4GHz (59'C Under a TRUE Black)
      • Memory:
      • 4GB OCZ DDR2 890MHz (5-4-4-15)
      • Storage:
      • Intel 80GB - Games. Intel 80GB - OS. 1TB Samsung - Storage.
      • Graphics card(s):
      • NVIDIA Zotac GTX 275: 728 Core, 1614 Shader, 1340 Memory
      • PSU:
      • Enermax MODU82+ 625w
      • Case:
      • Antec 300
      • Operating System:
      • Windows 7 x64
      • Monitor(s):
      • Samsung SM2343BW (2048x1152)
      • Internet:
      • Smallworld 4Mbps

    Re: E8400 or E2160 or Q6600?

    i'd go for the Q6600 if you want it to run and load games easily, without even breaking a sweat.

    runs pretty cool at stock aswell with a decent heatsink and fan, around 35'C when it's warm outside..

    if you get it on a cool day you get around 20'C on stock with a decent cooler and fan, like only a £15 1, not a huge quarter tonne heatsink.

  5. #5
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: E8400 or E2160 or Q6600?

    If you are capable of ignoring the fact that the new cpu's will wipe the floor with yours then it will last a long long time.

    In terms of actually struggling to perform I just don't see it having a problem for a good while yet. I build my pc's to either sell within 6 months to 18 months (to keep up with the times) or last me a long time and I'd be comfortable getting the Q6600.

  6. #6
    Lover & Fighter Blitzen's Avatar
    Join Date
    Oct 2006
    Location
    Between Your Mum & Sister
    Posts
    6,310
    Thanks
    539
    Thanked
    382 times in 300 posts
    • Blitzen's system
      • Motherboard:
      • ABIT iX38 QuadGT
      • CPU:
      • Intel Quad Q6600 @ 3.6Ghz : 30 Degrees Idle - 41-46 Degrees Load
      • Memory:
      • 4 x 1GB OCZ Platinum PC6400 @ 4-4-4-12
      • Storage:
      • 2 x 500GB Samsung Spinpoints - RAID 0
      • Graphics card(s):
      • GTX 285
      • PSU:
      • Enermax MODU 82+ 625W
      • Case:
      • Antec Nine Hundred
      • Operating System:
      • Windows 7 Ultimate 64Bit
      • Monitor(s):
      • Viewsonic Q22wb 22" Widescreen - 5ms
      • Internet:
      • O2 premium @ 17mb

    Re: E8400 or E2160 or Q6600?

    Quote Originally Posted by JPreston View Post
    I have an E8400 on back order with Scan, but they don't seem to want to send me one even when they have them in.

    I'm split between buying an E8400 from somewhere else, or saving ~£90 by buying an E2160 and OC'ing it, or spending ~£20 extra and getting a Q6600 instead. Which pretty much spans Intel's range

    The PC will be used for games, some movie encoding, as well as normal browsing and office stuff.

    If you were building a S775 PC this week, what would you go for? Money isn't really tight but if I save ~£90 with an E2160 I can chuck it towards a GPU when I next upgrade that. I just want decent performance at a fair price

    I'm a little hesitant to get a Q6600 as I think it might get borderline with my 460W Akasa PSU....though not sure how hot/power hungry an E2160 would get when OC'ed.
    I have just been wrestling with this and in the end i went for the Q6600.
    Pros vs the wolfdale:
    - It will outlive the E8400 by some way i think.
    - Its only £20 more
    - More and more things will go the way of Quad in the coming months
    - Its reliable unlike the wolfdales.
    - Stupidly priced for a core that is barely better than an E6600

    Cons:
    -The ONLY one i can think of is the overclock potential but 3.8 vs 4.0ghz....is that really worth worry over?

    I am glad i came to the decision i did.

  7. #7
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: E8400 or E2160 or Q6600?

    With a good motherboard and RAM the E8400 would probably hit more like 4.5GHz from what I hear but the typical overclock will be as blitzen says as you need to get the RAM over 900MHz to get it further than 4.0GHz.

    With the Q6600, as long as you don't expect more than 3.4GHz you can only be pleasently suprised if and when it hits 3.6 - 3.8GHz.

  8. #8
    Lover & Fighter Blitzen's Avatar
    Join Date
    Oct 2006
    Location
    Between Your Mum & Sister
    Posts
    6,310
    Thanks
    539
    Thanked
    382 times in 300 posts
    • Blitzen's system
      • Motherboard:
      • ABIT iX38 QuadGT
      • CPU:
      • Intel Quad Q6600 @ 3.6Ghz : 30 Degrees Idle - 41-46 Degrees Load
      • Memory:
      • 4 x 1GB OCZ Platinum PC6400 @ 4-4-4-12
      • Storage:
      • 2 x 500GB Samsung Spinpoints - RAID 0
      • Graphics card(s):
      • GTX 285
      • PSU:
      • Enermax MODU 82+ 625W
      • Case:
      • Antec Nine Hundred
      • Operating System:
      • Windows 7 Ultimate 64Bit
      • Monitor(s):
      • Viewsonic Q22wb 22" Widescreen - 5ms
      • Internet:
      • O2 premium @ 17mb

    Re: E8400 or E2160 or Q6600?

    Quote Originally Posted by staffsMike View Post
    With a good motherboard and RAM the E8400 would probably hit more like 4.5GHz from what I hear but the typical overclock will be as blitzen says as you need to get the RAM over 900MHz to get it further than 4.0GHz.

    With the Q6600, as long as you don't expect more than 3.4GHz you can only be pleasently suprised if and when it hits 3.6 - 3.8GHz.
    I have just been looking at some benchmarks for these.
    It read.

    E8400 @ 4.2ghz
    Q6600 @ 3.6ghz

    Only 0.3% difference in fps in game(flip flopping winners btw).

    The Q6600 seems to be the best buy thats all. Its no slower in real use than the E8400 and will have a longer life being quad rather than dual.

  9. #9
    finding nemo staffsMike's Avatar
    Join Date
    Jan 2007
    Posts
    11,498
    Thanks
    197
    Thanked
    794 times in 741 posts
    • staffsMike's system
      • Motherboard:
      • evga 680i
      • CPU:
      • e6600
      • Memory:
      • geil ultra pc6400
      • Storage:
      • WD 320gb
      • Graphics card(s):
      • leadtek 8800 GTS 640mb
      • PSU:
      • ocz gameXstream 700w
      • Case:
      • akasa eclipse
      • Monitor(s):
      • dell 2007wfp and Lg L194WT
      • Internet:
      • pipex homecall

    Re: E8400 or E2160 or Q6600?

    I'm don't disagree with you on what. Q6600 is certainly the way to go if you are spending this sort of money.

    For gaming as long as you're at 2.4GHz (dual or quad) or more I don't see there being that much difference in a lot of games. Some games are very CPU intensive but still the differences will be minor as it's mainly down to GPU power.

    Getting an E8400 over 4.5GHz is expensive, especially if you want 4GB of RAM and you need a decent motherboard to run it all where the Q6600 will clock well on most of the mid range boards

  10. #10
    Getting old...
    Join Date
    Aug 2007
    Location
    You Want To Ask That?
    Posts
    2,568
    Thanks
    188
    Thanked
    93 times in 89 posts
    • UseItNow's system
      • Motherboard:
      • It's holding everything together!
      • CPU:
      • It's in my PC
      • Memory:
      • It's remembering, alright?
      • Storage:
      • It's a hard drive, what more do you want?
      • Graphics card(s):
      • Cr*p, there I said it!
      • PSU:
      • It's old and juicy!
      • Case:
      • Bog standard!
      • Operating System:
      • You Got To Ask? I'm here at Hexus because of it!
      • Monitor(s):
      • Big Enough, Yay For Me!
      • Internet:
      • Hell if I know, care anymore?

    Re: E8400 or E2160 or Q6600?

    Pardon me if I put a spanner in the works.

    If you are interested in upgrading later this year, why not save the money and buy the E2160, I'm presuming you probably have the motherboard already? If not, why not just buy a cheaper motherboard, such as those with the 610i, 630i, P31 or G31 chipsets and stick in your current graphics card. You seemed to indicate that you had one as you would be looking to upgrade the graphics later on. This way, you save a few quid which can be used on your upgrades, presumably on the Nehalem CPU and Socket-1366 motherboard to go with it?

    Some possibilities on the motherboards:
    Gigabyte GA-73VM-S2, NF610i Chipset
    Computer hardware and software at amazing prices, available online from Scan Computers UK
    Gigabyte GA-73PVM-S2H, NF630i Chipset
    Computer hardware and software at amazing prices, available online from Scan Computers UK
    Abit I-N73HD, NF630i Chipset
    Computer hardware and software at amazing prices, available online from Scan Computers UK
    Gigabyte GA-P31-S3G, iP31 Express Chipset
    Computer hardware and software at amazing prices, available online from Scan Computers UK

    Anyway, good luck on your build!

  11. #11
    Pedandic mo-fo IAmATeaf's Avatar
    Join Date
    Jul 2006
    Location
    South of the Watford Gap!
    Posts
    963
    Thanks
    2
    Thanked
    22 times in 22 posts
    • IAmATeaf's system
      • Motherboard:
      • Asus P5Q Deluxe
      • CPU:
      • Q6600@3.25
      • Memory:
      • 4 x 2GB Corsair 6400C5DHX XMS2
      • Storage:
      • 2 x 0.5TB 7200.12, 2 x 1.5TB 7200.11
      • Graphics card(s):
      • Gigabyte GTX460 OC
      • PSU:
      • Corsair HX520
      • Case:
      • Lian Li PC6089B
      • Operating System:
      • Windows 7 Pro x64
      • Monitor(s):
      • Samsung T240 24"
      • Internet:
      • 6Mb ADSL Max

    Re: E8400 or E2160 or Q6600?

    The words video encoding should sway the decision towards a Q6600. I have mine overclocked to 3.0GHz at stock voltages.

    Not too sure about the temps quoted by matty-hodgson as those are insanely low temps which you'd probably not even get with a decent water cooling kit, my Q6600 tops out at around 63,63,60,60 but have since replaced my rear stock adda 80mm fan with a yate loon and that's helped bring the temps down to around 59.

  12. #12
    Senior Member
    Join Date
    Aug 2003
    Posts
    6,585
    Thanks
    0
    Thanked
    246 times in 208 posts

    Re: E8400 or E2160 or Q6600?

    I am afraid this will likely be a one-shot upgrade unless they somehow manage to mess up the Nehalem. That said, it's worth pointing out that the Nehalem will probably take another 18 months to be affordable anyway considering that it will take a time for RAM makers to shift production of DDR3 at full speed. Between dual and quad, well, it pretty much depends on what you do. For games, it doesn't matter too much between dual/quad. Games aren't optimised for quad, but they aren't held back by it either. But for video encoding, quad beats the advantage of SSE 4.1 from my impression.

  13. #13
    Senior Member JPreston's Avatar
    Join Date
    Nov 2005
    Posts
    1,667
    Thanks
    5
    Thanked
    124 times in 74 posts

    Re: E8400 or E2160 or Q6600?

    Q6600 seems to have it so far

    Quote Originally Posted by UseItNow View Post
    Pardon me if I put a spanner in the works.

    If you are interested in upgrading later this year, why not save the money and buy the E2160, I'm presuming you probably have the motherboard already?
    Spanners always welcome

    No I'll be buying the motherboard along with the chip (Abit IP35 Dark Raider). As far as RAM goes, it's 4Gb of bog standard ~£65 stuff that I'm getting, so I'll end up RAM limited before I manage to get crazy clock speeds of 4.5Gig+ with a dual core processor. Which makes 3.0 - 3.4 Gig of Q6600 sounds very appealing. I'll be using an Ultima 90 cooler which should allow for reasonable speeds on the Q6600.

    I'm not interested in upgrading kater this year per se.....but if I can spend £50 on a processor now and £100 - £150 in a little over year on a chip that will blow a Q6600 away and last me well into nehalem, then that would be a option. But there's a good chance that such a S775 uber-chip will never materialise and everything switches overnight to the new socket like it did with S939.

    I guess I'll go for the Q6600.....can always upgrade that in future if it's needed, and worthwhile to do so (which from what you folk are saying, will be unlikely)....and it should last me a long way into nehalem until I get the urge to buy a new CPU, motherboard, PSU and RAM all over again. I thought these PC things were meant to be upgradeable, all I seem to keep from one to the next is the power cable
    Quote Originally Posted by Bertrand Russell

    The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.

  14. #14
    Shisha King
    Join Date
    Feb 2008
    Location
    London, England
    Posts
    500
    Thanks
    28
    Thanked
    11 times in 7 posts
    • shaffaaf27's system
      • Motherboard:
      • DFI P45-T2RS
      • CPU:
      • Intel Q6600 Oced to 3.4GHz
      • Memory:
      • 2x2GB Geil Black Dragon 1066MHz 2.1V C5 @ 1200MHz C5 2.2Vs
      • Storage:
      • Samsung 1TB F3
      • Graphics card(s):
      • Crossfire Sapphire 4870 512MB x2
      • PSU:
      • North-Q Black Magic 850W
      • Case:
      • Silverstone SG03B-F
      • Operating System:
      • Vista 64bit Ultimate
      • Monitor(s):
      • DGM 24", Dell 24" 16:9
      • Internet:
      • 20Mb

    Re: E8400 or E2160 or Q6600?

    well you could get a 780i mobo, which allows for unlinked memory FBS dividers, so you can up the CPU as much as possible, w.o. effecting the RAM.

  15. #15
    That spy is a spy!
    Join Date
    Feb 2008
    Location
    Rochdale
    Posts
    282
    Thanks
    69
    Thanked
    5 times in 5 posts
    • AndrewJ's system
      • Motherboard:
      • Abit Ip35 Pro
      • CPU:
      • Intel Q6600 @ 3.6GHZ ( Scythe Mini Ninja)
      • Memory:
      • 4GB Corsair XMS2 800mhz
      • Storage:
      • 250GB WD SATA 2
      • Graphics card(s):
      • XFX 8800GTS Alpha Dog XXX 512MB
      • PSU:
      • Corsair HX620
      • Case:
      • Antec 1200
      • Operating System:
      • Vista X64 Ultimate SP1
      • Monitor(s):
      • SAMSUNG 204BW
      • Internet:
      • VIRGIN MEDIA 20MB CABLE, THROUGH NETGEAR G ROUTER

    Re: E8400 or E2160 or Q6600?

    Q6600 given the issues I have heard with the E8400, I plan on the Q6600 for my next build in 3week

    Can't wait!!!!

  16. #16
    Senior Member
    Join Date
    Aug 2003
    Posts
    6,585
    Thanks
    0
    Thanked
    246 times in 208 posts

    Re: E8400 or E2160 or Q6600?

    Quote Originally Posted by JPreston View Post
    I thought these PC things were meant to be upgradeable, all I seem to keep from one to the next is the power cable
    Haha, I know what you mean. I also went 939 knowing full well that the next upgrade would require a new motherboard. It made sense though - DDR2 was still too expensive at the time, and at least I was able to carry the DDR RAM and case from the build before that to that build.

    I told myself that I would skip Quad-core altogether and go Oct-core, expecting a less one sided core war from AMD and Intel, and that someone would come up with a way to optimise applications for as many cores as available (unlike right now where games are still scale poorly to 4 cores).

    The TRUE cooler better works on Nehalem though (without having to pay more than a few quid for new mounting mechanism), or I'd be rather annoyed. I expect pretty much everything else other than the case, cooler, fans to be replaced for the build that follows the 775 platform.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Q6600 vs E8400 for gaming
    By rob4001 in forum PC Hardware and Components
    Replies: 38
    Last Post: 04-11-2008, 09:58 AM
  2. IP35 and E2160
    By MrP in forum abit.care@HEXUS
    Replies: 5
    Last Post: 08-01-2008, 06:02 PM
  3. Would my existing PSU/RAM be fine for Q6600 Upgrade
    By jonathan_phang in forum PC Hardware and Components
    Replies: 8
    Last Post: 02-11-2007, 10:37 PM
  4. E6850 or Q6600?
    By vegettoxp in forum PC Hardware and Components
    Replies: 19
    Last Post: 20-07-2007, 12:12 PM
  5. £48.48 Intel E2160 (with googlecheckout)
    By Bizarre in forum Retail Therapy and Bargains
    Replies: 26
    Last Post: 13-05-2007, 05:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •