Results 1 to 14 of 14

Thread: PSU quiet mod

  1. #1
    Get to da choppa Million's Avatar
    Join Date
    Oct 2005
    Location
    Cardiff
    Posts
    1,040
    Thanks
    72
    Thanked
    17 times in 16 posts
    • Million's system
      • Motherboard:
      • Asus P5G41T-M LX2/GB/SI LGA775 mATX
      • CPU:
      • Core2 Quad Q6600
      • Memory:
      • 6Gb Corsair DDR3
      • Storage:
      • 256Gb OCZ Octane SSD, 3Tb Seagate HDD, 250Gb Samsung HDD
      • Graphics card(s):
      • HD4850 1Gb
      • PSU:
      • xClio 700w
      • Case:
      • Fractal Design Arc Mini (watercooled)
      • Operating System:
      • Windows 7
      • Monitor(s):
      • LG 36" LED TV
      • Internet:
      • Virgin 60mb cable

    Question PSU quiet mod

    Hey there,
    I'm on a quest to quieten my PC, and have decided that my PSU is making the most noise of all my components. It's an Enermax EG375AX-VE Noisetaker 370w. I'm contemplating opening it up and changing the fans for <25Db ones, but i've never opened a PSU before and have always been wary of it due to the dire warnings on them - is it really that dangerous to it's health? Can't I just unplug the current fans and replace them in the same sockets with silent ones or will it kill the whole thing? Any advice much appreciated

  2. #2
    lazy student nvening's Avatar
    Join Date
    Jan 2005
    Location
    London
    Posts
    4,656
    Thanks
    196
    Thanked
    31 times in 30 posts
    Unless you are qualifyed electricion i would NOT do it. Even after disconnecting the PSU holds ALOT of charge (enough to kill you)
    (\__/)
    (='.'=)
    (")_(")

  3. #3
    Senior Member Max Tractor's Avatar
    Join Date
    Jan 2006
    Posts
    1,248
    Thanks
    44
    Thanked
    41 times in 38 posts
    • Max Tractor's system
      • Motherboard:
      • Biostar TA890GXE
      • CPU:
      • 95w 1055T@x4-3.5Ghz-1.15v
      • Memory:
      • Samsung Green 30nm low voltage 2x4GB@1.26v
      • Storage:
      • Corsair 3 60GB-Sandisk Extreme 240GB
      • Graphics card(s):
      • 7850 2GB
      • PSU:
      • Seasonic SS-1050XM
      • Case:
      • Coolermaster elite 120(Modd)
      • Monitor(s):
      • BenQ EW2430
    Extremely dangerous, they can hold power for a long time, one slip and you will be spark out on the floor for a few hours, if you re lucky.

  4. #4
    Senior Member JPreston's Avatar
    Join Date
    Nov 2005
    Posts
    1,667
    Thanks
    5
    Thanked
    124 times in 74 posts
    Sensible warnings but I believe if you disconnect the PSU and leave it plugged in but switched off at the wall for a few days before opening it all the capacitors will have discharged. Not that I've modified a PSU myself but I've fixed the electrics in my washing machine following that principle and that's something like 1300W

    I don't know about that specific PSU but the reason it's loud could be because the fan is not temperature controlled, or it's inefficient and so needs more cooling than you might expect. If you swap the fan for 'quiet' one then either of the following scenarios would result:

    1. It is of the variety with a built in resistor/thermistor that causes it to spin slowly and shift less air. You PSU could overheat and pop.

    2. It does not throttle the voltage but is quiet on the basis of having high quality bearings - but the controller in the PSU will then spin it at exactly the same speed as before creating as much air (if not bearing) noise.

    So you will either:

    a) Electrocute yourself (most likely destroying the PSU too)
    b) Cause your PSU to overheat and fail.
    c) Not achieve a noticeable reduction in noise
    d) Be fine and delighted with the results.

    I'd just buy a new PSU if I were you!!!

  5. #5
    HEXUS.bouncer Jonny's Avatar
    Join Date
    Apr 2005
    Location
    Gainsville, Rock City Uni: Newcastle
    Posts
    1,489
    Thanks
    0
    Thanked
    0 times in 0 posts
    I've opened up a PSU to change the fans before, and found three things;
    1) I didn't die (though I was probably lucky)
    2) The fan was odd dimensions (like 78mm ish), so a new one would require some filing.
    3) It was not one you could just unplug, you would have to rip out the old fan wires and solder the new ones in.

    So, IMHO, it's not worth it.

    Though it could all be different for your own PSU.
    Last edited by Jonny; 14-01-2006 at 06:48 PM.

  6. #6
    Registered User
    Join Date
    Jul 2005
    Location
    Somewhere I Belong
    Posts
    445
    Thanks
    0
    Thanked
    0 times in 0 posts
    I didn't realise that PSU's held charge for that long. I could've killed myself at work a few months ago. I swapped a fan over as it stopped spinning. Think I'll make a mental note of that, not going to do it anymore, think my life is worth a little more than &#163;20!!

  7. #7
    Senior Member
    Join Date
    Jul 2005
    Location
    Birmingham
    Posts
    3,050
    Thanks
    248
    Thanked
    33 times in 31 posts
    • amjedm's system
      • Motherboard:
      • Asus A8N-Sli Premium
      • CPU:
      • Athlon X2 4200 S939 + Scythe Ninja rev A
      • Memory:
      • 2GB Corsair DDR PC3200
      • Storage:
      • Samsung T 160GB Sata in Scythe Quiet Box
      • Graphics card(s):
      • Nvidia 6600 256MB + Cooling Mod
      • PSU:
      • Enermax Noisetaker 485 (fanless) - lower chamber P180 fan doing the PSU cooling
      • Case:
      • P180 (modded - easier cable routing, front and rear grills cut)
      • Operating System:
      • XP Pro
      • Monitor(s):
      • LG 22" WTQ?
      • Internet:
      • O2 8MB (Standard)
    I've modded a few psu's and fortunately Thank God I'm still ok.

    To discharge

    I remove the psu from case (this is very important )
    Bend a paper clip and put ends into the pins connecting black and green wires
    Switch psu on the back (making sure it's not connected to mains)

    I've stuck with the above, although some people recommend unplugging from the mains and then switching off and on the button on the back of the psu.

    Forton's I've modded have been hardwired. HEC psu haven't been hardwired.

    I broke the two pin connector in a Seasonic Tornado so now the fan is connected to a Fanmate 2 and running at reduced speed.

  8. #8
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts
    If you really want to open up the PSU, then get a good multimeter and measure the residual voltage across the large smoothing caps on the mains input side. Unplgging the PSU and pressing the PC on button will discharge the components (although there may be a bit left in the interference filter (if fitted) on the mains input). But ALWAYS, ALWAYS check first - don't leave it to chance. And if you don't understand any part of this post, DON'T DO IT! (And if you do - its at your own risk!)
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  9. #9
    Sexiest Hexus user? quite possibly Russ's Avatar
    Join Date
    Jul 2003
    Location
    North Norfolk
    Posts
    5,200
    Thanks
    11
    Thanked
    69 times in 44 posts
    • Russ's system
      • Motherboard:
      • Apple Logic Board
      • CPU:
      • Core i5 2.8GHZ 8MB Cache
      • Memory:
      • 2x2GB
      • Storage:
      • 1TB
      • Graphics card(s):
      • ATI 5750
      • Case:
      • iMac
      • Operating System:
      • Mac OS X Snow Leopard
      • Monitor(s):
      • 27" iMac
      • Internet:
      • 2mb(on a good day)
    i changed a fan in shuttle psu, was quite easy, and didnt die at all just be carefull
    Gamertag - Russonf (xbox and ps3)

  10. #10
    Member
    Join Date
    Jan 2005
    Posts
    121
    Thanks
    0
    Thanked
    0 times in 0 posts
    I'd probably just buy a new PSU. A good quality 350W-400W will cost between £25-£40

  11. #11
    Amateur photographer Hans Voralberg's Avatar
    Join Date
    Dec 2004
    Location
    Birmingham
    Posts
    1,889
    Thanks
    1
    Thanked
    11 times in 11 posts
    I changed many many fans, and opened countless number of PSU, and i'm still alive . Just do watever you know to discharge the PSU, and use as much insulation as possible, you shouldn't die anytime soon.
    Primary kit:
    Fuji S5 Pro - Nikkor AF 50/1.8 - Nikkor AF 85/1.8
    Epson RD-1

    Film Kit:
    Leica M3 - Summicron 50/2 DR - Zeiss ZM 25/2.8 - M-Rokkor 40/2

    Olympus OM2n - Zuiko 50/2 Macro - Zuiko 50/1.4 - Zuiko 35/2.8

  12. #12
    Are you Junglin' guy? jamin's Avatar
    Join Date
    Jul 2003
    Location
    Sunny Southend On Sea
    Posts
    921
    Thanks
    17
    Thanked
    11 times in 10 posts
    Capacitors are strange beasts, charge them up and they stay charged for days (maybe even weeks depending on type) Short them out and they appear discharcged, but they still hold a resudual charge! Be very careful! I have blown chunks out of a screwdriver on many occasions even after discharging a cap!

    I admit, theres not a great danger to your life, but there is a danger, a belt from a cap can leave you seeing stars for a while. My thumb swelled up to twice its size after a nasty belt of a cap! The real danger comes from screwing something up while you are modding the psu which MAY inadvetently live up your case with 230v AC, now that WILL kill you and anyone else who comes into contact with it! (Oh and it will fry your puter too!")

    My advice as an electronics engineer is to steer well clear of anything with "danger 230v" or "no user servicable parts inside" printed on them.

    I'm with Gfish, how much is your life worth!
    Beer is life, life is good!

  13. #13
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,978
    Thanks
    778
    Thanked
    1,586 times in 1,341 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)
    I am another PSU mod survivor: the degree in electronics was useful, but wearing leather gloves may have helped

    If you are after low noise then something modern with a single 120mm fan has to be the way to go. I have an Enermax noise-taker, next to a new Akasa PaxPower powered PC. The Akasa is _soo_ much quieter.

    Altering the airflow around the inside of a PSU with slower/quieter fans would worry me too. Have seen enough PSUs go loud & crispy for one lifetime!

    BTW, I went for switching off at the wall whilst the PC was turned on (BIOS screen ISTR) to get most of the energy out of my PSU. Even then, I did the soldering wearing leather gloves.

  14. #14
    Senior Member
    Join Date
    Jul 2005
    Location
    Birmingham
    Posts
    3,050
    Thanks
    248
    Thanked
    33 times in 31 posts
    • amjedm's system
      • Motherboard:
      • Asus A8N-Sli Premium
      • CPU:
      • Athlon X2 4200 S939 + Scythe Ninja rev A
      • Memory:
      • 2GB Corsair DDR PC3200
      • Storage:
      • Samsung T 160GB Sata in Scythe Quiet Box
      • Graphics card(s):
      • Nvidia 6600 256MB + Cooling Mod
      • PSU:
      • Enermax Noisetaker 485 (fanless) - lower chamber P180 fan doing the PSU cooling
      • Case:
      • P180 (modded - easier cable routing, front and rear grills cut)
      • Operating System:
      • XP Pro
      • Monitor(s):
      • LG 22" WTQ?
      • Internet:
      • O2 8MB (Standard)
    Quote Originally Posted by DanceswithUnix
    I am another PSU mod survivor: the degree in electronics was useful, but wearing leather gloves may have helped

    If you are after low noise then something modern with a single 120mm fan has to be the way to go. I have an Enermax noise-taker, next to a new Akasa PaxPower powered PC. The Akasa is _soo_ much quieter.

    Altering the airflow around the inside of a PSU with slower/quieter fans would worry me too. Have seen enough PSUs go loud & crispy for one lifetime!

    BTW, I went for switching off at the wall whilst the PC was turned on (BIOS screen ISTR) to get most of the energy out of my PSU. Even then, I did the soldering wearing leather gloves.
    Did you actually suffer an electric shock or are you thinking you would have if you hadn't worn the gloves?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. PSU Mod
    By r1zeek in forum Chassis and Mods
    Replies: 13
    Last Post: 15-02-2004, 07:40 PM
  2. cheap, quiet psu?
    By dgr in forum PC Hardware and Components
    Replies: 15
    Last Post: 14-11-2003, 09:26 PM
  3. Cheap case with quiet PSU needed!
    By Matthoulb in forum PC Hardware and Components
    Replies: 2
    Last Post: 28-10-2003, 11:10 AM
  4. Good, Cheap and Quiet PSU
    By Gunbuster in forum PC Hardware and Components
    Replies: 22
    Last Post: 03-10-2003, 11:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •