The pcie lane config on the dfi nf4 sli dr is controlled by a series of jumpers
http://www.pcstats.com/articleimages...f4sli_jump.jpg
is it possible to set the jumpers fo thet the bottom x16 slot gets 16 lanes?
Printable View
The pcie lane config on the dfi nf4 sli dr is controlled by a series of jumpers
http://www.pcstats.com/articleimages...f4sli_jump.jpg
is it possible to set the jumpers fo thet the bottom x16 slot gets 16 lanes?
no mate, 16+2 or 8+8. what do you want to use 16x for just out of interest?
in my cast the top x16 slot is jammed up very close to the top os the expansion area therfore I can't fit the dvi>d-sub adaptor in very easily
using either slot at 8x wont give you any prformance drop on your graphics, but i found that my pci soundcard didnt play nice when they were both set to 8x but with 1x card in.
I was under the belief that nvidia drives mandated that there be an nvidia gpu in the primary slot
Can't you get a short adapter lead? that should allow you to do it without having to move slots?
Dave
I can shoehorn an ati adaptor in it's just a pain
you can use your graphics card in either slot :)