Fan Headers

[evildoc614]

Ok here is a question for you guys.. i have a SN45G the ice fan plugs into header 1 ( i believe, cant check iam at work) then there are fan 2 & 3... there isnt anyother fans to plug them into so iam assuming that they are if i decide to add more fans. Question 2 the cpu overheat led: my temps are fine 44-47c idle and 52c load but the led stays on. the plastic is off the shim i hooked up right. I have been told that it takes 200+ hours for thermal paste to start settleling in and work effeciently. The computer isnt crashing i have been running it for 2 days str8. My system spec are in my sig.. Dont laugh at my video care either!!! thanks for the help

[d_fresh1]

- there are 3 fan headers...look in ur manual to find them, dummy
- temps are little bit high, what termal paste are u using? i dont use a shim...surpose to be better without it...but if u dont knw wot ur doing u could crack ur cpu

[5lab]

temps are fine

[micovwar]

those temps are average for an athlon shuttle,nothing to worry about,the fact that u have no other fans is becouse of the model shuttle u have,sn45g has no onboard graffics etc so it doesnt require a chipset/northbridge fan whereas the sn41g2 4 example does need 1 becouse of its built in gf4 gpu!

[d_fresh1]

gawd was i on crack

yeh i agree with both of them, the temps are fine...its jus i have a 120mm intake fan on my shuttle...so obviously its a little bit cooler

[evildoc614]

were did you put a 120mm fan? of the side? i would love to see this... the air in my house is so cold i would love to have a intake fan blowing some cool air into the case..