I have watercooled for short period at a time beore; but this will be my first day to day water cooled system, so some advice would be good.
I have the following; but wanted peoples Input on ze watercooling side; making sure it should all fit together etc.
I do plan in the future to add a second rad and GPU blocks.
CPU: Intel 5930k
Mobo: Rampage V Extreme X99
Ram: 32GB TeamGroup Elite DDR4-2400
GPUs: R9 290 till AMD 300 Series comes out
PSU: Spare Corsair 850W
SSD: Spare 480GB Crucial SSD
HDDs: 2x Seagate 3TBs and 2x HGST 4TBs
Now for the cooling:
CPU Block: EK Water Blocks EK-Supremacy EVO - Full Nickel (Original CSQ)
Radiator: XSPC RX480 Quad Fan Radiator V3
Pump: XSPC D5 Vario (Body + Screwring)
Reservoir: PrimoChill 360mm AGB CTR System Phase II - Red
Tubing: Primochill Primoflex Advanced Tubing 19/13 - Red - 5m.
Barbs: XSPC G1/4" to 1/2" Barb Fitting (Black Chrome)
Compression Fittings: EK Water Blocks EK-ACF Fitting 13/19mm - Red
Additional Bits (from Stores / Ordered)
5L Distilled Water
Hose Cutters
Mayhem Silver Kill Coils *4
So any body got any thoughts/can see anything I have missed?
I am also not entirely sure if that rad is actually decent or if I am better off getting an xspc photon 270 with the pump attached. The one thing that puts me off that is the fact is isnt coloured .
Though I was tempted to get: https://www.overclockers.co.uk/showp...41&subcat=2142
But in the past have heard issues with Bay Reservoirs.