hi there
ive re-built my comp, pritty much a new pc. everything powers on, all fans spin, hd spins (but doesnt boot by the sound of it), however on the moniter i get NOTHING. just "NO SIGNAL", the light is on orrange for standby. ive literaly replaced every component near enough. ive used
ati 4870 / 7950gt
p5b deluxe / p5vd2-mx se
e6700 / pentium D 3.2GHz
xms2 ddr2 800mhz ram / cheap 667 ram
2 differnt hard drives. 1 with old os, 1 brand new. currently none pluged in
the 1s b4 the / are the new items, the 1s after are the old, working pulls from my old build. psu is a 720w hiper type R.
ive rebuild this system several times..... same result every time. im using the moniter from my old build, which worked fine, but even with ALL the old components put back, still no signal
ive put both the 4 pin, cpu power cables in, both 6 pin gfx card cables, the big eatx cable (or watever its called) is in. ive gone though all the connections to make sure they are all in tight, still no luck. ive tryed clearing my cmos, even left it overnight. ive used the onboard gfx on my old crappy mobo, same result.
the only thing ive got left to try, is to find another moniter, and try that. im pritty sure this wont help as it was working b4 i started messing with my computor.......
any help would be greatly appreciated...... ive been close to putting my foot through it a few times
so to summerise
pc worked fine - changed all the compenents, now it doesnt - changed all the old ones back in, still cant get it to work
thanks in advance