Scary Beeping problem on my NF7-S?
Ok... This is quite scary :eek:. I'm like 90% sure its my NF7-S Making this High then Low then High then Low etc. Beeping noises, because what else would?. This only happens if i'm having the computer on for a while and doing a lot of things and just working it. What does this mean? Is it overheating? Is it just some stupid error that people can turn off?
Thanks!
My Bios Settings For The Abit NF7-S v2.0
BIOS SETTINGS (Those That Differ From Optimized Defaults)
Motherboard: Abit NF7-S v2.0
BIOS Version: 23
Category: Softmenu 3 Setup
>
CPU Interface: Enabled
CPU Over Temp Protect: 65
Category: Standard CMOS Features
>
Halt On: No Errors
Category: Advanced BIOS Features
>
First Boot Device: HDD 0
Second Boot Device: CDROM
Third Boot Device: Floppy
Boot Other Device: Disabled
Category: Advanced Chipset Features
>
System BIOS Cacheable: Disabled
Video RAM Cacheable: Disabled
AGP Aperture Size: 128
FSB Spread Spectrum: Disabled
AGP Spread Spectrum: Disabled
CPU Thermal Throttling: Disabled
Enhanced PCI Performance: Enabled
CPU Disconnect Function: Disabled
AGP Transfer Rate: 8x
AGP Fastwrite Capability: Disabled
Category: Integrated Peripherals
>
OnChip PCI Device
USB Keyboard: BIOS
IEEE1394: Disabled
Onboard PCI Device:
Serial ATA Controller: Disabled
Init Display First: AGP
Onboard Serial Port 1: Disabled
Onboard Serial Port 2: Disabled
Onboard Parallel Port: Disabled
I hope this helps if not with the beep problem as a general guide on how to configure your bios correctly.