Results 1 to 10 of 10

Thread: SN45G power issues?

  1. #1
    Senior Member
    Join Date
    Jul 2003
    Location
    Whitley Bay, UK
    Posts
    254
    Thanks
    0
    Thanked
    1 time in 1 post

    SN45G power issues?

    Hi all,

    Been reading Hexus for a while and decided to buy a shuttle but have a question....

    Do Shuttles (SN45G in particular) have any power issues?

    I ask as I'm having a bugger of a problem. When I play a game (America Army) after about 2 mins the PC shuts off and I can see a red LED turns on inside the case. It runs fine otherwise though.

    My spec is SN45G, XP2500, 256 PC3200 RAM (ebuyers own make), 40 gig HD, GF4ti4200, DVD ROM.

    I know that alot of people mention memory, but the whole thing is fine under Windows (oh I run 2k SP3 btw).

    The only other thing I can think of is a heat thing. My CPU runs at approx 52 degC (or so my bios tells me) but I know that XP chips and the bios for example should be fine at these temps.

    Any help would be greatly appreciated!

  2. #2
    Registered+
    Join Date
    Sep 2003
    Location
    Portsmouth
    Posts
    16
    Thanks
    0
    Thanked
    0 times in 0 posts
    I think that red led is indicating overheating. same thing happened to me yesterday when I was setting up my sn45g, and I forgot to plug in the CPU fan :/

  3. #3
    Senior Member
    Join Date
    Jul 2003
    Location
    Whitley Bay, UK
    Posts
    254
    Thanks
    0
    Thanked
    1 time in 1 post
    Yeah, took the cover off and it says CPU overheat. In the bios it has settings for different temps and even mentions 60, yet ny CPU was only around 52. Left the cover off and it was fine. I'll try again!!!

  4. #4
    Gordy Gordy's Avatar
    Join Date
    Jul 2003
    Location
    Bristol
    Posts
    3,805
    Thanks
    63
    Thanked
    72 times in 50 posts
    It really shouldnt be overheating with those specs I would suspect that cooler isnt seated correctly or that it has too much/too little Thermal Compound

  5. #5
    HEXUS.Metal Knoxville's Avatar
    Join Date
    Jul 2003
    Location
    Down In A Hole
    Posts
    9,388
    Thanks
    484
    Thanked
    442 times in 255 posts
    • Knoxville's system
      • Motherboard:
      • Intel X58
      • CPU:
      • Intel i7 920
      • Memory:
      • 2GB DDR3
      • Storage:
      • 1TB
      • Graphics card(s):
      • ATi HD3450
      • PSU:
      • Generic
      • Case:
      • Cheap and nasty
      • Operating System:
      • Vista 64
      • Monitor(s):
      • 24" LG LCD
      • Internet:
      • Virgin Media 20mb
    Have you got the shim on or off?

    you can get slightly better temps with it off in my experience

  6. #6
    Registered User
    Join Date
    Sep 2003
    Location
    South Yorkshire
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    Yeh i runn a simular spec and i got the warning light after a few mins play i just removed the Ice system and the crappy thermal compound that was on it and replaced it with Artic silver. Chucked the default shuttle shim and replaced it with a none metallic shim than mounted the Ice system very tight and now i run at 50 degree C underload.

  7. #7
    Senior Member
    Join Date
    Jul 2003
    Location
    Whitley Bay, UK
    Posts
    254
    Thanks
    0
    Thanked
    1 time in 1 post
    Ok, I'll remove the shim today and use some Coolermaster thermal paste I've got. I'll post my findings later today.

    Thanks for the replies.

  8. #8
    Senior Member
    Join Date
    Jul 2003
    Location
    Whitley Bay, UK
    Posts
    254
    Thanks
    0
    Thanked
    1 time in 1 post
    Ok then......took shim off and applied Coolermaster thermal paste instead of the Shuttles own thermal goop and all seems fine. Played games for a few hours and no reset issues. Cool!!!

  9. #9
    Registered User
    Join Date
    Sep 2004
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts
    Had the same problem with one of my three sn45g shuttles. Replaced the paste with artic silver on all computers. Termperature dropped 5 degrees.

    I also left the fan lead unplugged onto when reassembling a shuttle. It really heated up quickly and the red led went on.

  10. #10
    I'm just looking Tifosi's Avatar
    Join Date
    Feb 2004
    Location
    127.0.0.1
    Posts
    843
    Thanks
    8
    Thanked
    5 times in 4 posts
    • Tifosi's system
      • Motherboard:
      • DFI LanParty UT nF4 SLI-DR
      • CPU:
      • AMD64 Venice 3200 s939
      • Memory:
      • 2x 1GB DDR400 Corsair XMS
      • Storage:
      • OCZ Vertex 2.5" 64GB SSD
      • Graphics card(s):
      • Geforce G210T / Geforce 7800GT
      • PSU:
      • ?
      • Case:
      • Lian Li PC-V1110
      • Operating System:
      • Ubuntu 12.04
      • Monitor(s):
      • Dell 2405FPW
      • Internet:
      • VM
    Did you take the plastic film off the shim? quite a few people miss it!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •