Page 1 of 2 12 LastLast
Results 1 to 16 of 18

Thread: The Windows TV and/or Remote Control my PC thread

  1. #1
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    The Windows TV and/or Remote Control my PC thread

    Since it is a complete minefield trying to either remote control your PC using a handheld and/or watch TV on a windows PC, I thought I'd start a thread to summarize the various options out there and how good they are.
    I plan to list hardware, driver versions and windows versions along with comments on everything everyone has used so far.
    e.g. for My hauppauge WinTV Nova TD stick I would say:

    OS: Windows 7 RTM 64 bit
    RAM: 8GB
    GFX card: ATI Radeon 4870 Cat 9.9
    Hardware: hauppauge WinTV Nova TD stick
    Driver version: TBC - latest at sept 09
    Software: Windows Media Center with no add ons
    Notes:
    With a signal booster, TV quality is fine
    Remote simply does not work after resume from standby. PC needs reboot to sort. *changed at 15/10/09*
    Remote control goes mental in media center after using for a few minutes with just the driver. To resolve, install the full WinTV7 CD 1.2a. Still does not resume from standby.

    OS: Windows Vista 64 bit:
    Similar problems to above with just the drivers. Not tried the wintv7 cd 1.2a to resolve the possessed remote problem.


    Remote control:
    Windows mobile Phone running windows sideshow.
    Windows 7 RTM with windows sideshow running.
    This on paper showed much promise - more or less turn my Windows mobile into a remote control. All I need is bluetooth.
    In practice, however the Windows side of the software simply crashed. It is not currently (Sept 09) supported on Windows 7

    The Main areas of interest are relaibility, signal quality and whether the remote works, particularily after standby. As far as I can tell, there is simply no TV tuner card out tehre that the remote works on properly after standby. I hope to be proven wrong.
    I expect this will be particularily usefull for people planning on building an HTPC.

    Hardware: Windows Media remote from MS.
    OS: All Windows since XP.
    Remote "just works" No problems reported including working fine from standby.

    Hardware: NovaT 500
    OS: Windows Vista, XP, 7
    All features work fine prior to 7. Resume from standby does not work on Windows 7.
    Last edited by badass; 15-10-2009 at 09:18 PM. Reason: update info
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  2. #2
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: Thw Windows TV and/or Remote control my PC thread

    ....
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  3. #3
    Senior Member
    Join Date
    Feb 2007
    Location
    Slough
    Posts
    439
    Thanks
    4
    Thanked
    18 times in 17 posts
    • kungpo's system
      • Motherboard:
      • ASUS P6T SE
      • CPU:
      • i7 920 @ 3.90 Ghz
      • Memory:
      • 6x 2GB Corsair DDR3 1600
      • Storage:
      • 2x WD AAKS 640GB RAID0
      • Graphics card(s):
      • 260 GTX
      • PSU:
      • Corsair 1000HX
      • Case:
      • Silverstone Fortress
      • Operating System:
      • Windows 7 Professional x64
      • Monitor(s):
      • 2x LG L1952S
      • Internet:
      • 3MB ADSL

    Re: The Windows TV and/or Remote Control my PC thread

    Windows MCE remote control from MS? Not expensive and really does work.

  4. #4
    Senior Member
    Join Date
    Sep 2006
    Location
    Leeds
    Posts
    2,599
    Thanks
    81
    Thanked
    106 times in 94 posts

    Re: The Windows TV and/or Remote Control my PC thread

    Windows MCE remote is great, cant go wrong with one of those. Both my HTPCs use them

  5. #5
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: The Windows TV and/or Remote Control my PC thread

    What OS's do you two use?
    Are they fine after resuming from standby?
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  6. #6
    Senior Member
    Join Date
    Feb 2007
    Location
    Slough
    Posts
    439
    Thanks
    4
    Thanked
    18 times in 17 posts
    • kungpo's system
      • Motherboard:
      • ASUS P6T SE
      • CPU:
      • i7 920 @ 3.90 Ghz
      • Memory:
      • 6x 2GB Corsair DDR3 1600
      • Storage:
      • 2x WD AAKS 640GB RAID0
      • Graphics card(s):
      • 260 GTX
      • PSU:
      • Corsair 1000HX
      • Case:
      • Silverstone Fortress
      • Operating System:
      • Windows 7 Professional x64
      • Monitor(s):
      • 2x LG L1952S
      • Internet:
      • 3MB ADSL

    Re: The Windows TV and/or Remote Control my PC thread

    Actually, don't use standby on my HTPC but I suspect it doesn't wake it up.

    I have used trhe same control on XP MCE, Vista Home Premium and now 7 Professional.

  7. #7
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: The Windows TV and/or Remote Control my PC thread

    The MCE remote will wake a PC from standby. It is probably the most compatible remote out there, it even works with MythTV on linux.

    An issue you may have with standby is your tuner not being re-initialised very quickly. this is a problem with USB attached tuners, and the PCI cards (like the Nova-T500) which have a couple of USB tuners and a USB controller on a single PCI card. I believe the Nova-T can take 20 seconds to resume. Mediaportal has the ability to wake up early and wait for the cards to become available when powering up on a schedule.

  8. #8
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: The Windows TV and/or Remote Control my PC thread

    Quote Originally Posted by kungpo View Post
    Windows MCE remote control from MS? Not expensive and really does work.
    Quote Originally Posted by s_kinton View Post
    Windows MCE remote is great, cant go wrong with one of those. Both my HTPCs use them
    Quote Originally Posted by Funkstar View Post
    The MCE remote will wake a PC from standby. It is probably the most compatible remote out there, it even works with MythTV on linux.

    An issue you may have with standby is your tuner not being re-initialised very quickly. this is a problem with USB attached tuners, and the PCI cards (like the Nova-T500) which have a couple of USB tuners and a USB controller on a single PCI card. I believe the Nova-T can take 20 seconds to resume. Mediaportal has the ability to wake up early and wait for the cards to become available when powering up on a schedule.
    What other hardware and OS combinations do all of you use? What are your experiences.
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  9. #9
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: The Windows TV and/or Remote Control my PC thread

    Too many combinations to list really.

    XP with a couple of Nova-T 500s and MediaPortal
    Vista 64bit with a couple of Nova-T 500s and MediaPortal TV Server with Vista 32bit clients

    Currently my TV server is dead as something has become messed up. Thinking about moving to Win7, but also thinking about Sever 2008 and hacking TV card support into it. Works well I'm told.

    I also have two Pinacle dual DVB-T cards, but my motherboard will only take one because of PCIe lane limitations and my two RAID cards. Pain in the neck that.

    For MediaPortal, Vista is highly recommended, support for XP will be dropped with MP2 which is looming on the horizon. I don't blame the developers, means a lot of work arounds can be dropped, it is very old OS now.

  10. #10
    Senior Member
    Join Date
    Feb 2007
    Location
    Slough
    Posts
    439
    Thanks
    4
    Thanked
    18 times in 17 posts
    • kungpo's system
      • Motherboard:
      • ASUS P6T SE
      • CPU:
      • i7 920 @ 3.90 Ghz
      • Memory:
      • 6x 2GB Corsair DDR3 1600
      • Storage:
      • 2x WD AAKS 640GB RAID0
      • Graphics card(s):
      • 260 GTX
      • PSU:
      • Corsair 1000HX
      • Case:
      • Silverstone Fortress
      • Operating System:
      • Windows 7 Professional x64
      • Monitor(s):
      • 2x LG L1952S
      • Internet:
      • 3MB ADSL

    Re: The Windows TV and/or Remote Control my PC thread

    Er, nothing that sophisticated; Currently ASUS P5Q Deluxe, E5200 (was E4300), 4GB ram, Windows 7, Hauppauge PVR 4000 connected to dish at Astra 2, ATI 2600 Pro with DVI>HDMI adapter to Sony AV amp to Sharp 42" LCD, with MS MCE remote and IR receiver.

    I have tried several combo's of hardware with XP MCE, Vista MCE, and now 7 MCE, although I did find the 7 RC slightly more stable than the RTM code. XP and Vista ran no bother, although originally had a basic Hauppauge DVB-T PCI card before the PVR 4000.

  11. #11
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: The Windows TV and/or Remote Control my PC thread

    Quote Originally Posted by Funkstar View Post
    Too many combinations to list really.

    XP with a couple of Nova-T 500s and MediaPortal
    Vista 64bit with a couple of Nova-T 500s and MediaPortal TV Server with Vista 32bit clients

    Currently my TV server is dead as something has become messed up. Thinking about moving to Win7, but also thinking about Sever 2008 and hacking TV card support into it. Works well I'm told.

    I also have two Pinacle dual DVB-T cards, but my motherboard will only take one because of PCIe lane limitations and my two RAID cards. Pain in the neck that.

    For MediaPortal, Vista is highly recommended, support for XP will be dropped with MP2 which is looming on the horizon. I don't blame the developers, means a lot of work arounds can be dropped, it is very old OS now.
    Do you only use mediaportal? I'll add that to the list if it creates a nice fuzzy warm "it just works" feeling.

    Quote Originally Posted by kungpo View Post
    Er, nothing that sophisticated; Currently ASUS P5Q Deluxe, E5200 (was E4300), 4GB ram, Windows 7, Hauppauge PVR 4000 connected to dish at Astra 2, ATI 2600 Pro with DVI>HDMI adapter to Sony AV amp to Sharp 42" LCD, with MS MCE remote and IR receiver.

    I have tried several combo's of hardware with XP MCE, Vista MCE, and now 7 MCE, although I did find the 7 RC slightly more stable than the RTM code. XP and Vista ran no bother, although originally had a basic Hauppauge DVB-T PCI card before the PVR 4000.
    All working fine and reliably in all cases? Would it be possible to test resume from standby?
    I'll add your details to the top post
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  12. #12
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: The Windows TV and/or Remote Control my PC thread

    Quote Originally Posted by badass View Post
    Do you only use mediaportal? I'll add that to the list if it creates a nice fuzzy warm "it just works" feeling.
    In that case I wouldn't get my hopes up. Generally, MCE is easier to set up from what I've heard, I've just never really used it. MP can take some setting up, but is generally much more powerful and flexible than MCE. Oh and MCE is not client/server based, so that kind of rules it out for me. Once I get things working as I want them (more a function of time than anything else i think) I'll have living room, kitchen and bedroom clients, with one server in the study. Will also be able to stream to my desktop in the study too.


    Quote Originally Posted by badass View Post
    All working fine and reliably in all cases? Would it be possible to test resume from standby?
    I'll add your details to the top post
    No, not reliably in all cases. I have an issue right now where MP can see my tuners but won't tune to anything on them. I can't decide if it's a driver or MP issue. This is with both the Pinnacle and the Hauppauge. This is why I'm thinking of wiping the OS and starting fresh. MP 1.1.0 RC1 is out soon, so I might just wait for that.

    I don't miss not having TV, all this is more for fun than anything else

  13. #13
    Senior Member
    Join Date
    Mar 2005
    Posts
    4,932
    Thanks
    171
    Thanked
    383 times in 310 posts
    • badass's system
      • Motherboard:
      • ASUS P8Z77-m pro
      • CPU:
      • Core i5 3570K
      • Memory:
      • 32GB
      • Storage:
      • 1TB Samsung 850 EVO, 2TB WD Green
      • Graphics card(s):
      • Radeon RX 580
      • PSU:
      • Corsair HX520W
      • Case:
      • Silverstone SG02-F
      • Operating System:
      • Windows 10 X64
      • Monitor(s):
      • Del U2311, LG226WTQ
      • Internet:
      • 80/20 FTTC

    Re: The Windows TV and/or Remote Control my PC thread

    first post updated
    Remote still does not work from standby, however problem with it doing it's own thing sorted.
    "In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."

  14. #14
    Lovely chap dangel's Avatar
    Join Date
    Aug 2005
    Location
    Cambridge, UK
    Posts
    8,398
    Thanks
    412
    Thanked
    459 times in 334 posts
    • dangel's system
      • Motherboard:
      • See My Sig
      • CPU:
      • See My Sig
      • Memory:
      • See My Sig
      • Storage:
      • See My Sig
      • Graphics card(s):
      • See My Sig
      • PSU:
      • See My Sig
      • Case:
      • See My Sig
      • Operating System:
      • Windows 10
      • Monitor(s):
      • See My Sig
      • Internet:
      • 60mbit Sky LLU

    Re: The Windows TV and/or Remote Control my PC thread

    On standby problems - here's my current solution whilst my NOVA-T-500 drivers suck:

    -> Set the bios to wake up via RTC every day at 5.30pm
    -> Use the task scheduler to shut the machine down at 2.30am "shutdown.exe /s /f /t 30"

    ATM I have a problem (Win 7 RTM) with the machine waking up - simply because the NOVA T 500 tuners (2) go missing after wake (this is a well known issue). Everything else works so far.

    I use the MS remote too - nothing comes close IMHO. Mine does wakeup from standby - you must check your bios settings keep USB alive during standby.
    Crosshair VIII Hero (WIFI), 3900x, 32GB DDR4, Many SSDs, EVGA FTW3 3090, Ethoo 719


  15. #15
    Senior Member
    Join Date
    Sep 2006
    Location
    Leeds
    Posts
    2,599
    Thanks
    81
    Thanked
    106 times in 94 posts

    Re: The Windows TV and/or Remote Control my PC thread

    Quote Originally Posted by badass View Post
    What other hardware and OS combinations do all of you use? What are your experiences.
    I've got two HTPCs, both using MS remotes to put them into S3 standby and wake them from it with zero problems. They're set to sleep after 20mins of no activity, both wake themselves up, record and then sleep when required. Both are dual booting with Vista 32bit and Win 7 32bit RC using Media Centre for all my needs.

    The setups are:

    HTPC 1 (Micro-ATX) - AMDx2 4000+, Asus M3N78-EM, 2Gb Kingston DDR2, 2x 1TB Samsung F2 HDDs & 80GB Samsung HDD, Pinnacle Dual DVB-T PCI tuner, Antec Minuet case, HDMI to HDTV

    HTPC 2 (Mini-ITX) - AMDx2 4850e, Zotac 8200-ITX WIFI, 2Gb Corsair DDR2, 60Gb Hitach 2.5" HDD, Compro u80 DVB-T USB tuner, Akasa Enigma case, HDMI to HDTV

    As Dangel says, the trick to getting this all to work is in the BIOS. Be sure that your USB devices are allowed to wake the PC from standy (also go into device manage, right click the device and make sure the allow to wake PC is ticked).

    S3 suspend is also something that will need turning on in the BIOS before windows can use it. By default some BIOS' have it turned off....
    Last edited by s_kinton; 16-10-2009 at 10:57 AM.

  16. #16
    Registered+
    Join Date
    Oct 2009
    Posts
    21
    Thanks
    0
    Thanked
    2 times in 2 posts

    Re: The Windows TV and/or Remote Control my PC thread

    Could anyone tell me where the best place to get a MS remote is? Can't really find them on sale any more.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 15
    Last Post: 27-06-2010, 10:09 AM
  2. Windows - hotfixing overview
    By Paul Adams in forum Software
    Replies: 13
    Last Post: 13-10-2009, 11:17 AM
  3. Windows Vista retail doomed unless Microsoft cuts prices?
    By Bob Crabtree in forum HEXUS News
    Replies: 132
    Last Post: 02-04-2007, 01:05 PM
  4. ATI Catalyst 5.8 released
    By =TcQi= in forum Graphics Cards
    Replies: 17
    Last Post: 18-08-2005, 12:35 AM
  5. Catalyst 5.3 Available Now
    By Steve in forum Graphics Cards
    Replies: 16
    Last Post: 15-03-2005, 12:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •