pop.... sinking feeling

[Zak33]

good call Kinton.. I found them on google actually.. but it's a size issue again... 81.5mm is a tad to deep.

[scaryjim]

Pico-psu? Only real issue is the cost once you factor in a suitable 12v power brick...

I've just had a look in an old sff case I've got lying around, but the PSU in that only has 12V and 5VSB rails, and can only managed 66w on the 12v rail anyway, so probably not much use to you

[Zak33]

66w could be a tad on the low side.. but ty for looking

[Stoo]

I did have a shuttle psu kicking around somewhere, I'll have a look in the loft - although it might have been junked a while ago..

[Pob255]

That's a really size 63.5mm x 44.5mm x 190mm
It's not a Flex (SFF), U1, U2, TFX or SFX

The closest I can find looking at both seasonic and FSP websites are Flex at 81.5mm x 40.5mm x 150-190mm
http://www.seasonic.com/product/pc_sff.jsp
http://www.fsp-group.com.tw/english/...inid=2&fid=143

Or TFX at 85mm x 70mm x 175mm

Only option is an ebay replacement seeing as shuttle no longer make/supply them.
http://cgi.ebay.co.uk/Shuttle-PC35I2...84972650314429

Other solution, get some long lengths of wire, use a normal atx PSU like a power brick, mod the wires to extend them and sleeve them into one big assed fat cable which you feed into the back of the shuttle.