LinkBack URL
About LinkBacksMy feser one has a lot of air dissolved into the fluid.
I have had an air lock, which I have finally removed but I can still see the air bubbles moving around.
Is this normal
All help appreciated
Thanks
My feser one has a lot of air dissolved into the fluid.
I have had an air lock, which I have finally removed but I can still see the air bubbles moving around.
Is this normal
All help appreciated
Thanks
I've used diluted feser one in my system and found that the bubbles went after about a week of use.
For the first few days bubbles and cloudiness were quite abundant.
Main PC: Asus Rampage IV Extreme / 3960X@4.5GHz / Antec H1200 Pro / 32GB DDR3-1866 Quad Channel / Sapphire Fury X / Areca 1680 / 850W EVGA SuperNOVA Gold 2 / Corsair 600T / 2x Dell 3007 / 4 x 250GB SSD + 2 x 80GB SSD / 4 x 1TB HDD (RAID 10) / Windows 10 Pro, Yosemite & Ubuntu
HTPC: AsRock Z77 Pro 4 / 3770K@4.2GHz / 24GB / GTX 1080 / SST-LC20 / Antec TP-550 / Hisense 65k5510 4K TV / HTC Vive / 2 x 240GB SSD + 12TB HDD Space / Race Seat / Logitech G29 / Win 10 Pro
HTPC2: Asus AM1I-A / 5150 / 4GB / Corsair Force 3 240GB / Silverstone SST-ML05B + ST30SF / Samsung UE60H6200 TV / Windows 10 Pro
Spare/Loaner: Gigabyte EX58-UD5 / i950 / 12GB / HD7870 / Corsair 300R / Silverpower 700W modular
NAS 1: HP N40L / 12GB ECC RAM / 2 x 3TB Arrays || NAS 2: Dell PowerEdge T110 II / 24GB ECC RAM / 2 x 3TB Hybrid arrays || Network:Buffalo WZR-1166DHP w/DD-WRT + HP ProCurve 1800-24G
Laptop: Dell Precision 5510 Printer: HP CP1515n || Phone: Huawei P30 || Other: Samsung Galaxy Tab 4 Pro 10.1 CM14 / Playstation 4 + G29 + 2TB Hybrid drive
This has been like this now for 2 weeks and is not getting any better.
Odd....is it neat or diluted?
Main PC: Asus Rampage IV Extreme / 3960X@4.5GHz / Antec H1200 Pro / 32GB DDR3-1866 Quad Channel / Sapphire Fury X / Areca 1680 / 850W EVGA SuperNOVA Gold 2 / Corsair 600T / 2x Dell 3007 / 4 x 250GB SSD + 2 x 80GB SSD / 4 x 1TB HDD (RAID 10) / Windows 10 Pro, Yosemite & Ubuntu
HTPC: AsRock Z77 Pro 4 / 3770K@4.2GHz / 24GB / GTX 1080 / SST-LC20 / Antec TP-550 / Hisense 65k5510 4K TV / HTC Vive / 2 x 240GB SSD + 12TB HDD Space / Race Seat / Logitech G29 / Win 10 Pro
HTPC2: Asus AM1I-A / 5150 / 4GB / Corsair Force 3 240GB / Silverstone SST-ML05B + ST30SF / Samsung UE60H6200 TV / Windows 10 Pro
Spare/Loaner: Gigabyte EX58-UD5 / i950 / 12GB / HD7870 / Corsair 300R / Silverpower 700W modular
NAS 1: HP N40L / 12GB ECC RAM / 2 x 3TB Arrays || NAS 2: Dell PowerEdge T110 II / 24GB ECC RAM / 2 x 3TB Hybrid arrays || Network:Buffalo WZR-1166DHP w/DD-WRT + HP ProCurve 1800-24G
Laptop: Dell Precision 5510 Printer: HP CP1515n || Phone: Huawei P30 || Other: Samsung Galaxy Tab 4 Pro 10.1 CM14 / Playstation 4 + G29 + 2TB Hybrid drive
No its neat (pre mixed)
now the air locks gone it will take a while to shift them all, make sure its not on 24/7 or they wont get a chance to settle
The other change, is swap a swiftech reservoir from a version 1 to a 2. Could this be a problem?
well u need to make sure its topped up or air will keep getting back in
jump start psu (or use spare psu for pump only) so only pump running (PC not on)
top the res up completely
tilt the case around
vary the flow (pump on & off and pinch tubing)
Never let air get sucked from the res into the pump or you are back to square one again.
Thanks for the advise but I have done this. I think the feser is so air-rated that I will have to drain it down and start from scratch.
can you list your components order, or better still, post a photo - there might be something making this more difficult than it needs to be.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote