what fan is in the PSU? (SB61G2)

sorry if this has been asked before but "PSU" and "fan" are under the required word search length.

I'm planning on changing the fan in PSU of my SB61G2 Reflexion and can't seem to find a spec on the PSU that shows the noise rating on the fan. Can anyone tell me. I've been offered

Size: 40 x 40 x 10 mm
> Connector: 3-pin Molex
> Airflow: 4,90 CFM
> Type: double-ball-bearing
> RPM: 5000 per minute
> Noise: < 24 dBA
> Power: 0,84 W
> Voltage: 12 V
> Life-span: 50.000 h

would this be much better? Its a Titan.
TIA
q

its an improvement, but try and get 1 with lower dba

http://www.xtr.me.uk/gallery/albums/SS51G/Dsc01053.jpg

that's the fan that was in my SS51G PSU.

any idea what the dbA rating is on it? should I be aiming for <20dbA?

40mm's a small fan, wanna get something nice and quiet. maybe take it altogether and stick the shuttle in the fridge. :D

just leave a slot to get the cds into the drive and get the beer out.

:)

SUNONSPECIFICATIONSMODEL: KD1204PFB1-81-1. Rated Voltage:12 VDC1-2. Operating Voltage Range:10.2-13.8 VDC1-3. Starting Voltage:8 VDC1-4. Rated Speed:7300 RPM ±1000 RPM1-5. Air Delivery:6.9 CFM1-6. Static Pressure:0.19 Inch-H2O1-7. Rated Current:0.06 AMP1-8. Rated Power:0.7 WATTS1-9. Noise Level:30.5 dB(A)1-10. Direction of Rotation:Counter-clockwise viewed front fan blade1-11. Operating Temperature:-10 to +70 Deg.C1-12. Storage Temperature:-40 to +70 Deg.C1-13. Bearing System:Precise ball bearing system1-14. Weight:16g1-15. Safety:UL/CUR/TUV/CE Approvals1-16. Vibration:Vibration of acceleration 1.5G andFrequency 5~50~5Hz is applied in the3 directions(X,Y,Z) for 30 minutes, eachDirection at the cycle of 1 minute

sorry for mess, was a copynpaste job

cool thanks!

i think i'll get the fan i mentioned above. seems 24dba is the best i can get.

can someone tell me if there is 1 or 2 fans in the SB61G2? I'm still waiting for it to be delivered so i can't check but i need to order the 40mm fans soon and need to know how many to get.

TIA

q

EDIT: saw this mentioned before but never seen the result: Has anyone removed the PSU fan from their shuttle altogether? Allowed it to run hot maybe? Sounds a little dangerous but there might be a solution.

Alternatively has anyone modded the PSU so that the ICE fan can cool both?

Try this article I wrote a while back - should answer yer questions!
Here