what mobo should i use out of the two i got please

[lock]

hi guys


ok got a asus p4p800 & p4s800d ok now i have a p4 2.8 to run in whitch one do i use as i would like to overclock it ..

all so i will put in 3 x sticks of twinmos 3200 men

and a asus g4 ti4600 128mb

anyone can give me some info thanks

[Mulda]

Don't know whether it's been sorted with a BIOS update, but the P4S800D only allowed +0.1V on the Vcore on release and didn't clock too well either in the reviews I saw.

Either way, you want to be using either 2 or 4 sticks of RAM otherwise you'll force whichever you use into single channel memory mode.

[0iD]

Found this link, might b of use??

http://www.xbitlabs.com/articles/mai...ernatives.html

They tested bot the p4p800 & the p4s800 boards side by side.

[lock]

thanks guys for replys ..it dont seam like i got good boards ..

can anyone tell me the best board to have p4 side for clocking thanks

[skattrd]

The p4p800 should be ok for 250fsb+ I've seen reviews where they got them upto 280mhz, so I'd see how far it'll go before splashing out on a new board

[unrealrocks]

P4C800 is ment to be the best for clocking ... my P4P800 got 250Mhz stable.

[lock]

ok m8 will try that 1st but i will try my 2.6 1st you never know it could all end in a puff

[Korky]

asus p4c800 and abit ic7-max3, cant go wrong either way. these are the best p4 o/c boards u can buy.

[skattrd]

asus p4c800 and abit ic7-max3, cant go wrong either way. these are the best p4 o/c boards u can buy.

What about the lanparty pro875b ?
I've seen some very good reviews of this, mine arrives shortly as well