Printable View
I've got Aero 7 Lite at the moment, my XP3000 is running at ludicrous temps. When it starts up its at 40c and the MB temp is 28c.....within a few mins of just browsing the net it escalates to 60c and the MB to 34c!
The most I've seen it go to is 64c, and I havent even bothered to run a game on it yet!
Anyone have an idea what might be wrong and how it can be fixed?
Are you sure that the heatsink is mounted on the CPU properly? It might be worth taking it off and reapplying the thermal paste, and making sure that the heatsink is on properly.
Also, if you take the side off your case, how much do the temperatures improve? If they go down a lot, then you would probably need a case with better ventilation.
Hope this helps
Mike
I very much doubt those are the real temps. Try updating to the latest BIOS for your board(which board is it by the way)Quote:
Originally Posted by twistedturq
Also try reseating the heatsink to see if it makes any difference and one more thing - are you using that crap thermal pad that comes on the bottom of the Aero7?
Possibly isn't set properly?
Which thermal paste/compound are you using?
What are your voltages?
Case cooling?
So many questions :)
As others have said, check HSF for proper seating, re-do the thermal paste with something decent such as Artic Ceramiqe \ Silver 5, download latest drivers for motherboard, take sides of case see if temps go down, and tell us what board you are using and if you are overclocking or not, and if so, what voltages you are using on the CPU.
Be specific.
Temp stays the same even when i take the sides off the case, and i got the latest BIOS update through the Asus Live Update.
I'd like to believe its just a fake readout as the system hasnt died on me at all when running over the weekend, but its kinda worrying
I only had a little bit of paste left when i was installing the HSF, so you reckon its worth buying and applying some more?
Which paste did you use?
the one that came with the HSF. Does it 'really' matter what kinda paste you use though?
Yes it does. Get some AS5 on there. Put a paper thin layer on the core first. Then put a tiny bit on the HS and smudge it in using some cotton wool and keep on rubbing it until it vanishes ( i think there should be ridges on the underside of the HS on that particular one) just like when you put some deep heat on :P
Then put it all together and make sure you've got the latest BIOS version as many of the fixes in the BIOS versions are temperatures
Interestingly when I took the side of my case off the temps went up ... how does that work?? :s
Have the side on your case and some system fans on creates a kinda wind tunnel taking cool air in and hot air out. If the side is off the hot air will stay in the case unless there is a breeze.
I have an aero 7 and i,m not very impressed with the proformance of it at all. You really shouldn't rub the AS5 on with cotton wool use a rubber glove ot just cover your finger in plastic. You would be better of with a new HS
what HSF would you recommend for an xp3200?
get an slk 900 or 948. I'm going to shamelessly plug sidewindercomputers.com again, but the have the ALX 800 there for 13.95(united states dollars) which is quite the bargain if you don't have a hardcore copper craving. If you do, the SLK 900-A is 28.95 and the SLK-948U is only 33.95. Make sure you buy a fan to go with the heatsink, get the Thermaltake Smart Fan II or the Vantec Tornado (or even a delta if you're deaf to begin with) if you want crazy amounts of air moving. You might do better, however, with a Panaflo high or medium speed for good cooling that's easier on the ears.
Good luck and happy shopping.
EDIT: Just to let you know, sidewindercomputers does ship globally, so no worries for you brits! :p
Yep I second that - have ordered lots of stuff from them over the past few years
make sure you havent got anything putting your CPU into load on start up, check what % of CPU is in use when just browsing it shouldnt be 100%
thought i'd give doom3 a go, to see if its just a mis-reading but an hour or so into the game the temp reached 75c! and started to glitch big-time!
Thankfully the CPU is just a replacement until my 3200XP is sent - so if it gets screwed i'm not bothered that much. But its still annoying and more worryingly my mobo temp hit 38c!
applied some AS5 and left my case open and the CPU temp has dropped to 52c! and the motherboard has droped to 33c.
Which is quite a drop, but im still not happy with the temp. Im now starting to think its just me shoddy case. Reckon if I add the following it will drop a lot more?
A PCI exhaust blower (gonna sit right underneath my 9800xt)
An 8cm system fan (dont have any in there at the mo - but I'm not overclocking anything so i didnt think I'd need one really)
and one of these http://www.titan-cd.com/english/prod...el_no=TTC-SC04
Note, all are freebies anyway, so i wont be 'wasting' any money as such, but what do you guys think?