Hey Clunk you think you are unluky
I think my P5B Deluxe is DOE to! I picked it up from Scan today
It will not post
This is my third Asus board this month.
I was thinking
If you take all the ram out and then turn the PC on it should throw a wobler and beep
Any ideas?
Stop getting Asus is the solution to that :S
Core 2 Duo E6600 @ 3.2Ghz (400Mhzx8) 1.52V (set in bios, 1.47v real) | 4GB GeIL PC6400 4-4-4-12 | Gigabyte DQ6 @ 1600Mhz | HD2900XT 1GB | Enermax Infiniti 720W | Silverstone TJ07-B with custom watercooling | BenQ FP241WZ
3dmark05 - 13140 | 3dmark06 - 6698 | SuperPi 1M - 15s
You May have a point there ExceededGoku
sorry to hear that mate.
have you tried a single stick of cheap ddr2 ram in it? i had to use some to boot to the bios and up the voltage to 2.2v before this ds would recognise the pc2-6400 ram. failing that, yeah, dont buy asus
You owe it to yourself to click here really.Originally Posted by Blitzen
I have just tried one stick of my sons PC5400 no joy
I also took out all of his ram then switched his PC on it gave out long intermittent beeps
Its an Abit AW8
bugger.
good luck with the abit
You owe it to yourself to click here really.
The Abit is fine i was just thinking that the asus board should be beeping with no ram installed alsobugger.
good luck with the abit
not if its already dead...do the fans spin up? they didnt on mine.The Abit is fine i was just thinking that the asus board should be beeping with no ram installed also
You owe it to yourself to click here really.
Yes the fans spin up ok it just will not post or beep or anything but spin the fans
Also whats with the invisible bios chip on these boards?
It's there pretty plain to see on mine
Looks like a sticker on the PCB to me
I'm having some strange Vcore isues with mine. Even after flashing to the 801 bios I only get Auto as an option in the Bios and the on the fly Ai Booster thing starts at 1.4v.
asus and voltages = stupidity (voltage jumps and incorrect settings)
Core 2 Duo E6600 @ 3.2Ghz (400Mhzx8) 1.52V (set in bios, 1.47v real) | 4GB GeIL PC6400 4-4-4-12 | Gigabyte DQ6 @ 1600Mhz | HD2900XT 1GB | Enermax Infiniti 720W | Silverstone TJ07-B with custom watercooling | BenQ FP241WZ
3dmark05 - 13140 | 3dmark06 - 6698 | SuperPi 1M - 15s
What CPU are you using out of interest
I flashed my P5W to 901 and the wirless disapeared so i tried to flash it back and I got an error stating the bios version was old and could not be flashed
The voltage is rock steady. It's just steady at 1.3v.
Conroe E6600
There is an option in the widows based flash utility to alow you to downgrade the Bios.
There are currently 1 users browsing this thread. (0 members and 1 guests)
SCAN.care@HEXUS
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote