Safe temps 4 an OC P4?

Hey, just wondering what the max temp I should be aiming for under load when OC my 2.4C? Thanx guys :)

until it crashes or throttles, you wont kill it.

well im gettin 59 at full load with the fsb at 225 atm, dunno whether i should go n e further

My 3.2 p4 (also running at 225fsb) is anywhere between 55 & 62 depending on how warm the wheher is. Solid as a rock tho runnign 24/7.

is that idle or load 0iD?

That's load Karl. Runs seti as a service so it's loaded 24/7

How do you tell if it's throttling will the speed on various programs such as MBM actually fluctuate in real-time?

best thing todo is run a game with FPS counter on, as the processor loads it heats, then as it overheats it throttles and your fps will drop :)

What HS/F are you using? I've got the Intel standard crappy one, and mine hits 65oC full load, at 250FSB. Sits in the low 30's after about an hour of being idle..... There again, i've got 4 case fans too.

I'm using intel stock atm, with only 3 case fans in a cheiftec alu case, has n e one got any recommendations as to where to put them? its at 60 full load, so i might put it to 230 and see what happens, lets see if my ram can go to DDR 460 Shall we? :)

Dam it! :rant:

I kept getting this anoying beep from my mobo due to its health feature! so I desided to check the cpu temp, It was at 62 C. So I just decided to buy a Koolance external water cooling system!

Dam Far Cry!

I have yet to order it though, My temporary solution was to remove the side cover! How much heat can my 3 Ghz handle? Perhaps 75 C? Not OC!

Well I've got a cheiftec Dragon case, and i've got 2 at the front (intake) and 2 at the back (exhuast). Needs to blow air through the case, not just into/out of it. So preferably, if you have the 80mm fan slots like i have, 1 intake on the front, and one exhaust on the back. Im guessing the 3rd fan is on the side panel?

wow, its like ure psychic ;), yer ive got on on the HDD cage bit, one on the higher exhaust slot, and on on my side panel, that seem ok? (BTW I'm well impressed with this ram, im at DDR 460 now, 30Mhz OC it is :))

btw, does any one know any accurate temp monitoring programs? I dont really trust the one im using atm

sounds fine mate. I dont use the side fan though, but it shouldnt be a problem. Yea im quite blown away by my ram, had to RMA my TwinX and i've bought a gig of 3200 corsair value off my mate for £50. Its is running 250FSB like my TwinX did. Doesnt get 266FSB though (i will get 3.2Ghz!!)

EDIT : Thermal probes are the most accurate, but i dont use them so i can't recommend/help you out on that one

I've got a feelin ill be goin 4 it too soon enough ;) thanx 4 ure help, im still gettin 60C at 230, so more must be added :D thanx agen.