Printable View
I was just wondering?
How fast is your Hard Drive what is the transfer speed.
Do you have 133 IDE or SATA 150.
Do you have IDE raid or SATA raid.
Do you have Raptors or any other kind of HD.
I found this little program that measures Data transfer speeds.
HD Speed http://img.photobucket.com/albums/v4...NewPicture.bmp
It would be interesting to see the speeds of various HD setups
The program is at
http://www.steelbytes.com/
under Disk Utils
My speed was 112- 116 Mps
60MB/s on my RAID 5 array (Three Barracuda SATA's)
Not exactly great... thanks to a sucky PCI bus and creative sound card. :(
Hello.
I have 2x 160gig SATA maxtors in raid 0 :rockon:
http://www.robertpeck.demon.co.uk/hddspeed.jpg
And as you can see it looks like my speed is very simular to yours.
My shuttle is a SN45G with an 60gig Maxtor and is average 37.4MB/s and peaks at 40MB/s
My laptop is a P4 2.4, 30gig Toshiba drive.
Specs of my laptop drive:
Device Type: Laptop Hard Drive
Form Factor: Internal
Interface Type: DMA/ATA-100 (Ultra)
Storage Capacity: 30GB
Data Transfer Rate: 100MB
Spindle Speed: 4200
Average Seek Time: 12ms
Buffer: 2MB
Environments: PC
The laptop peaks at around 22MB/s :(
Something to compare with there :)
Cheers this is great
Mine are two raptors raid 0.. but due to the drivers I was unable to use them on my Intel chip... So there threw the PCI buss instead! :rant: I think the raid is being limited by the buss...
http://img68.exs.cx/img68/6563/Untitled-1copy60.jpg
by the way... We used different block sizes! This could efect the results!
And this is a Seagate 160 gig sata ON THE INTEL CHIP!!!
http://img53.exs.cx/img53/5442/Untitled-1copy58.jpg
Theres some thing wrong here! :crazy:
I'm going to be buying a maxto 120 Gig drive. Should be nice and speedy then :rockon:.
Averageing around 100MB/s read on my two WD Caviar 80GB in RAID 0.
Will post screen shots when I have time to let the test run properly :).
What do you mean by properly? I noticed theres a position percent...Quote:
Originally Posted by turkster
Well yeah let it run 100% (I presume this means head position) and run it with all antivirus, firewall, samurize etc stopped.Quote:
Originally Posted by myth
Any hard drive activity by other programs dramatically reduces the benchmark scores. Not surprising really.
humm.. you mean boot in safe mode! :p Or kill Explorer!Quote:
Originally Posted by turkster
pmsl its not even worth submitting the scores untill u run the test 100%
as its only running small blocks to start with
for the first 20% i was at about 120mb/s but when it hit 50% the score started to drop quite rapidly and think it finished between 90mb/s and 95mb/s. lowest average being around 88mb/s and the actual speed dropping to 80mb/s in some places.
and thats for 2xraptors in raid0 with an 4m block which is a poor size for benching as it doesnt handle large files particularly well.
HD tach 3.0 is good for benching as u can also test burst and write times without destroying hdd data lol