LinkBack URL
About LinkBacksApparently my Arctic Cooling Freezer 64 Pro is the wrong way round - its running fine but obviously it would be better if it wasnt!!
Is there anyway of turing it round so that it is correct? I have a DFI nf4 ultra-d
thanks
Apparently my Arctic Cooling Freezer 64 Pro is the wrong way round - its running fine but obviously it would be better if it wasnt!!
Is there anyway of turing it round so that it is correct? I have a DFI nf4 ultra-d
thanks
(\__/)
(='.'=)
(")_(")
I don't think you can. It is kinda blocking my gfx and the cooling performance sucks.
I'm changing to a XP-90ST and hope that helps.
Going to move my Freezer64 Pro back to A8N-SLI Premium
Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery
Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
Display (Projector): Epson TW-3500 1080p
Speakers: Creative Megaworks THX550 5.1
Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro
Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2
Originally Posted by arthurleung
so wot is the cooler like with the asus..??
DFI's socket is rotated 90 degree, so the fan is either close to the PSU side or the GFX side. The fan is special, so it can only mount one way. There is only 1cm clearance to the GFX. But if you mount it on another side, it will blow air down and will compete with the PSU's fan for air, so it will reduce airflow to both PSU and the heatsink.
On the other hand the Asus board have the "normal" arrangement which you mount it so the fan is blowing toward the exhaust fan, suck air in easier and somehow cool the ram as well.
Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery
Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
Display (Projector): Epson TW-3500 1080p
Speakers: Creative Megaworks THX550 5.1
Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro
Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2
I HAVE A A8N32-SLI with the 580W Tagan 2Force (miss the bottom fan) .. so it will be pointing to the back fan like your asus wot were yours temps then..
also you can adjust the 64 so it points that way (on the base)
The temp is 48'C Full load on 2.7Ghz 1.45V, with Arctic Ceramique kicked in, fan at full speed. Think it was about 44'C back on the Asus board. But whether the onboard sensor is accurate I've no idea.
Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery
Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
Display (Projector): Epson TW-3500 1080p
Speakers: Creative Megaworks THX550 5.1
Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro
Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2
i am getting 51 in idle .. and am thinking sensor is inaccurate wot is yours idle?
Something around 37'C idle back on my Premium
Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery
Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
Display (Projector): Epson TW-3500 1080p
Speakers: Creative Megaworks THX550 5.1
Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro
Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2
I have the arctic freezer 64 on my A8n-SLI. cooling is excellent.
My System: Coolermaster Centurion 5 (black) case, Intel E6750 Core2Duo, Tagan Easy-Con 530W, Asus P5B Deluxe WIFI, OCZ 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 CL 4-4-4-15 PLATINUM XTC, Samsung SpinPoint 200Gb SATA2 / 2 x Maxtor DiamondMax 10 200Gb SATA, 256Mb Sapphire ATI PCI-E X1950PRO, Creative X-Fi Xtreme 7.1, 19" Daewoo W9ZQ Black Widescreen TFT, 4Mb Virgin Cable Broadband (formerly Blueyonder) with Linksys WRT54GL Wireless-G and DD-WRT firmware.
mine idles at around 30 degrees, and i just used the TIM that was pre-applied to the heatsink. I'm well chuffed with it
I actually found the old freezer 64 to be better on my ultra-d because it was pointing towards the exhaust fan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote