Page 1 of 2 12 LastLast
Results 1 to 16 of 21

Thread: new system help shuts down :S

  1. #1
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts

    new system help shuts down :S

    ive just built a new pc its a
    3700 a64 san
    asus a8n pre
    1024 corsair value ram
    xfx 6800gt 256mb gpu
    hiper 580 watt psu

    it shuts down by its self when in hl2 and 3dmark and once or twice on its own at idle
    ive tired formating, bio's updates, clearing the bios, a new psu, different ram, and it still does it im tottaly out of ideas

    help plz

    thanks mike
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  2. #2
    Senior Member
    Join Date
    Apr 2005
    Location
    Manchester
    Posts
    394
    Thanks
    10
    Thanked
    9 times in 9 posts
    • dodgybob's system
      • Motherboard:
      • A8N-SLI Premium
      • CPU:
      • Opteron 170 @ 2.7 Ghz
      • Memory:
      • 2x 1GB OCZ Platinum Rev 2
      • Storage:
      • 1x 320GB WD & 1x 1TB Samsung F1
      • Graphics card(s):
      • X1950pro
      • PSU:
      • 500W Seasonic S12-II
      • Case:
      • P182B
      • Operating System:
      • Windows 7 Home Premium
      • Monitor(s):
      • Samsung SM 2443BW
      • Internet:
      • 8 Mbit
    Overheating perhaps, what are your temperatures like?

  3. #3
    Ah, Mrs. Peel! mike_w's Avatar
    Join Date
    Oct 2003
    Location
    Hertfordshire, England
    Posts
    3,326
    Thanks
    3
    Thanked
    9 times in 7 posts
    You could try reseating the heatsink and making sure that the thermal paste is providing good contact.
    "Well, there was your Uncle Tiberius who died wrapped in cabbage leaves but we assumed that was a freak accident."

  4. #4
    Senior Member sawyen's Avatar
    Join Date
    May 2005
    Location
    Sheffield University
    Posts
    3,658
    Thanks
    7
    Thanked
    22 times in 21 posts
    • sawyen's system
      • Motherboard:
      • MSI Laptop motherboard
      • CPU:
      • Intel Core i7 740QM
      • Memory:
      • 8192MB DDR3
      • Storage:
      • 256GB SSD, 1TB WD
      • Graphics card(s):
      • AMD Mobility HD 5870
      • PSU:
      • MSI stuff
      • Case:
      • N/A
      • Operating System:
      • Win 7 64bit
      • Internet:
      • Virgin ADSL rubbish
    sounds like a classic thermal problem to me... OS is refusing to operate with faulty readings.. or u just really screwed up that HSF position..
    Me want Ultrabook


  5. #5
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    cpu temp idle : 37
    cpu temp load: 42
    gpu idle : 50
    gpu load : 61
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  6. #6
    Senior Member sawyen's Avatar
    Join Date
    May 2005
    Location
    Sheffield University
    Posts
    3,658
    Thanks
    7
    Thanked
    22 times in 21 posts
    • sawyen's system
      • Motherboard:
      • MSI Laptop motherboard
      • CPU:
      • Intel Core i7 740QM
      • Memory:
      • 8192MB DDR3
      • Storage:
      • 256GB SSD, 1TB WD
      • Graphics card(s):
      • AMD Mobility HD 5870
      • PSU:
      • MSI stuff
      • Case:
      • N/A
      • Operating System:
      • Win 7 64bit
      • Internet:
      • Virgin ADSL rubbish
    OS problem then.. but just to be safe.. get a new rev and flash that BIOS as well... then format and reinstall XP.. should fix the problem..
    Me want Ultrabook


  7. #7
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    already done that
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  8. #8
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    it seems to work fine in normal browsing and stuff but the minuite i use anythign that needs decent graphics it shuts dowen after less then 15 mins
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  9. #9
    Senior Member
    Join Date
    Aug 2005
    Location
    Norwich
    Posts
    247
    Thanks
    1
    Thanked
    1 time in 1 post
    how are you getting thsoe tempratures? on board monitors?

    check the temps with an actual thermal probe, sounds like overheating to me.

    may also be a graphics card problem, as it has erors when going into 3D...got a spare gfx card lying around? try ti out.

  10. #10
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    i dotn ahve another gpu atm to try
    the temps seem about accurate the temp probe says readings within 10 degrees
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  11. #11
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    im thinkin about gettin the gpu exchanged
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  12. #12
    Ah, Mrs. Peel! mike_w's Avatar
    Join Date
    Oct 2003
    Location
    Hertfordshire, England
    Posts
    3,326
    Thanks
    3
    Thanked
    9 times in 7 posts
    Try different graphics drivers?
    "Well, there was your Uncle Tiberius who died wrapped in cabbage leaves but we assumed that was a freak accident."

  13. #13
    Senior Member
    Join Date
    Apr 2005
    Location
    Manchester
    Posts
    394
    Thanks
    10
    Thanked
    9 times in 9 posts
    • dodgybob's system
      • Motherboard:
      • A8N-SLI Premium
      • CPU:
      • Opteron 170 @ 2.7 Ghz
      • Memory:
      • 2x 1GB OCZ Platinum Rev 2
      • Storage:
      • 1x 320GB WD & 1x 1TB Samsung F1
      • Graphics card(s):
      • X1950pro
      • PSU:
      • 500W Seasonic S12-II
      • Case:
      • P182B
      • Operating System:
      • Windows 7 Home Premium
      • Monitor(s):
      • Samsung SM 2443BW
      • Internet:
      • 8 Mbit
    Hmm could you try underclocking the gpu? Perhaps if it is stable with the gpu underclocked then you could get an rma going.

  14. #14
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    yup tried new and older drivers
    i'll try underclocking it
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  15. #15
    Senior Member ifyouknowme's Avatar
    Join Date
    Apr 2005
    Location
    cornwall
    Posts
    512
    Thanks
    0
    Thanked
    0 times in 0 posts
    what gpu temp would cause my system to shut down ?
    dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
    ifyouknowme also know as HEXUS|Mrbeef

  16. #16
    Senior Member sawyen's Avatar
    Join Date
    May 2005
    Location
    Sheffield University
    Posts
    3,658
    Thanks
    7
    Thanked
    22 times in 21 posts
    • sawyen's system
      • Motherboard:
      • MSI Laptop motherboard
      • CPU:
      • Intel Core i7 740QM
      • Memory:
      • 8192MB DDR3
      • Storage:
      • 256GB SSD, 1TB WD
      • Graphics card(s):
      • AMD Mobility HD 5870
      • PSU:
      • MSI stuff
      • Case:
      • N/A
      • Operating System:
      • Win 7 64bit
      • Internet:
      • Virgin ADSL rubbish
    100C+... 6800GTs only shuts down when it exceeds its thermal envelope around 100C+
    Me want Ultrabook


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mid-spec system - comments please
    By Taz in forum PC Hardware and Components
    Replies: 25
    Last Post: 23-12-2005, 01:05 AM
  2. Abit NF7-S revision 2 information
    By Lee H in forum SCAN.care@HEXUS
    Replies: 22
    Last Post: 30-10-2004, 07:13 PM
  3. Keeping your system healthy and secure
    By Paul Adams in forum Software
    Replies: 6
    Last Post: 12-10-2004, 09:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •