Hi all, this is my first overclock and read quite a few guides before embarking and did a number of stress tests on stock settings, which were fine.
I initially used the turbo mode the Asus P867Pro which set the base clock to 103 (which I turned down the 100) and set the multiplier to 45 (achieving 4.5ghz). This was fine and all stable for almost 2 hours on prime95 ā great I thought. However I thought Iād disable the PLL overvolt as I was getting quite low voltages with the CPU voltage set to auto ā this however caused the BSOD with Prime95, so going back into the bios I turned PLL back to auto. This, however still causes the BSOD and now everytime I test with Prime95 no matter how low the multiplier I seem to get a BSOD every 20 minutes or ā just wondered, could I have damaged my CPU somehow? As I did set the CPU voltage manually at first (1.35v) and got the BSOD in the Prime95 test at 4.5ghz.
I followed a number of detailed guides carefully, but wondered if a too low a voltage could have damaged the CPU somehow? Or is it simply a case I have missed something?
My temp are consistently good - low 60's max (62-63), so clearly not that.
Thanks