Page 1 of 2 12 LastLast
Results 1 to 16 of 19

Thread: How can I tell if I'm overloading my PSU?

  1. #1
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts

    How can I tell if I'm overloading my PSU?

    I have a strange problem with my Audigy Platinum EX. The external box keeps stopping working. If I take the card out and switch the PC back on then power down again and then re-install the card all seems well.

    Then, a while later, I find it's stopped working again.

    Could I be overloading the PSU?

    I am running a Prescott 3.0Ghz, an ATI 9800Pro, a TV card and the sound card, along with 2 HDs and 2 optical drives (DVD re-writer and CD re-writer).

    Both the sound card and graphics card have power connected to them.

    What power would you recommend? I'm running a 350watt.

    Dave

  2. #2
    Senior Member
    Join Date
    Sep 2004
    Posts
    1,012
    Thanks
    6
    Thanked
    9 times in 9 posts
    I'm running a 350 Watt with a higher power system than that (6800GT, 3500+ Etc..)

    Unless its a no name PSU?

  3. #3
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts
    Thanks, I suppose that's good and bad news then!

    It's a good quality PSU (Cost about £45) so it looks like it could be a broken external box. I've replaced the actual sound card and get the same problem.

    Dave

  4. #4
    Senior Member
    Join Date
    Nov 2003
    Location
    Rule Britannia!!! (Unfortunately essex!)
    Posts
    1,222
    Thanks
    0
    Thanked
    0 times in 0 posts
    I wouldn't class a £45 PSU as good quality... its middle of the road.

    I would say that your system is underpowered and really you should be looking at least 400minimum and 450w recommended of a named brand (ie Tagan or OCZ)

    What make PSU is it and what amps does it have on the rails?
    .: Predator :.


    - Shuttle SN25P - A64 3700+ San Diego @ 2.7GHz - 1GB PQI Ultra DDR - X850XT - Asus DVD-ROM - 200GB Maxtor + 2*80GB SATAII -

  5. #5
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts
    I have a memory like a sieve but I think it's an Antec Silent. The PC is not easy to get at as it's used as an HCPC.

    Looks like I'll have to swap out the PSU next then.

    Thanks

    Dave

  6. #6
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts
    I have found the thread where I bought the PSU from and its a Antec TruePower 380 watt so it's just over 350w.

    Is there any software that can show what power the PSU is giving out?

    I'm more inclined to think that it's the Audigy external box that is at fault. If it was the PSU I would have thought that it would have failed immediately rather than running for a while before giving up the ghost.

    Dave

  7. #7
    HEXUS webmaster Steve's Avatar
    Join Date
    Nov 2003
    Posts
    14,283
    Thanks
    293
    Thanked
    841 times in 476 posts
    Get a program such as motherboard monitor or speed fan. If the voltage readings are low then the PSU may be struggling. For more accurate readings, use a multimeter.
    PHP Code:
    $s = new signature();
    $s->sarcasm()->intellect()->font('Courier New')->display(); 

  8. #8
    Senior Member
    Join Date
    Nov 2003
    Location
    Rule Britannia!!! (Unfortunately essex!)
    Posts
    1,222
    Thanks
    0
    Thanked
    0 times in 0 posts
    Quote Originally Posted by davejp
    I have found the thread where I bought the PSU from and its a Antec TruePower 380 watt so it's just over 350w.

    Is there any software that can show what power the PSU is giving out?

    I'm more inclined to think that it's the Audigy external box that is at fault. If it was the PSU I would have thought that it would have failed immediately rather than running for a while before giving up the ghost.

    Dave
    Not at all, I have had PSUs that appear to be fine BUT once loading them up they've just caved in and restart the system. You'll find that the PSU doesn't have the amps required to run a Prescott space heater, 9800 Pro, TV Card, Audigy (these suck a fair few amps, specially the plats) along with other devices such as HDDs
    .: Predator :.


    - Shuttle SN25P - A64 3700+ San Diego @ 2.7GHz - 1GB PQI Ultra DDR - X850XT - Asus DVD-ROM - 200GB Maxtor + 2*80GB SATAII -

  9. #9
    Nox
    Nox is offline
    Vorsprung durch Technik
    Join Date
    Oct 2003
    Location
    Hampshire
    Posts
    2,023
    Thanks
    2
    Thanked
    2 times in 2 posts
    • Nox's system
      • Motherboard:
      • Yes
      • CPU:
      • Yes
      • Memory:
      • Yes
      • Storage:
      • Yes
      • Graphics card(s):
      • Yes
      • PSU:
      • Yes
      • Case:
      • Yes
      • Monitor(s):
      • Yes
      • Internet:
      • Yes
    My good quality psu cost around £200! There are a couple of sites around that can calculate (roughly) the psu requirement for a system, just wish I could remember them... do you get the message up saying the exterrnal box isn't connected when its not working? or does it just 'not work' ?

    Nox

  10. #10
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts
    Thanks guys, I have checked speedfan and it gives the following:

    +12v = 11.86
    3.3v = 3.18
    Vcc = 4.85
    5Vsb = 4.93

    That's with the EX box disconnected. I'll re-connect tonight and take the readings again

    Dave

  11. #11
    Senior Member
    Join Date
    Oct 2004
    Location
    Essex and proud!
    Posts
    230
    Thanks
    0
    Thanked
    0 times in 0 posts
    Looks like your psu is definitely struggling. Get a more powerful one for sure.

  12. #12
    HEXUS webmaster Steve's Avatar
    Join Date
    Nov 2003
    Posts
    14,283
    Thanks
    293
    Thanked
    841 times in 476 posts
    Those figures are a bit low, so I'd say your PSU was having a hard time of it. I'm with marlyred.
    PHP Code:
    $s = new signature();
    $s->sarcasm()->intellect()->font('Courier New')->display(); 

  13. #13
    Now with added sobriety Rave's Avatar
    Join Date
    Jul 2003
    Location
    SE London
    Posts
    9,948
    Thanks
    501
    Thanked
    399 times in 255 posts
    They look fine to me, 11.86V on the 12V line is nothing to worry about even if it is accurate, which coming from MBM, it's not guaranteed to be. If connecting the breakout box causes a noticeable sag though, you'll know it's the culprit.

    I find a good way of telling whether a PSU is overloaded is to connect a loud 12V fan up to a spare molex, then put it next to your ear while you fire up CPU Burn (and/or 3DMark01). If it slows down appreciably then the PSU is stuggling.

  14. #14
    Nox
    Nox is offline
    Vorsprung durch Technik
    Join Date
    Oct 2003
    Location
    Hampshire
    Posts
    2,023
    Thanks
    2
    Thanked
    2 times in 2 posts
    • Nox's system
      • Motherboard:
      • Yes
      • CPU:
      • Yes
      • Memory:
      • Yes
      • Storage:
      • Yes
      • Graphics card(s):
      • Yes
      • PSU:
      • Yes
      • Case:
      • Yes
      • Monitor(s):
      • Yes
      • Internet:
      • Yes
    All of those voltages are lower than spec, but still within tolerances.

    try here, and see what you your rig is (VERY roughly) requiring:

    http://www.jscustompcs.com/power_supply/

    Then look at your psu. Remember a good brand 350w psu will likely be better than a 600w from an 'cheap' manufacturer.

    Nox

  15. #15
    Senior Member
    Join Date
    May 2005
    Posts
    300
    Thanks
    0
    Thanked
    0 times in 0 posts
    Quote Originally Posted by Nox
    All of those voltages are lower than spec, but still within tolerances.

    try here, and see what you your rig is (VERY roughly) requiring:

    http://www.jscustompcs.com/power_supply/

    Then look at your psu. Remember a good brand 350w psu will likely be better than a 600w from an 'cheap' manufacturer.

    Nox
    Thanks for the link, I have ticked a few boxes and it comes back with a figure of 360W!

    I have in my spares box a Jeantech JNP-500AP, which is a 500W. Details Here so the question is: Is this 500W cheap PSU better or worse than my existing one?

    TBH it's a lot of hard work to swap them over so I need to know if it will be worth while!

    Thanks again for all your advice guys

    Dave

  16. #16
    Nox
    Nox is offline
    Vorsprung durch Technik
    Join Date
    Oct 2003
    Location
    Hampshire
    Posts
    2,023
    Thanks
    2
    Thanked
    2 times in 2 posts
    • Nox's system
      • Motherboard:
      • Yes
      • CPU:
      • Yes
      • Memory:
      • Yes
      • Storage:
      • Yes
      • Graphics card(s):
      • Yes
      • PSU:
      • Yes
      • Case:
      • Yes
      • Monitor(s):
      • Yes
      • Internet:
      • Yes
    Quote Originally Posted by davejp
    Here[/URL] so the question is: Is this 500W cheap PSU better or worse than my existing one?
    Luck of the draw mate see if you can find reviews that stress test em both, I would trust (as example) an enermax 350w to power a system requiring 350w, but some with some manufacturers 350w is the max SAFE load, any higher and they are up in flames!!!

    There is a lot of good advice on PSU's on these forums, particularly brands, I think scan were doing a rebadged enermax at one point (quality and cheapish) but i don't recal the exact name - its far too early! This was a while ago though, so i don't know if they still stock them.

    Nox

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Silverstone 0dB Fanless PSU
    By Carvahlo in forum Reader Reviews
    Replies: 6
    Last Post: 21-10-2004, 09:12 AM
  2. PSU recommendations
    By Alkan in forum PC Hardware and Components
    Replies: 29
    Last Post: 18-06-2004, 12:11 AM
  3. Noisy PSU
    By ajbrun in forum PC Hardware and Components
    Replies: 10
    Last Post: 04-06-2004, 12:44 PM
  4. PSU Mod
    By r1zeek in forum Chassis and Mods
    Replies: 13
    Last Post: 15-02-2004, 07:40 PM
  5. overloading psu? need help
    By pharmakon in forum PC Hardware and Components
    Replies: 1
    Last Post: 13-10-2003, 08:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •