Did my OC cause this?

Notice it says no CPU! :eek: I had uped the bus to 233 and the voltage by 6.0% I was running 3Dmark 05, the gpu test just finished and the cpu rendering begain when my PC gave me a BSD! When I rebooted I got this...

Code:

---

Event Type:        Warning
Event Source:        WMIxWDM
Event Category:        None
Event ID:        106
Date:                4/4/2005
Time:                12:10:32 AM
User:                N/A
Computer:        MYTH-6YEWH0HZBR
Description:
Machine Check Event reported is a corrected error.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

---

http://img19.exs.cx/img19/230/untitled18ll.gif

I am now afraid to atempt that OC again... Any ideas? Did the cpu crap out?

why dont you try resetting the bios? theres usually a jumper u can reset it to defaults with, or if it doesnt, try removing the button battery for 10secs. Hope this helps

http://img133.exs.cx/img133/8959/helpme1pi.th.gif

ok look at the times this is hapening! wtf???? Can some one smarter then me figure this out? The OS is 64 bit XP Pro RC2

Seems like a WMI error to me. Have you checked the KB?

What CPU is it?

3500+ winchester.

Does it happen at stock and on Win XP 32bit SP2?

Why the hell would he want to overclock a 3500+ Winchester?

What the hell can it not run?

Sounds a bit damn stupid to me......

Quote:

---

Originally Posted by Firelord

3500+ winchester.

Does it happen at stock and on Win XP 32bit SP2?

---

nope and it didnt when it was OC'ed either... The odd thing is it dont bsd when I'm not gaming, I just get an error :crazy: and look at the times of the errors! :crazy: evry one minute at 33 seconds!

Quote:

---

Originally Posted by Firelord

Seems like a WMI error to me. Have you checked the KB?

---

:inquisiti Say what???

Check the Microsoft Knowledge Base :) WMI = Windows Management Information

Why not overclock a 3500? Doesn't seem stupid to me!

Why not get more for free?

64bit xp?! beta version?

go to microsofts website and search for wmi wmd! wmi shouldn't be running anyway!

wmi=windows management intrumentation
wdm = windows driver mode
mca = machine check architecture.

might be useful to get that developement tool from MS, and see wht the errors are

Types of MCA Events

All MCA events fall within two categories based on the hardware reporting mechanism used. These are described in the SAL 3.0 Specification as follows:
•

CPU errors. Errors that either occur within components of the CPU itself, such as the caches, or that are detected on the CPU front side bus (FSB) during an external transaction.
•

Platform errors. Errors that are delivered to the CPU through external pins that are provided for reporting MCA events. Further detail on these pins is provided in section four of the SAL 3.0 Specification.

Any hardware error event that does not fall within these two categories is not delivered or processed as an MCA event. There is some flexibility in this model. System designers can connect hardware error event signals to the pins provided on the CPU to ensure that the errors are processed as MCA events. However, an MCA event must successfully identify the component that failed, or the component that is likely to fail in the future. For peripherals on an I/O bus such as peripheral connect interface (PCI), there is no standardized direct link from peripheral devices to the system chipset that could be used to raise an MCA event that identifies the failing component. MCA does provide full error handling for the standard PCI fatal error types such as PERR and SERR.
Severity Categories

MCA events can be further categorized based on the severity of the error. Each error delivered to the operating system falls within one of the following categories:
•

Non-corrected or fatal errors. Errors that could lead to non-recoverable data loss or corruption. This type of error will cause the system to be restarted. Examples might be a parity error on the PCI bus or a double-bit error correction code (ECC) error in system memory.

Note: Non-corrected or fatal errors are referred to as machine check abort (MCA) events. This term causes confusion with Machine Check Architecture (MCA). In this paper, MCA always refers to Machine Check Architecture.
•

Corrected errors. Errors that can be corrected either by the hardware or by some level of software. The occurrence of a corrected error can indicate instability in the hardware and can be used to predict future fatal errors. The more sources of corrected errors within the system, the better the quality of the system’s error prediction. Examples of this type of error might be a double-bit ECC error in a clean cache block or a single-bit ECC error in system memory.

There are two types of corrected error:
•

A corrected machine check (CMC) error is a corrected error that was detected by the CPU.
•

A corrected platform error (CPE) is a corrected error that was detected by the platform hardware.

can u access the event log?

Quote:

---

Originally Posted by richard-wong

can u access the event log?

---

This? This is the cause...

http://img140.exs.cx/img140/5454/rt6iri8uq.th.gif

on the picture it had evetlog, can u click on that and tell me exactly what it said?

the warning generated is caused by a CPU corrected error. it means something has been corrupted in the cpu and it was corrected by the cpu, and thus the warning. the eventlog shud have further details as exactly what the problem was.

so simply put your over clocking did result the error, and i am basically trying to make sense of what the warning means. (microsfot is not very detailed about this, but you can try the help and support come with your windows and search for MCA warning etc and see if you can any further info)

Did you install an A64 driver on XP-64?

If you set the external clock to 233Mhz that is a 563Mhz overclock on the CPU, unless you used a lower multiplier and a 33Mhz OC on the memory, unless you used a ratio besides ddr400.

Give the CPU and memory more voltage or back off on the OC.

You should also lower HTT/LDT multiplier/ratio if you are overclocking. Stock is 1000MHz, or 5x, drop it to the 3x, or 4x multiplier (sometimes listed as 600 or 800Mhz).

All drivers are the latest 64 bit, and its not my OC... I'm at stock and its still doing it :mad:

I cant click that event log in the popup, it just disapearses :crazy:

Reformat and try again.

Oh yeah if APCI, ACPI, whatever, both of those things..If they ae disabled 64-bit windows XP useually won't work correctly. So, if you turned em off, turn em back on, before you reload windows.

Quote:

---

Originally Posted by oralpain

Reformat and try again.

Oh yeah if APCI, ACPI, whatever, both of those things..If they ae disabled 64-bit windows XP useually won't work correctly. So, if you turned em off, turn em back on, before you reload windows.

---

I'll just wait 2 weeks when the official windows 64 bit is released to the public ;)