Page 1 of 2 12 LastLast
Results 1 to 16 of 29

Thread: Thinking about watercooling...

  1. #1
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit
    Join the HEXUS Folding@home Team!!


  2. #2
    DILLIGAF GoNz0's Avatar
    Join Date
    Jun 2006
    Location
    Derby
    Posts
    10,872
    Thanks
    632
    Thanked
    1,192 times in 945 posts
    • GoNz0's system
      • Motherboard:
      • Asus Rampage V Extreme
      • CPU:
      • i7 something X99 based
      • Memory:
      • 16gb GSkill
      • Storage:
      • 4 SSD's + WD Red
      • Graphics card(s):
      • GTX980 Strix WC
      • PSU:
      • Enermax Galaxy 1250 (9 years and counting)
      • Case:
      • Corsair 900D
      • Operating System:
      • win10 64bit
      • Monitor(s):
      • Dell 24"
      • Internet:
      • 220mb Cable

    Re: Thinking about watercooling...

    you will need a res top so you can put the fittings on that as well

  3. Received thanks from:

    nibbler (15-05-2010)

  4. #3
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    Aha. But a pump top is purely for show?
    Join the HEXUS Folding@home Team!!


  5. #4
    DILLIGAF GoNz0's Avatar
    Join Date
    Jun 2006
    Location
    Derby
    Posts
    10,872
    Thanks
    632
    Thanked
    1,192 times in 945 posts
    • GoNz0's system
      • Motherboard:
      • Asus Rampage V Extreme
      • CPU:
      • i7 something X99 based
      • Memory:
      • 16gb GSkill
      • Storage:
      • 4 SSD's + WD Red
      • Graphics card(s):
      • GTX980 Strix WC
      • PSU:
      • Enermax Galaxy 1250 (9 years and counting)
      • Case:
      • Corsair 900D
      • Operating System:
      • win10 64bit
      • Monitor(s):
      • Dell 24"
      • Internet:
      • 220mb Cable

    Re: Thinking about watercooling...

    nope, they also allow a faster flow m8, some are for show more that performance

  6. Received thanks from:

    nibbler (15-05-2010)

  7. #5
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    On second thoughts would this be a good idea? After all, I already own an h50...

    http://www.overclock.net/water-cooli...adiator-2.html

    This guy managed mod his to fit a 240mm radiator and the pump is easily strong enough aparently. Would save me some space too

    EDIT: Except about a week later his block/pump died. Crap plan then
    Last edited by nibbler; 15-05-2010 at 10:42 AM.
    Join the HEXUS Folding@home Team!!


  8. #6
    DILLIGAF GoNz0's Avatar
    Join Date
    Jun 2006
    Location
    Derby
    Posts
    10,872
    Thanks
    632
    Thanked
    1,192 times in 945 posts
    • GoNz0's system
      • Motherboard:
      • Asus Rampage V Extreme
      • CPU:
      • i7 something X99 based
      • Memory:
      • 16gb GSkill
      • Storage:
      • 4 SSD's + WD Red
      • Graphics card(s):
      • GTX980 Strix WC
      • PSU:
      • Enermax Galaxy 1250 (9 years and counting)
      • Case:
      • Corsair 900D
      • Operating System:
      • win10 64bit
      • Monitor(s):
      • Dell 24"
      • Internet:
      • 220mb Cable

    Re: Thinking about watercooling...

    worth a try i guess

  9. #7
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    Quote Originally Posted by GoNz0 View Post
    you will need a res top so you can put the fittings on that as well
    How about kill two birds with one stone and get a 10w laing pump (will only be for a CPU and a dual 120mm rad so I think that is powerful enough?) + an xspc reservoir top?
    Join the HEXUS Folding@home Team!!


  10. #8
    DILLIGAF GoNz0's Avatar
    Join Date
    Jun 2006
    Location
    Derby
    Posts
    10,872
    Thanks
    632
    Thanked
    1,192 times in 945 posts
    • GoNz0's system
      • Motherboard:
      • Asus Rampage V Extreme
      • CPU:
      • i7 something X99 based
      • Memory:
      • 16gb GSkill
      • Storage:
      • 4 SSD's + WD Red
      • Graphics card(s):
      • GTX980 Strix WC
      • PSU:
      • Enermax Galaxy 1250 (9 years and counting)
      • Case:
      • Corsair 900D
      • Operating System:
      • win10 64bit
      • Monitor(s):
      • Dell 24"
      • Internet:
      • 220mb Cable

    Re: Thinking about watercooling...

    sounds like a plan, and if you want to turn it into a 18w its a very simple job to bridge a solder joint and turn it into the 18w version as they are infact the same beast

  11. Received thanks from:

    nibbler (15-05-2010)

  12. #9
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    Will it be short of flow at 10W? I reckon it should be ample for what I have planned but nice to know I could do that in the future
    Join the HEXUS Folding@home Team!!


  13. #10
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: Thinking about watercooling...

    It will have plenty of flow, I believe the black ice 240mm rad is the best out of the three you linked to however the XSPC one is good anyway. If you find it is short of flow when you upgrade to a 36mm rad or have new cpu's etc then yeh just volt mod it to the 18w version and your off!.
    Quote Originally Posted by snootyjim View Post
    Trust me, go into any local club and shout "I've got dual Nehalem Xeons" and all of the girls will practically collapse on the spot at the thought of your e-penis

  14. Received thanks from:

    nibbler (15-05-2010)

  15. #11
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    Cheers for the advice on the rad. I would have got the xspc because it's the brand I have heard of most but yeah, they are all almost identical in size. Which black ice?
    Join the HEXUS Folding@home Team!!


  16. #12
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: Thinking about watercooling...

    depends on your budget, the two black ice versions in the £30-£40 range are ok, the difference between the lite and normal gts version is that the lite is thinner i believe which affects performance so id say if room isnt an issue get the normal version. Whats your budget? And is size a factor because you could have a 360mm rad instead
    Quote Originally Posted by snootyjim View Post
    Trust me, go into any local club and shout "I've got dual Nehalem Xeons" and all of the girls will practically collapse on the spot at the thought of your e-penis

  17. #13
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    360 is too big. This isn't for any time soon, maybe at the end of summer or so. I'm definitely not looking to go for any single rad over 240mm, at the most a 240mm + a single 120mm.
    Join the HEXUS Folding@home Team!!


  18. #14
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: Thinking about watercooling...

    Ah ok, thats fair enough. So whats the budget? Cause theres obviously the thermochill p series which are regarded as top ones along with XSPC top end ones.
    However these are like £50/£60.
    Quote Originally Posted by snootyjim View Post
    Trust me, go into any local club and shout "I've got dual Nehalem Xeons" and all of the girls will practically collapse on the spot at the thought of your e-penis

  19. Received thanks from:

    nibbler (15-05-2010)

  20. #15
    Pre-Cambrian nibbler's Avatar
    Join Date
    Aug 2009
    Location
    London
    Posts
    3,668
    Thanks
    913
    Thanked
    266 times in 216 posts
    • nibbler's system
      • CPU:
      • i5-2410m
      • Memory:
      • 6GB ddr3 1333mhz
      • Storage:
      • 256GB Plextor M5S SSD
      • Graphics card(s):
      • 1GB 6650M
      • Operating System:
      • Windows 7 64 bit

    Re: Thinking about watercooling...

    Nah, I was looking at doing it for £180 all in. Thats for waterblock, tubing, connections, rad, res, pump, coil....
    Join the HEXUS Folding@home Team!!


  21. #16
    Senior Member Hicks12's Avatar
    Join Date
    Jan 2008
    Location
    Plymouth-SouthWest
    Posts
    6,586
    Thanks
    1,070
    Thanked
    340 times in 293 posts
    • Hicks12's system
      • Motherboard:
      • Asus P8Z68-V
      • CPU:
      • Intel i5 2500k@4ghz, cooled by EK Supreme HF
      • Memory:
      • 8GB Kingston hyperX ddr3 PC3-12800 1600mhz
      • Storage:
      • 64GB M4/128GB M4 / WD 640GB AAKS / 1TB Samsung F3
      • Graphics card(s):
      • Palit GTX460 @ 900Mhz Core
      • PSU:
      • 675W ThermalTake ThoughPower XT
      • Case:
      • Lian Li PC-A70 with modded top for 360mm rad
      • Operating System:
      • Windows 7 Professional 64bit
      • Monitor(s):
      • Dell U2311H IPS
      • Internet:
      • 10mb/s cable from virgin media

    Re: Thinking about watercooling...

    Pump- £60
    Waterblock- £30
    Tubing- £5
    barbs etc- £5
    Rad- £55
    Res-£20

    Total: £175 , although its only a recommendation , the rads your looking at do a decent job anyway.
    Quote Originally Posted by snootyjim View Post
    Trust me, go into any local club and shout "I've got dual Nehalem Xeons" and all of the girls will practically collapse on the spot at the thought of your e-penis

  22. Received thanks from:

    nibbler (15-05-2010)

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New easy watercooling from Corsair
    By Steve in forum HEXUS News
    Replies: 4
    Last Post: 05-01-2006, 10:29 AM
  2. Watercooling Radiator Idea
    By TeePee in forum Chassis and Mods
    Replies: 5
    Last Post: 10-08-2003, 11:37 PM
  3. Watercooling suggestion ?
    By tfboy in forum PC Hardware and Components
    Replies: 20
    Last Post: 30-07-2003, 11:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •