Printable View
The spec sheet for the S12-600 (http://www.seasonic.com/pdf/datasheet/01PC/S12.pdf), states that this PSU has:
6 x 4-pin molex connectors
2 x 4-pin FDD connectors
Please can anyone confirm if these are arranged as:
- two cables with 3 molex and 1 FDD
or
- two cables with 2 molex and 1 FDD
- one cable with 2 molex
This is the latest revision of the PSU which now has 4xSATA cables as oppossed to the one reviewed in Custom PC in October which only had 2xSATA.
Thanks
Luckily the side of my case is off :)
= two cables with 3 molex and 1 FDD
Yes, it's a 4 x SATA model
Thank you very much. :DQuote:
Originally Posted by toolsong
Now I have to decide if I really want this PSU as the the 3 cable option would have been much more useful to me as I have a 4-pin molex on the bottom left of my motherboard, and 2 x opticals, 1 x FDD, 1 x X-Fi Front Panel (uses FDD) and some fans & cathodes that all need power :(
Another quickie - are the cables all sleeved? do they have easy release molex plugs?
Seasonic are superb mate. Go for it!!
No but they are twisted togetherQuote:
Originally Posted by GingerNinja.net
YesQuote:
Originally Posted by GingerNinja.net
You can get a Molex to FDD splitter cable for a quid or two so I think you should focus more on critical performance factors :)
Alternatively buy a molex plug removal tool and a soldering iron then you can sleeve and mod the cables to your heart's content!
Thanks - chameleon springs it is then!Quote:
Originally Posted by toolsong
You're right, of course. I actually have a splitter with the X-Fi card, I think, so I will look at placement of my cathodes etc instead :)Quote:
Originally Posted by toolsong