Results 1 to 9 of 9

Thread: Enough Power for my components?

  1. #1
    Registered+
    Join Date
    Nov 2005
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Enough Power for my components?

    I have an Antec Smartpower 400 watt powersupply. My list of components are as follows: X850 PRO AGP, Asus P4C800 Deluxe, P4 2.6 Northwood, 2gb Corsair 2-3-2-5, Audigy 2 ZS Platinum (with infrared external drive installed), 6 case fans (4 120mm/2 80mm), 3 harddrives (1 30gb ATA 100 IDE/2 SATA 80gb). If that's too much for the PSU, would I be fine if I took out the 30gb IDE drive? I'm only using it as a swap drive. I appreciate any and all help I can get. Thanks.

  2. #2
    Gentoo Ricer
    Join Date
    Jan 2005
    Location
    Galway
    Posts
    11,048
    Thanks
    1,016
    Thanked
    944 times in 704 posts
    • aidanjt's system
      • Motherboard:
      • Asus Strix Z370-G
      • CPU:
      • Intel i7-8700K
      • Memory:
      • 2x8GB Corsiar LPX 3000C15
      • Storage:
      • 500GB Samsung 960 EVO
      • Graphics card(s):
      • EVGA GTX 970 SC ACX 2.0
      • PSU:
      • EVGA G3 750W
      • Case:
      • Fractal Design Define C Mini
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Asus MG279Q
      • Internet:
      • 240mbps Virgin Cable
    I have a simular setup (except my CPU munches more juice).. Doing fine with a 420W PSU.
    Quote Originally Posted by Agent View Post
    ...every time Creative bring out a new card range their advertising makes it sound like they have discovered a way to insert a thousand Chuck Norris super dwarfs in your ears...

  3. #3
    sneaks quietly away. schmunk's Avatar
    Join Date
    May 2004
    Location
    Wiki Wiki Wild West side... of Sussex
    Posts
    4,424
    Thanks
    40
    Thanked
    163 times in 121 posts
    • schmunk's system
      • Motherboard:
      • Abit NF7-S v2.0
      • CPU:
      • AMD Athlon-M 2500+
      • Memory:
      • 1GB of Corsair BH-5 and 512MB of something else
      • Storage:
      • 160GB Seagate Barracuda
      • Graphics card(s):
      • ATI Radeon X800Pro, flashed to XT
      • PSU:
      • Hiper Type-M ~400W
      • Case:
      • Antec cheapy
      • Monitor(s):
      • AG Neovo F19 LCD
      • Internet:
      • Virgin Media 4MB/s
    Yep, it'll be fine, as Antec PSUs are good quality and will actually deliver what they promise.

    A 400w QTec, mind...

  4. #4
    Throbbing Member
    Join Date
    Aug 2004
    Location
    Scotlandshire
    Posts
    640
    Thanks
    15
    Thanked
    9 times in 8 posts
    • 8bit's system
      • Motherboard:
      • MSI Z170A-G43 PLUS
      • CPU:
      • Intel i7-6700K
      • Memory:
      • 2x Kingston HyperX Fury Black (8GB)
      • Storage:
      • 1x Crucial MX100 512GB, 1x Western Digital Caviar Black 1TB (WD1001FALS)
      • Graphics card(s):
      • Sapphire AMD R9 390 Nitro
      • PSU:
      • Corsair RM650x
      • Case:
      • Corsair Carbide Air 540
      • Operating System:
      • Windows 10 Home
      • Monitor(s):
      • LG 29UM67 29", 21:9, 2560x1080
      • Internet:
      • PlusNet Fibre
    http://extreme.outervision.com/psucalculator.jsp

    Go there, stick your components into that, see what it says. I'd imagine that would be fine, I used to run my whole rig (with more components than it's got now) off a 400w without problems.

    However, if you're using that PSU just now with all that stuff and it's not giving you problems then you've already got the answer to your question right there!

    HTH
    8
    "shiro" - Windows 11 Home x64 :: Intel i5-12600K :: Corsair H115i :: MSI Z690-A Pro :: 2x 16GB Kingston HyperX DDR5 :: NVidia 4070 Super FE :: Corsair Force MP600 (1TB) :: WD Caviar Black (2TB) :: WD Caviar Green (2TB) :: Corsair Carbide Air 540 (white) :: LG 32QK500 2560x1440 :: Razer Pro Click :: Cherry KC6000 Slim ::

  5. #5
    Senior Member FatalSaviour's Avatar
    Join Date
    Jun 2004
    Location
    London/Oxford/York
    Posts
    1,876
    Thanks
    42
    Thanked
    12 times in 11 posts
    • FatalSaviour's system
      • Motherboard:
      • MSI P55-GD80
      • CPU:
      • Intel Core i7 860
      • Memory:
      • 4x2GB GEiL PC17000
      • Storage:
      • 3x1000GB, 2x500GB (RAID1), 1x2TB
      • Graphics card(s):
      • GTX 470
      • PSU:
      • Corsair HX700
      • Case:
      • Antec P180
      • Operating System:
      • Win 7 x64
      • Monitor(s):
      • Dell U2311, Dell 2005FPW
      • Internet:
      • VM 30Mb
    A decent 400W PSU, (like the one that you've got) will be absolutely fine.
    It may not have a 6pin PCIe connector depending on how modern the PSU is, but other than that, it'll do you well
    Quote Originally Posted by Noni
    What the hell does "WTH" mean


  6. #6
    Senior Member MantisCSS's Avatar
    Join Date
    Apr 2006
    Location
    Basingstoke
    Posts
    898
    Thanks
    0
    Thanked
    0 times in 0 posts
    wuda thought that would be sufficient. use the PSU calculator. but this question has been asked a few tiems, and alot of ppl run quite alot of stuff on PSU's with a fairly low voltage.
    PowerColor HD 4850 512MB
    Gigabyte GA-EP35-DS3L iP35 Socket 775 8 channel audio ATX Motherboard
    Intel Core 2 Duo E7200 2.53GHz
    Coolermaster Centurion 5 All Black
    Corsair 450W VX 450W PSU
    Samsung SpinPoint F1 500GB

  7. #7
    Who the $%£# told you you could eat my cookies?! Oobie-'s Avatar
    Join Date
    Aug 2005
    Posts
    1,299
    Thanks
    96
    Thanked
    17 times in 16 posts
    Thanks for that link 8bit. Will be most helpful when I sort my components out, thanks
    The antec p150 has a 430 watt PSU - need to figure out if that will suffice for my rig when i get it!

  8. #8
    Member
    Join Date
    May 2006
    Posts
    89
    Thanks
    0
    Thanked
    0 times in 0 posts
    Yerp, I think it would be sufficient as it comes from reputable manufacturers. They would rate it as actual power usage but if you buy a cheapo PSU, they rated it as Peak power Usage which can only be sustained for a couple of minutes. I

  9. #9
    Throbbing Member
    Join Date
    Aug 2004
    Location
    Scotlandshire
    Posts
    640
    Thanks
    15
    Thanked
    9 times in 8 posts
    • 8bit's system
      • Motherboard:
      • MSI Z170A-G43 PLUS
      • CPU:
      • Intel i7-6700K
      • Memory:
      • 2x Kingston HyperX Fury Black (8GB)
      • Storage:
      • 1x Crucial MX100 512GB, 1x Western Digital Caviar Black 1TB (WD1001FALS)
      • Graphics card(s):
      • Sapphire AMD R9 390 Nitro
      • PSU:
      • Corsair RM650x
      • Case:
      • Corsair Carbide Air 540
      • Operating System:
      • Windows 10 Home
      • Monitor(s):
      • LG 29UM67 29", 21:9, 2560x1080
      • Internet:
      • PlusNet Fibre
    Quote Originally Posted by Oobie-
    Thanks for that link 8bit. Will be most helpful when I sort my components out, thanks
    The antec p150 has a 430 watt PSU - need to figure out if that will suffice for my rig when i get it!
    No worries, I first saw it here on HEXUS anyway. What goes around comes around
    "shiro" - Windows 11 Home x64 :: Intel i5-12600K :: Corsair H115i :: MSI Z690-A Pro :: 2x 16GB Kingston HyperX DDR5 :: NVidia 4070 Super FE :: Corsair Force MP600 (1TB) :: WD Caviar Black (2TB) :: WD Caviar Green (2TB) :: Corsair Carbide Air 540 (white) :: LG 32QK500 2560x1440 :: Razer Pro Click :: Cherry KC6000 Slim ::

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 23
    Last Post: 18-06-2007, 08:31 AM
  2. ATX12v power
    By eletero in forum Help! Quick Relief From Tech Headaches
    Replies: 3
    Last Post: 07-06-2005, 11:47 AM
  3. WD Raptor SATA power connector
    By Taz in forum PC Hardware and Components
    Replies: 1
    Last Post: 08-05-2005, 11:56 AM
  4. Power hungry components in a SFF?
    By Punto in forum PC Hardware and Components
    Replies: 2
    Last Post: 02-09-2004, 01:49 AM
  5. how to choose a PSU?
    By loriel60 in forum PC Hardware and Components
    Replies: 8
    Last Post: 14-01-2004, 04:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •