Results 1 to 7 of 7

Thread: How to wire up and power 2 fans?

  1. #1
    The Irish Drunk! neonplanet40's Avatar
    Join Date
    Oct 2003
    Location
    Stirling
    Posts
    5,305
    Thanks
    1,106
    Thanked
    268 times in 187 posts
    • neonplanet40's system
      • Motherboard:
      • Gigabyte X470 Aorus Gaming 7 Wi-Fi
      • CPU:
      • AMD Ryzen 7 5800X3D
      • Memory:
      • Patriot 32 GB DDR4 3200 MHz
      • Storage:
      • 1TB WD_Black SN770, 1TB Koxia nvme
      • Graphics card(s):
      • MSI RTX4070Ti Gaming X TRIO
      • PSU:
      • Enermax Supernova G6 850W
      • Case:
      • Lian LI Lancool 3
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Dell 27" U2715H & Gigabyte M27Q
      • Internet:
      • 1Gbe

    Question How to wire up and power 2 fans?

    Hi guys,

    Me and a friend are making a DIY LED lighting unit for our Marine aquariums. We are putting them in our exisiting hoods which also have 2 fans. Due to the fact that the entire internals are being ripped out. How could we add 2 80mm PC fans to our unit and power them?

    Im a noob so a guide would be great. Im hoping it would be an easy task?

    Thanks

    Mark
    Home Entertainment =Epson TW9400, Denon AVRX6300H, Panasonic DPUB450EBK 4K Ultra HD Blu-Ray and Monitor Audio Silver RX 7.0, Monitor Audio CT265IDC(x4) Dolby Atmos and XTZ 12.17 Sub - (Config 7.1.4)
    My System=Gigabyte X470 Aorus Gaming 7 Wi-Fi, AMD Ryzen 7 5800X3D, Patriot 32 GB DDR4 3200MHz, 1TB WD_Black SN770, 1TB Koxia nvme, MSI RTX4070Ti Gaming X TRIO, Enermax Supernova G6 850W, Lian LI Lancool 3, 2x QHD 27in Monitors. Denon AVR1700H & Wharfedale DX-2 5.1 Sound
    Home Server 2/HTPC - Ryzen 5 3600, Asus Strix B450, 16GB Ram, EVGA GT1030 SC, 2x 2TB Cruscial SSD, Corsair TX550, Plex Server & Nvidia Shield Pro 4K
    Diskstation/HTPC - Synology DS1821+ 16GB Ram - 10Gbe NIC with 45TB & Synology DS1821+ 8GB Ram - 10Gbe NIC with 14TB & Synology DS920+ 9TB
    Portable=Microsoft Surface Pro 4, Huawei M5 10" & HP Omen 15 laptop

  2. #2
    Mostly Me Lucio's Avatar
    Join Date
    Mar 2007
    Location
    Tring
    Posts
    5,163
    Thanks
    443
    Thanked
    448 times in 351 posts
    • Lucio's system
      • Motherboard:
      • Gigabyte GA-970A-UD3P
      • CPU:
      • AMD FX-6350 with Cooler Master Seldon 240
      • Memory:
      • 2x4GB Corsair DDR3 Vengeance
      • Storage:
      • 128GB Toshiba, 2.5" SSD, 1TB WD Blue WD10EZEX, 500GB Seagate Baracuda 7200.11
      • Graphics card(s):
      • Sapphire R9 270X 4GB
      • PSU:
      • 600W Silverstone Strider SST-ST60F
      • Case:
      • Cooler Master HAF XB
      • Operating System:
      • Windows 8.1 64Bit
      • Monitor(s):
      • Samsung 2032BW, 1680 x 1050
      • Internet:
      • 16Mb Plusnet

    Re: How to wire up and power 2 fans?

    If you can find one of these (http://www.maplin.co.uk/multi-fan-po...ol-board-98849) you just need to feed it a 12v output via a molex clip.

    Otherwise, something like this (http://www.kustompcs.co.uk/acatalog/info_1994.html) may also help in getting the right fans. Again though, 12v in is the maximum for the fans, and 7v if you want to run them quieter

    (\___/) (\___/) (\___/) (\___/) (\___/) (\___/) (\___/)
    (='.'=) (='.'=) (='.'=) (='.'=) (='.'=) (='.'=) (='.'=)
    (")_(") (")_(") (")_(") (")_(") (")_(") (")_(") (")_(")


    This is bunny and friends. He is fed up waiting for everyone to help him out, and decided to help himself instead!

  3. #3
    The Irish Drunk! neonplanet40's Avatar
    Join Date
    Oct 2003
    Location
    Stirling
    Posts
    5,305
    Thanks
    1,106
    Thanked
    268 times in 187 posts
    • neonplanet40's system
      • Motherboard:
      • Gigabyte X470 Aorus Gaming 7 Wi-Fi
      • CPU:
      • AMD Ryzen 7 5800X3D
      • Memory:
      • Patriot 32 GB DDR4 3200 MHz
      • Storage:
      • 1TB WD_Black SN770, 1TB Koxia nvme
      • Graphics card(s):
      • MSI RTX4070Ti Gaming X TRIO
      • PSU:
      • Enermax Supernova G6 850W
      • Case:
      • Lian LI Lancool 3
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Dell 27" U2715H & Gigabyte M27Q
      • Internet:
      • 1Gbe

    Re: How to wire up and power 2 fans?

    Thanks Lucio, im trying to see if I can attach them to the power supply I am using for the LEDs. It may be as easy as just conntecting them ins eries with the lights but i need to double check . . .
    Home Entertainment =Epson TW9400, Denon AVRX6300H, Panasonic DPUB450EBK 4K Ultra HD Blu-Ray and Monitor Audio Silver RX 7.0, Monitor Audio CT265IDC(x4) Dolby Atmos and XTZ 12.17 Sub - (Config 7.1.4)
    My System=Gigabyte X470 Aorus Gaming 7 Wi-Fi, AMD Ryzen 7 5800X3D, Patriot 32 GB DDR4 3200MHz, 1TB WD_Black SN770, 1TB Koxia nvme, MSI RTX4070Ti Gaming X TRIO, Enermax Supernova G6 850W, Lian LI Lancool 3, 2x QHD 27in Monitors. Denon AVR1700H & Wharfedale DX-2 5.1 Sound
    Home Server 2/HTPC - Ryzen 5 3600, Asus Strix B450, 16GB Ram, EVGA GT1030 SC, 2x 2TB Cruscial SSD, Corsair TX550, Plex Server & Nvidia Shield Pro 4K
    Diskstation/HTPC - Synology DS1821+ 16GB Ram - 10Gbe NIC with 45TB & Synology DS1821+ 8GB Ram - 10Gbe NIC with 14TB & Synology DS920+ 9TB
    Portable=Microsoft Surface Pro 4, Huawei M5 10" & HP Omen 15 laptop

  4. #4
    Mostly Me Lucio's Avatar
    Join Date
    Mar 2007
    Location
    Tring
    Posts
    5,163
    Thanks
    443
    Thanked
    448 times in 351 posts
    • Lucio's system
      • Motherboard:
      • Gigabyte GA-970A-UD3P
      • CPU:
      • AMD FX-6350 with Cooler Master Seldon 240
      • Memory:
      • 2x4GB Corsair DDR3 Vengeance
      • Storage:
      • 128GB Toshiba, 2.5" SSD, 1TB WD Blue WD10EZEX, 500GB Seagate Baracuda 7200.11
      • Graphics card(s):
      • Sapphire R9 270X 4GB
      • PSU:
      • 600W Silverstone Strider SST-ST60F
      • Case:
      • Cooler Master HAF XB
      • Operating System:
      • Windows 8.1 64Bit
      • Monitor(s):
      • Samsung 2032BW, 1680 x 1050
      • Internet:
      • 16Mb Plusnet

    Re: How to wire up and power 2 fans?

    Quote Originally Posted by neonplanet40 View Post
    Thanks Lucio, im trying to see if I can attach them to the power supply I am using for the LEDs. It may be as easy as just conntecting them ins eries with the lights but i need to double check . . .
    Well, what's the voltage and ampage of the power supply then!

    Share the information we need to answer

    (\___/) (\___/) (\___/) (\___/) (\___/) (\___/) (\___/)
    (='.'=) (='.'=) (='.'=) (='.'=) (='.'=) (='.'=) (='.'=)
    (")_(") (")_(") (")_(") (")_(") (")_(") (")_(") (")_(")


    This is bunny and friends. He is fed up waiting for everyone to help him out, and decided to help himself instead!

  5. #5
    The Irish Drunk! neonplanet40's Avatar
    Join Date
    Oct 2003
    Location
    Stirling
    Posts
    5,305
    Thanks
    1,106
    Thanked
    268 times in 187 posts
    • neonplanet40's system
      • Motherboard:
      • Gigabyte X470 Aorus Gaming 7 Wi-Fi
      • CPU:
      • AMD Ryzen 7 5800X3D
      • Memory:
      • Patriot 32 GB DDR4 3200 MHz
      • Storage:
      • 1TB WD_Black SN770, 1TB Koxia nvme
      • Graphics card(s):
      • MSI RTX4070Ti Gaming X TRIO
      • PSU:
      • Enermax Supernova G6 850W
      • Case:
      • Lian LI Lancool 3
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Dell 27" U2715H & Gigabyte M27Q
      • Internet:
      • 1Gbe

    Re: How to wire up and power 2 fans?

    Seeing as im noob i uploaded pics lol


    Home Entertainment =Epson TW9400, Denon AVRX6300H, Panasonic DPUB450EBK 4K Ultra HD Blu-Ray and Monitor Audio Silver RX 7.0, Monitor Audio CT265IDC(x4) Dolby Atmos and XTZ 12.17 Sub - (Config 7.1.4)
    My System=Gigabyte X470 Aorus Gaming 7 Wi-Fi, AMD Ryzen 7 5800X3D, Patriot 32 GB DDR4 3200MHz, 1TB WD_Black SN770, 1TB Koxia nvme, MSI RTX4070Ti Gaming X TRIO, Enermax Supernova G6 850W, Lian LI Lancool 3, 2x QHD 27in Monitors. Denon AVR1700H & Wharfedale DX-2 5.1 Sound
    Home Server 2/HTPC - Ryzen 5 3600, Asus Strix B450, 16GB Ram, EVGA GT1030 SC, 2x 2TB Cruscial SSD, Corsair TX550, Plex Server & Nvidia Shield Pro 4K
    Diskstation/HTPC - Synology DS1821+ 16GB Ram - 10Gbe NIC with 45TB & Synology DS1821+ 8GB Ram - 10Gbe NIC with 14TB & Synology DS920+ 9TB
    Portable=Microsoft Surface Pro 4, Huawei M5 10" & HP Omen 15 laptop

  6. #6
    Seething Cauldron of Hatred TheAnimus's Avatar
    Join Date
    Aug 2005
    Posts
    17,168
    Thanks
    803
    Thanked
    2,152 times in 1,408 posts

    Re: How to wire up and power 2 fans?

    Ok, not been harsh, well I am been characteristically harsh, ignore the links from lucio, they are cables glorified cables and a waste of dosh.

    Firstly I see you've got two controllers hooked up to a voltage supply, these then run two chains of the LEDs? If you upload details of the controllers I can check the assumption (those been the mother of all melting/fuseblowing f-up fairy visits!) that you've got a simple regulated 24V 2.5A source, which has a spare capacity for just wiring up two 12v fans in series.

    If you wire two 12v fans in series they will merrily run from a 24v voltage source. But we just want to check the load on the voltage source before we start doing that to stop some smoking.
    throw new ArgumentException (String, String, Exception)

  7. #7
    The Irish Drunk! neonplanet40's Avatar
    Join Date
    Oct 2003
    Location
    Stirling
    Posts
    5,305
    Thanks
    1,106
    Thanked
    268 times in 187 posts
    • neonplanet40's system
      • Motherboard:
      • Gigabyte X470 Aorus Gaming 7 Wi-Fi
      • CPU:
      • AMD Ryzen 7 5800X3D
      • Memory:
      • Patriot 32 GB DDR4 3200 MHz
      • Storage:
      • 1TB WD_Black SN770, 1TB Koxia nvme
      • Graphics card(s):
      • MSI RTX4070Ti Gaming X TRIO
      • PSU:
      • Enermax Supernova G6 850W
      • Case:
      • Lian LI Lancool 3
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Dell 27" U2715H & Gigabyte M27Q
      • Internet:
      • 1Gbe

    Re: How to wire up and power 2 fans?

    No problems mate thanks for the help the two controllers are

    1 x 1000mA buckpuck with potentiometer.
    1 x 700mA buckpuck with potentiometer.

    Yes they run two chains of LED's. The 1000mA is for the white LED's and the 700 is for the blue LED's.

    Is this any good? My friend done all the soldering and I was just learning as he went along. (I have to learn somewhere right?)
    Home Entertainment =Epson TW9400, Denon AVRX6300H, Panasonic DPUB450EBK 4K Ultra HD Blu-Ray and Monitor Audio Silver RX 7.0, Monitor Audio CT265IDC(x4) Dolby Atmos and XTZ 12.17 Sub - (Config 7.1.4)
    My System=Gigabyte X470 Aorus Gaming 7 Wi-Fi, AMD Ryzen 7 5800X3D, Patriot 32 GB DDR4 3200MHz, 1TB WD_Black SN770, 1TB Koxia nvme, MSI RTX4070Ti Gaming X TRIO, Enermax Supernova G6 850W, Lian LI Lancool 3, 2x QHD 27in Monitors. Denon AVR1700H & Wharfedale DX-2 5.1 Sound
    Home Server 2/HTPC - Ryzen 5 3600, Asus Strix B450, 16GB Ram, EVGA GT1030 SC, 2x 2TB Cruscial SSD, Corsair TX550, Plex Server & Nvidia Shield Pro 4K
    Diskstation/HTPC - Synology DS1821+ 16GB Ram - 10Gbe NIC with 45TB & Synology DS1821+ 8GB Ram - 10Gbe NIC with 14TB & Synology DS920+ 9TB
    Portable=Microsoft Surface Pro 4, Huawei M5 10" & HP Omen 15 laptop

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •