Printable View
hello i need some help.
this is my first watercooling build and i have all of the parts my monsoon chaingun fittings won't fit on my gpu block, the first part screws in fine but the top part will not screw on as the gpu board is in the way. I can post pictures if that will help.
post pics.
http://postimg.org/image/hbngph9gr/
it just that fitting near the pcb on both gpu's all the other 10 fit fine on pump,rad,cpu block and the other side of the graphics card
http://postimg.org/image/hbngph9gr/
http://postimg.org/image/821in2iop/
http://postimg.org/image/l3c2ae8wj/
i dont think the image above worked
as you can see by them pictures they fit fine on the cpu block and the other side of the gpu, its just they get stuck on the pcb of the gpu.
what shall i do as i dont want to pay out for a whole set of different fitting but i may ot have a choice as i dont want it to look odd.
well it depends on the thread length, EK blocks do not allow for long threads so in that case a spacer will work fine, failing that an extension.
This http://shop.ekwb.com/ek-extender-g1-4-socket-black
product pages for both options
http://shop.ekwb.com/fittings/extend...c-extender?p=3
http://shop.ekwb.com/fittings/extend...pacers/spacers
stick with EK and you know it will work.
( I think you will need a static extender tbh)
Next time you plan a project google if the fittings will work with the blocks ;)
your a life saver why didn't i think of that. also what is the part i need to put between the 2 graphics cards? i was going to use tubing but iv'e seen builds with fittings between them.
most EK blocks allow the end fittings to be removed to replace with a connectivity block if you want the full bling, doubt you would need spacers then http://shop.ekwb.com/water-blocks/vg...nnectivity?p=3
otherwise pick the correct size extender(s) from the above links
How did you get on?