Im currently running a XP2500 200x9 @1.65v with a ATI 9800 AIW and Im getting CPU 40-45'c and case 39-43'c
what are you lot getting with your different rigs.
Printable View
Im currently running a XP2500 200x9 @1.65v with a ATI 9800 AIW and Im getting CPU 40-45'c and case 39-43'c
what are you lot getting with your different rigs.
SN45G
XP2500+ @ 200x11 with a 9500pro.
CPU 33/39 case 36/38
Oh, and its watercooled :)
GFX going to be WC tomorrow afternoon
forgot to mention Ive also a SN45G
Idle temps -> http://www.g0rd.com/Images/LCD.jpg
hmmm my cpu is idle at 54 :D and system temps of 48 :D - my nb has blown though! i have also upped the fsb to 185 in my sn41g2. just about to order a new fan how do you guys rate this
http://www.thecoolingshop.com/produc...products_id/33
or shall i get the Zalman ZM-NB47J Northbridge ?
SN45G
2500XP+ Mobile (at stock)
NoiseBlocker S2 @ low
49Idle
54Full
SN41G2
Specs as sig.
Case temps 38-40. CPU 50-55, depending on ambient temps.
Got 2 of them 40mm 3pin fans here could have had one from meQuote:
Originally Posted by Bobby Sixkiller
Shuttle SN45G w/xp2700 @ 2.31ghz watercooled
Idle - 44
Load - 47/49 (Depending on room temperature)
got my new NB heatsink and sorted out my cpu seating down to about 48c idle on the cpu and 35 system temp... not bad i guess
That's really effective I only expected to see a 3-4c drop!Quote:
Originally Posted by Bobby Sixkiller
Did you use Artic Silver 5 or 3 thermal paste? that would probably have help a few c's
no just the stuff that came with it, maybe the reseating of the cpu helped too, and remember i had no nb heatsink
i also think that if you have a good gcard and your noise is mild anyway then why not replace the default ice fan and have it running all the time on low, you can hardly here it, infact all i can here is my geforce fx5600 :D my system temps are lower now
Not really a Shuttle its a Soltek EQ3702.
AMD 2500+ undervolted to 1.5v
Radeon 9600XT passive cooled
48-55C CPU
39-43C SYS
I use speedfan to regulate the fans.
Opposed to what? not running it all the time or running it all the time on high? the former is scary.Quote:
Originally Posted by Bobby Sixkiller
I run mine all the time on full since I find the fan changing speed and sound, more irritating than a constant drone.
My old 9800pro hercules was so noisy I couldn't hear it that well anyway, however my new sapphire 9800pro is so quiet in comparison - v. odd.
Quote:
Originally Posted by Atcapollo
Opposed to it coming on and off as and when it is needed numb nuts
now can i have your old 9800pro hercules? :D