Printable View
Im pretty much kitted out now to cover any job that i get asked to do, however today when fixing an old dell laptop with a 2.5" ide drive i realised i had no way of connecting it to my pc for backup.
Any idea where i can get a convertor from ? For sata drives i use the PCB out of an old icy box external caddy lol.
http://i38.tinypic.com/15714iu.jpg
I use one of these at work http://www.scan.co.uk/Products/Shark...ATA-525-drives
although mine is StarTech brand, you just pop sata drives in the top or pull off the rubber cover and plug in the standard 3.5" IDE ribbon cable and power lead or the combined 2.5" PATA ribbon cable&power lead.
You can get a PATA to IDE ribbon & molex cable seperately so you can just plug it into a normal IDE slot on a motherboard.
Here we go.
PATA to IDE&power adaptor http://www.ebuyer.com/product/123998
This is the startech dock I got for work http://www.ebuyer.com/product/180460
so handy that I no longer have to dig around inside my pc at work every time I need to back up or recover data off hard drives.
I use one of these
http://cgi.ebay.co.uk/USB-2-0-SATA-I...sConnectors_RL
Does it come with any cables ? 2.5" ide cable would be handy..Quote:
Originally Posted by Pob255
I have one of those Quickports as well - very useful gadget!
Which one you have david ?Quote:
Originally Posted by DavidM
I *think* it's this one: http://www.scan.co.uk/Products/Shark...ATA-525-drives
I just use a little adaptor that plugs into the 2.5" drive and I can plug a molex power plug and a PATA cable into it. It cost about £2 from Ebay.Quote:
Originally Posted by modd1uk
The StarTech one I have did come with a cable, basically it's a short length of ribbon cable with a PATA (2.5" IDE drive connector) on one end with a normal IDE connector on the other and molex power connector
Like the simple adaptor I linked to but with a length of ribbon cable between the two ends.
The big advantage of thoes quick ports is that it sits on your desk, works via USB, so you don't need to go digging around inside your pc to plug stuff in and it's al hot swappable so no need to turn you pc off to switch drives.
Google image search
http://www.mkcables.com/images/mk26-0908.jpg
Type with cable
http://ecx.images-amazon.com/images/...500_AA300_.jpg
Type without cable (note you still plug in a normal ide ribbon cable into the adaptor to plug the drive in)
The one I have is different to both of those ! :)
http://i221.photobucket.com/albums/d...s/SAM_0216.jpg
If thats the case you would still need to drag a molex out of the system, even if using the quickport..?Quote:
Originally Posted by Pob255
I bought one of these off the classifieds
http://www.sharkoon.com/pix/illus/450/rdua06.jpg
http://www.sharkoon.com/html/produkt.../index_en.html
No because the quick port comes with a short IDE and power cable ;)Quote:
Originally Posted by modd1uk
Pic from scan
http://static.scan.co.uk/Images/Products/1093398-d.jpg
The quickport does not run purely off the USB power it needs a seperate power adaptor
From the Sharkoon website (for the one scan sells)
http://www.sharkoon.com/html/produkt...x_en.html?id=9
Package content:
• QuickPort Combo
• Power adapter
• USB cable • IDE cable
for 3.5" devices
• IDE cable for 2.5" HDDs
• Power cable
• Manual flyer
Yes you still need to turn off the Quickport, plug the IDE cable into the front and turn it back on again.
But that's a heck of a lot less messing around than turning off you pc, opening it up, plugging in the IDE cable, turning it on, going into the BIOS to make sure it doesn't try to boot off the newly installed hard drive . . . etc
If you regularly need to get data off diferent types of hard drive these boxes are an absolute god send. :)
I have a Kama Connect at work and can't recommend it highly enough, tbh...
Is there any of these IDE and S-ATA to USB devices that have an internal power transformer?
Can understand the Kama Connect doesn't, but the more bulker quick port style would benefit from one less item to carry around
I haven't seen any. There is a good reason for this too; with an internal power supply, each product in the range needs to go through the electrical safety certification and testing. With external supplies, only the supply needs testing so you can use that on as many different models as you like without re-testing anything. Add to that they will usually out source the supply production. :)
For 2.5" you should be able to power off USB, my Sharkoon Drive Link is capable of that I believe.
I say "I believe" because when I got it I cut through the packaging and the USB power cable with a pair of scissors :(
Doh! :wallbash:Quote:
Originally Posted by snootyjim
But yes the Sharkoon DriveLink can run off USB only (it uses two usb's for added power) but only when plugging in 2.5" sata or PATA hard drives
When plugging in a 3.5" or 5.25" sata or IDE drive (I believe it can run optical drives) you need to use the additional powersupply.
This is the same for any external enclosure,adaptor for 3.5" or 5.25" drives, usb cannot supply enough power for them, 2.5" drives are lower power so can run off usb only.