Hi guys,
So I've sold the Runcore drive in my Dell Mini, but the very small screw holding it in is stuck. I don't want to risk stripping the head. Can anyone recommend a shop that might be able to help? Watchmaker maybe? Any ideas?
Cheers...
Printable View
Hi guys,
So I've sold the Runcore drive in my Dell Mini, but the very small screw holding it in is stuck. I don't want to risk stripping the head. Can anyone recommend a shop that might be able to help? Watchmaker maybe? Any ideas?
Cheers...
Some WD40??
http://blogs.amctv.com/future-of-cla...25/spyhard.jpg
OK....not such a good idea then!
Just get a good fitting screw driver on it, failing that some pliers, just be careful.
Never managed to span off a screw head just takeing them out.
You're more likely to strip the screw head if you're not careful.
Get the correct sized screw driver, I've had to do the first turn to losen screws by turning the screw driver with pliers before (pushing down on the drivers with one hand turning with pliers with the other hand)
However that's only ever with the thin metal jewlers type screw drivers.
i doubt its stuck, just very tight :)
as above, you need the correct driver for the job and should be able to pick up a set for a couple of quid.