I am having issues with this configuration will not span and when i do raid 0 i only see 750gb?!!
anyone had any luck with this configuration on the icybox
cheers
how can i fix it if u know or have similar working cheers.
Printable View
I am having issues with this configuration will not span and when i do raid 0 i only see 750gb?!!
anyone had any luck with this configuration on the icybox
cheers
how can i fix it if u know or have similar working cheers.
Which Seagate HDD?
The only one reported to work is 1500 GB Barracuda 7200.11, ST31500341AS
That's the one I have with the latest firmware on it the only 1.5tb drive at mo, says it works ok the wiki site but doesn't got both to latest firmware too
Have you tried to install each on the drives on their own?
To rule out a HDD defect.
Can you ssh to the NAS with both disks attached.
# ls -l /dev/hd*
# mount -v
If there is a Software Raid already created
# mdadm -D /dev/md{x}
x id the actual Raid id
Thank you all for your help.
I recently got a new BETA firmware, which allowed the seagate drives to work fine. They also reported that they have a beta that also allows the 2tb drives now to work.
They both now raid and can be spanned. Showing up as approx 2.6tb perfect.
only issue with the beta stuff is that most apps do not work.
I had tried to format each at a time to answer the previous question thanks. Only with the firmware given its fine.
Cheers:rolleyes:
where do you find that beta firmware?
got a link? i am getting the same setup
just rang the german helpdesk from the site or you can just email stating you have this setup u need the right firmware.
is this a firmware for the HDD or the NAS box?
The latest firmware that i am aware of is the 2.6.3.1 20092803 or sumthing like that.
and i am also aware of some firmware issues with the seagate drives, but i am hoping my drives have been shipped with the updates.