|SilentDeath|: Didn't know that was required... thanks :) They are tucked in warm as the vapos design with the PSU ;)
Printable View
|SilentDeath|: Didn't know that was required... thanks :) They are tucked in warm as the vapos design with the PSU ;)
Back to the subject.
I have made another waterblock today in work, and am feeling pretty proud of myself, piccy here............ http://www.guntha.btinternet.co.uk/waterblock.jpg only taken on my camera phone so exscuse quality.
I have ordered a new 120mm fan for my rad,
Also got a DD reservoir comming, some arctic silver, and a 1200L/Hr Eheim 1250 pump.
Any other sugestions?
Cant see picture? :(
try again :)Quote:
Originally Posted by Shogun
Looks good :)
haha!!!!! after a few hours of lapping the base etc, instaled the whole system now,
Getting temps (STOCK CLOCK) of 28 idle, and 31 under load
New pump comming tomorrow, so will clock it tomoorw night :)
Block looks nice, can i have one? :P Would contribute of course :P
Lapping's fun isnt it.
Going to have a go at another block next weekend. Just need some 5mm copper/lucite sheet to use a top.
GateKeeper
Cool temps! Now you need to overclock :p
Your block looks very nice. Did you mill the polycarbonate as well?
yes, all milled :), easier than filing way :)
cant wait to overclock this baby
Nah mate, with all the designing, milling filing, took me about 10 hours, can give you the design tho?Quote:
Originally Posted by Shogun
My tops made out of perspex, that do ya? got loads here, will post you a square if you cover p+pQuote:
Originally Posted by GAteKeeper
Its just the milling that i would have the problem with :(Quote:
Originally Posted by madocks
Ive got to mill my north bridge, once complete a very good mate of mine, ERU wants a north bridge and cpu block. If i Have time while im doing them I possibly can whack you a pair off.Quote:
Originally Posted by Shogun
However, thats a maybe, not a deffo.
Thanks alot mate :)Quote:
Originally Posted by madocks
I have some 6mm perspex that would do the job - I am not continced of its tensile strength for use as a hold down plate as well.
Cheers for the offer though.
GAteKeeper