Results 1 to 9 of 9

Thread: Why don't HDD manufacturers read from all heads simultaneously?

  1. #1
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Why don't HDD manufacturers read from all heads simultaneously?

    A quick look at the performance of HDD's all in the same family, only with more or less platters makes it obvious that they only read from 1 or 2 heads at once. Why is this?
    Discuss
    Last edited by badass; 22-04-2009 at 08:47 PM. Reason: typo - typed platters rather then heads
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  2. #2
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    It's a good quastion. For years I assumed they did, but then worked out they didn't when I got to know more about them.

    I have no idea, but there must be a fundamental reason why they don't as it would be an easy, massive gain in performance if they could.

  3. #3
    Senior Member
    Join Date
    Jun 2008
    Posts
    1,495
    Thanks
    2
    Thanked
    143 times in 119 posts
    • BobF64's system
      • Motherboard:
      • Asus P8Z77-V Pro
      • CPU:
      • Intel Core i7-3770K
      • Memory:
      • 16GB Corsair XMS3 PC3-12800
      • Storage:
      • Multiple HDD and SSD drives
      • Graphics card(s):
      • ASUS DUAL-GTX1060-06G
      • PSU:
      • 750W Silverstone Strider Gold Evolution
      • Case:
      • Silverstone Fortress FT02
      • Operating System:
      • Windows 10 x64 Pro
      • Monitor(s):
      • HP ZR24w

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    The heads dont move independantly, they move as a set.

    Having them move independantly would require more motors and more logic or fewer heads and platters.

    So I guess in theory they could be made that way, and therefore get faster reads.


    They can, I believe, read from multiple platters at the same time, provided the head is over correct location.


    Mind you, I have been known to be wrong before.

  4. #4
    Senior Member
    Join Date
    Aug 2008
    Posts
    492
    Thanks
    8
    Thanked
    106 times in 80 posts

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Apparently someone has filed a patent for a design which can do this, if you fancy a little light bedtime reading.

    No idea if it's actually been made to work in practice, but the difficulty is explained in paragraphs 7/8/9 of "Background to the invention".

  5. Received thanks from:

    badass (22-04-2009)

  6. #5
    YUKIKAZE arthurleung's Avatar
    Join Date
    Feb 2005
    Location
    Aberdeen
    Posts
    3,280
    Thanks
    8
    Thanked
    88 times in 83 posts
    • arthurleung's system
      • Motherboard:
      • Asus P5E (Rampage Formula 0902)
      • CPU:
      • Intel Core2Quad Q9550 3.6Ghz 1.2V
      • Memory:
      • A-Data DDR2-800 2x2GB CL4
      • Storage:
      • 4x1TB WD1000FYPS @ RAID5 3Ware 9500S-8 / 3x 1TB Samsung Ecogreen F2
      • Graphics card(s):
      • GeCube HD4870 512MB
      • PSU:
      • Corsair VX450
      • Case:
      • Antec P180
      • Operating System:
      • Windows Server 2008 Standard
      • Monitor(s):
      • Dell Ultrasharp 2709W + 2001FP
      • Internet:
      • Be*Unlimited 20Mbps

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Feel free to prove me wrong, but if you use multiple heads, the magnetic field of each head would interfere with each other, preventing data to be written onto the disk reliably.

    If you have two heads writing the same spot, one want to write a 1 (Lets say upward) onto disk 1, and one want to write a 0 (Downward) onto disk2. The two fields would cancel each other. You get a valid write on disk2, but not on disk1. There is also possibility that the two heads attracts to each other, causing the head to hit the disk surface.

    --------------Head 1
    ------------------------------Disk 1
    --------------Head 2
    ------------------------------Disk 2

    You really DON'T want any force other than aerodynamics acting on the head. Otherwise the head will just crash onto the disk.
    It will certainly work with optical media though.


    Or if you place 2 actuator arms on the harddrive each reading off each end of the disc (Which means double the number of heads). It will work, but from the mechanical complexity and reliability point of view, why not just get 2 harddrives with single head.
    Last edited by arthurleung; 22-04-2009 at 12:56 AM.
    Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
    Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
    Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
    HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
    Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery

    Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
    Display (Projector): Epson TW-3500 1080p
    Speakers: Creative Megaworks THX550 5.1
    Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro

    Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
    Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2

  7. #6
    Member
    Join Date
    Dec 2004
    Posts
    192
    Thanks
    0
    Thanked
    10 times in 10 posts

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Quote Originally Posted by arthurleung View Post
    Feel free to prove me wrong, but if you use multiple heads, the magnetic field of each head would interfere with each other, preventing data to be written onto the disk reliably.
    I can't prove it but I remember reading that the magnetic field to write to disk platter media has to be very very strong (Technical Term) Its confined to a tiny microscopic area just below the head its not penetrating. otherwise it would affect the data adjacent or on the other side of the platter. rubbing a powerful magnet over a platter is not enough to wipe it properly.

    Its why residual magnetism is left from previous writes to the disk and can be read with more accurate reading heads in forensic examinations. the heads on subsiquent writes which may not be alligned exactly and leave the old data on the edge of the track or a bit deeper in to the track.


    Its the head technology / magnetic media thats mostly made these massive capacity drives available in such a small form factor.


    Storage review has an article on this, they state that the elecrtonics to process the data from the heads and send to the PC are not up to the job "on the drive" with ready available controllers (processing bandwidth etc). It may well be able to be done now though, it might just be a cost complexity decision now as electronics in Solid State drives prove they can be faster transfering data, sata for example can have very high sustained speeds.

  8. #7
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Quote Originally Posted by BobF64 View Post
    The heads dont move independantly, they move as a set.

    Having them move independantly would require more motors and more logic or fewer heads and platters.

    So I guess in theory they could be made that way, and therefore get faster reads.


    They can, I believe, read from multiple platters at the same time, provided the head is over correct location.
    They can't and that is what I am asking about.
    Why not read from all heads at once or at the very least all top or all bottom heads. Access time wouldn't be affected much but sequential reads and writes would go through the roof!

    For Proof that only one head (or possible 1 platter - i.e. 2 heads) is reading/writing at once, compare the sequential read/write speeds of drives from the same family that differ only in numbers of platters. Often the single platter drives are faster
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  9. #8
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Quote Originally Posted by arthurleung View Post
    Feel free to prove me wrong, but if you use multiple heads, the magnetic field of each head would interfere with each other, preventing data to be written onto the disk reliably.

    If you have two heads writing the same spot, one want to write a 1 (Lets say upward) onto disk 1, and one want to write a 0 (Downward) onto disk2. The two fields would cancel each other. You get a valid write on disk2, but not on disk1. There is also possibility that the two heads attracts to each other, causing the head to hit the disk surface.

    --------------Head 1
    ------------------------------Disk 1
    --------------Head 2
    ------------------------------Disk 2

    You really DON'T want any force other than aerodynamics acting on the head. Otherwise the head will just crash onto the disk.
    It will certainly work with optical media though.
    Sounds plausible. Heat assisted recording may help with this
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  10. #9
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: Why don't HDD manufacturers read from all heads simultaneously?

    Quote Originally Posted by CaptainCrash View Post
    Apparently someone has filed a patent for a design which can do this, if you fancy a little light bedtime reading.

    No idea if it's actually been made to work in practice, but the difficulty is explained in paragraphs 7/8/9 of "Background to the invention".
    That explains it
    The tracks are only "Quasi Aligned" for various reasons and can be several microns out.
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DVD player that can read external HDD via USB
    By Taz in forum Consumer Electronics
    Replies: 20
    Last Post: 13-02-2012, 10:29 PM
  2. Replies: 2
    Last Post: 29-04-2008, 10:07 AM
  3. Replies: 7
    Last Post: 04-03-2007, 10:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •